aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/usrp/dboard/rhodium
Commit message (Collapse)AuthorAgeFilesLines
* n320: Add correction APIs to radio_control objectMartin Braun2021-05-062-0/+63
| | | | | | | | | | The N320, like the X310, has some frontend corrections (IQ balance, DC offset) which can be controlled from software. The property tree entries exist for these, but the radio_control APIs do not (which also disables the multi_usrp APIs). This makes it harder to disable DC offset or IQ balance corrections from software, and disables our calibration utilities.
* N320: Fix IQ mapping and frontend correctionsmichael-west2021-04-221-2/+4
| | | | | | | | Changed register offset from 4 bytes to 8 bytes. The registers in the frontend were not being properly addressed, so calibration, IQ mapping, and frontend corrections were not working properly. Signed-off-by: michael-west <michael.west@ettus.com>
* N320: Fix available antennasmichael-west2021-04-221-2/+2
| | | | | | Available antennas for TX and RX were swapped. Signed-off-by: michael-west <michael.west@ettus.com>
* n320: Fix address for RX frontend controlMartin Braun2021-04-121-1/+1
| | | | The RX FE core was using the address for the TX FE core.
* uhd: Fix radio_control-related method constnessMartin Braun2021-03-171-2/+2
| | | | | | | | | | | | | | | | | The const-ness of some radio_control differed between base class and implementation. This fixes the consistency, but also makes sure these methods follow the rules for when to make methods 'const'. The following rules apply: - Methods that query static capabilities are const. Here, we made get_tx_lo_sources() const (the RX version was already const). - Getters that may have to interact with the device (e.g., peek a register) are not const, because the act of peeking is usually also non-const. Here, we changed get_rx_lo_export_enabled() to non-const. - All base classes are fixed such that the derived classes and the base classes have the same const-ness. Clang was warning about differences. This can cause very tricky bugs, where the radio_control_impl version can get called instead of the intended child class.
* rh: Remove unused constantMartin Braun2021-03-041-1/+0
| | | | This fixes a clang warning.
* rh: cpld control: Comment out gain table addressMartin Braun2021-03-041-1/+1
| | | | This fixes a clang warning.
* rh: Remove use of magic number of identify durationMartin Braun2021-03-042-3/+3
| | | | This fixes a clang compiler warning.
* host: Update code base using clang-tidyMartin Braun2021-03-041-48/+55
| | | | | | | | | The checks from the new clang-tidy file are applied to the source tree using: $ find . -name "*.cpp" | sort -u | xargs \ --max-procs 8 --max-args 1 clang-tidy --format-style=file \ --fix -p /path/to/compile_commands.json
* uhd: Fix infinite recursion in N3xx timed commandsCiro Nishiguchi2020-05-122-16/+0
| | | | | | The implementation of set_command_time was calling wb_iface set_time, which in turn makes a recursive call to set_command_time. This removes the erroneous recursive call.
* rh: Remove compiler warningMartin Braun2020-04-171-2/+4
| | | | | | | | | Adds UHD_UNUSED() to tag variables that is only used in a UHD_LOG_TRACE() macro. Note this would be also be possible by tagging the local functions {rx,tx}_band_to_log as unused, but g++ does not support that specific kind of attribute, at least in the current versions.
* uhd: Apply clang-format against all .cpp and .hpp files in host/Martin Braun2020-03-036-537/+418
| | | | | Note: template_lvbitx.{cpp,hpp} need to be excluded from the list of files that clang-format gets applied against.
* mg/rh/rfnoc: Harmonize peripheral registersMartin Braun2019-11-261-2/+2
| | | | | - Move the SPI addresses out of radio_control_impl - Fix the GPIO address spaces for N310/N300
* uhd: Replace usage of boost smart pointers with C++11 counterpartsMartin Braun2019-11-262-2/+2
| | | | | | | | | | | | | | | | | | | This removes the following Boost constructs: - boost::shared_ptr, boost::weak_ptr - boost::enable_shared_from_this - boost::static_pointer_cast, boost::dynamic_pointer_cast The appropriate includes were also removed. All C++11 versions of these require #include <memory>. Note that the stdlib and Boost versions have the exact same syntax, they only differ in the namespace (boost vs. std). The modifications were all done using sed, with the exception of boost::scoped_ptr, which was replaced by std::unique_ptr. References to boost::smart_ptr were also removed. boost::intrusive_ptr is not removed in this commit, since it does not have a 1:1 mapping to a C++11 construct.
