aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp/dboard
Commit message (Expand)AuthorAgeFilesLines
* ubx: add temperature compensation modeMark Meserve2019-06-121-0/+41
* twinrx: increase rev c lo1 charge pump default valueMark Meserve2019-05-281-1/+1
* cmake: Remove superfluous "E300/E320 enabled" messagesMartin Braun2019-05-161-2/+0
* twinrx: set lo2 to use new low spur tuning modeMark Meserve2019-05-072-6/+3
* twinrx: add lo charge pump propertiesMark Meserve2019-05-025-19/+116
* e310/e320: Move E310 to MPM architecture and refactorSugandha Gupta2019-05-0119-877/+1484
* uhd: mpm: update all license header w/ "-or-later"Brent Stapleton2019-03-082-2/+2
* rh: Fix typo in setting up RX frontendAlex Williams2019-02-271-1/+1
* rh: revise correction data usageMark Meserve2019-02-213-11/+19
* rh: reset rx iq balance on initMark Meserve2019-02-211-0/+1
* uhd: Replace all usage of boost::noncopyable with uhd::noncopyableMartin Braun2019-02-151-2/+2
* rh: increase timeout of set_rate's rpc callMark Meserve2019-01-211-1/+4
* uhd: mpm: apply clang-format to all filesBrent Stapleton2019-01-1620-2574/+1926
* formatting: remove vim hints in headersBrent Stapleton2019-01-167-7/+0
* uhd: skip formatting misc arrays, maps, etc.Brent Stapleton2019-01-164-1/+10
* rh: add support for identify argMark Meserve2019-01-102-12/+40
* rh: implement set_rateMark Meserve2019-01-103-9/+40
* rh: general code cleanupMark Meserve2019-01-101-4/+5
* rh: add support for iq and dc correction filesMark Meserve2019-01-094-18/+88
* rh: adjust frequencies for lo filter bankMark Meserve2019-01-081-1/+1
* TwinRX: Fix tuningMichael West2019-01-021-1/+1
* N310 E320: Add initialization of TX bandwidthmichael-west2018-12-192-2/+2
* uhd/mpm: eiscat: Various changesRyan Marlow2018-12-192-28/+219
* rh: add highband spur reduction optionMark Meserve2018-12-124-4/+83
* TwinRX: Make routing to LO1 and LO2 mutually exclusivemichael-west2018-12-102-25/+15
* TwinRX: Tuning improvementsmichael-west2018-12-101-2/+7
* TwinRX: Fix initializationmichael-west2018-12-101-62/+60
* rh: fixed lowband tuningMark Meserve2018-12-071-1/+2
* rh: add handling for "all" loMark Meserve2018-12-042-9/+104
* mg: Unindent falsely indented block of codeMartin Braun2018-11-301-29/+29
* rh: add support for atr frontend controlMark Meserve2018-11-295-92/+103
* rh: fix typo in lo distribution propertiesMark Meserve2018-11-161-2/+2
* rh: fix typo in initMark Meserve2018-11-141-1/+1
* cmake: Update coding style to use lowercase commandsMartin Braun2018-11-145-20/+20
* rh: initialize switchesMark Meserve2018-11-071-3/+10
* rh: adjust tx lo gain tableMark Meserve2018-11-052-7/+12
* rh: add lo distribution supportMark Meserve2018-11-054-0/+161
* rh: fix handling of spur_dodging argMark Meserve2018-11-013-7/+30
* rh: add support for rhodium devicesMark Meserve2018-10-2511-1/+3479
* mg: fixup set_rx_antennaTrung Tran2018-10-041-1/+1
* e320: Fix master_clock_rate settingSugandha Gupta2018-09-241-0/+4
* mg: clipping frequencyTrung Tran2018-09-142-4/+7
* e320: gpio: Fix front panel GPIO readbackSugandha Gupta2018-09-121-1/+4
* twinrx: enable ch1 lo amps if ch2 is using an external lo sourceMark Meserve2018-08-211-1/+13
* e320: Fix tx/rx atr - antenna and frequency settingsSugandha Gupta2018-08-095-30/+32
* fixup! mpm: mg: add set_master_clock_rate memberMartin Braun2018-08-031-2/+2
* mg: Allow calling set_rate() at runtimeMartin Braun2018-08-022-6/+38
* mpm: mg: add set_master_clock_rate memberDaniel Jepson2018-08-022-0/+13
* uhd: initial commit of UHD support for E320Brent Stapleton2018-07-1810-0/+1866
* UBX: Add support for phase synchronization at LTE clock ratesMichael West2018-07-171-12/+18