| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
| |
This commit removes all files and parts of files that are used by
proto-RFNoC only.
uhd: Fix include CMakeLists.txt, add missing files
|
| |
|
|
|
|
|
| |
Co-Authored-By: Alex Williams <alex.williams@ni.com>
Co-Authored-By: Sugandha Gupta <sugandha.gupta@ettus.com>
Co-Authored-By: Brent Stapleton <brent.stapleton@ettus.com>
Co-Authored-By: Ciro Nishiguchi <ciro.nishiguchi@ni.com>
|
| | |
|
| |
|
|
|
| |
db0 is used as the master for driving the radio path and must be the dboard
used to set the master clock rate.
|
| |
|
|
|
|
| |
The function for setting up the RX frontend was erroneously looking at
previous TX settings to determine whether to submit a command. This
fixes the issue.
|
| |
|
|
|
|
|
|
|
|
| |
- UHD's calibration utilities use the LO frequency, so this is the
frequency we should be using too.
- Disables loaded corrections in lowband, as the utilities will not
generate valid corrections at these frequencies. Manual corrections
can still be added via the property tree.
- Changed corrections logging to include frequency and less certainty
of the correction file's existence.
|
| |
|
|
|
| |
- Fixes a bug where a previous setting could carry over between
sessions.
|
| | |
|
| |
|
|
|
| |
Remove trailing vim hints in header files. This functionality will be
replaced by clang-format.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
| |
- Add default bandwidth range
- Add default mash order constant
- Delete MPM todos
- Cleanup whitespace in MPM python code
- Add docstring for is_lo_dist_present
|
| |
|
|
|
|
|
| |
- Update corrections on frequency or LO source change
- Add legacy EEPROM properties
- Move DSP control initialization earlier
- Fix TX antenna list property
|
| |
|
|
|
| |
- Moves the cutover frequency for the 900 MHz LO filter from 900 to 975 MHz.
This fixes an image issue in TX when transmitting near 325 MHz or 900 MHz.
|
| |
|
|
|
|
|
|
|
| |
- When highband_spur_reduction is enabled, the lowband LO will be disabled
during highband operation. This improves spur performance, but also renders
timed tune commands unusable due to the MPM call.
- A warning is logged if the user uses a timed tune command that would change
the state of the lowband LO, as the MPM call will occur immediately instead
of at the given command time.
|
| |
|
|
| |
- Sometimes, SW1 was not updated when a switch to lowband occurred.
|
| |
|
|
|
|
|
| |
- Adds "all" LO properties.
- Adds handling of "all" value in all LO functions.
- Re-adds value_error exceptions for illegal settings of LO2, which previously
caused issues when the "all" LO was used from multi_usrp.
|
| | |
|
| | |
|
| |
|
|
| |
- This broke tx streaming via the multi_usrp API.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Also updates our coding style file.
Ancient CMake versions required upper-case commands. Later command
names became case-insensitive. Now the preferred style is lower-case.
Run the following shell code (with GNU compliant sed):
cmake --help-command-list | grep -v "cmake version" | while read c; do
echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g'
done > convert.sed \
&& git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' \
'*CMakeLists.txt' | xargs -0 gsed -i -f convert.sed && rm convert.sed
(Make sure the backslashes don't get mangled!)
|
| | |
|
| |
|
|
| |
- Improves performance for frequencies greater than 3.5 GHz
|
| |
|
|
|
|
|
|
|
| |
- This is a combination of 5 commits.
- rh: add lo distribution board gpio expander
- rh: add lo distribution mpm functions
- rh: add code to conditionally initialize lo distribution
- rh: change empty i2c device from exception to assertion
- rh: add lo distribution board control
|
| | |
|
|
|
Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com>
Co-authored-by: Alex Williams <alex.williams@ni.com>
Co-authored-by: Derek Kozel <derek.kozel@ni.com>
|