* Remove proto-RFNoC filesMartin Braun2019-11-262-2/+0
| | | | | | | This commit removes all files and parts of files that are used by proto-RFNoC only. uhd: Fix include CMakeLists.txt, add missing files
* x300/mpmd: Port all RFNoC devices to the new RFNoC frameworkMartin Braun2019-11-2612-2622/+2504
| | | | | | | Co-Authored-By: Alex Williams <alex.williams@ni.com> Co-Authored-By: Sugandha Gupta <sugandha.gupta@ettus.com> Co-Authored-By: Brent Stapleton <brent.stapleton@ettus.com> Co-Authored-By: Ciro Nishiguchi <ciro.nishiguchi@ni.com>
* rh: Add missing includes in rhodium_cpld_ctrl.hppMartin Braun2019-10-111-2/+4
|
* n320: updated rhodium dboard mcr initializationnitest2019-10-101-1/+2
| | | | | db0 is used as the master for driving the radio path and must be the dboard used to set the master clock rate.
* rh: Fix typo in setting up RX frontendAlex Williams2019-02-271-1/+1
| | | | | | The function for setting up the RX frontend was erroneously looking at previous TX settings to determine whether to submit a command. This fixes the issue.
* rh: revise correction data usageMark Meserve2019-02-213-11/+19
| | | | | | | | | | - UHD's calibration utilities use the LO frequency, so this is the frequency we should be using too. - Disables loaded corrections in lowband, as the utilities will not generate valid corrections at these frequencies. Manual corrections can still be added via the property tree. - Changed corrections logging to include frequency and less certainty of the correction file's existence.
* rh: reset rx iq balance on initMark Meserve2019-02-211-0/+1
| | | | | - Fixes a bug where a previous setting could carry over between sessions.
* rh: increase timeout of set_rate's rpc callMark Meserve2019-01-211-1/+4
|
* formatting: remove vim hints in headersBrent Stapleton2019-01-161-1/+0
| | | | | Remove trailing vim hints in header files. This functionality will be replaced by clang-format.
* rh: add support for identify argMark Meserve2019-01-102-12/+40
|
* rh: implement set_rateMark Meserve2019-01-103-9/+40
|
* rh: general code cleanupMark Meserve2019-01-101-4/+5
| | | | | | | | - Add default bandwidth range - Add default mash order constant - Delete MPM todos - Cleanup whitespace in MPM python code - Add docstring for is_lo_dist_present
* rh: add support for iq and dc correction filesMark Meserve2019-01-094-18/+88
| | | | | | | - Update corrections on frequency or LO source change - Add legacy EEPROM properties - Move DSP control initialization earlier - Fix TX antenna list property
* rh: adjust frequencies for lo filter bankMark Meserve2019-01-081-1/+1
| | | | | - Moves the cutover frequency for the 900 MHz LO filter from 900 to 975 MHz. This fixes an image issue in TX when transmitting near 325 MHz or 900 MHz.
* rh: add highband spur reduction optionMark Meserve2018-12-124-4/+83
| | | | | | | | | - When highband_spur_reduction is enabled, the lowband LO will be disabled during highband operation. This improves spur performance, but also renders timed tune commands unusable due to the MPM call. - A warning is logged if the user uses a timed tune command that would change the state of the lowband LO, as the MPM call will occur immediately instead of at the given command time.
* rh: fixed lowband tuningMark Meserve2018-12-071-1/+2
| | | | - Sometimes, SW1 was not updated when a switch to lowband occurred.
* rh: add handling for "all" loMark Meserve2018-12-042-9/+104
| | | | | | | - Adds "all" LO properties. - Adds handling of "all" value in all LO functions. - Re-adds value_error exceptions for illegal settings of LO2, which previously caused issues when the "all" LO was used from multi_usrp.
* rh: add support for atr frontend controlMark Meserve2018-11-295-92/+103
|
* rh: fix typo in lo distribution propertiesMark Meserve2018-11-161-2/+2
|
* rh: fix typo in initMark Meserve2018-11-141-1/+1
| | | | - This broke tx streaming via the multi_usrp API.
* cmake: Update coding style to use lowercase commandsMartin Braun2018-11-141-3/+3
| | | | | | | | | | | | | | | | | Also updates our coding style file. Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code (with GNU compliant sed): cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done > convert.sed \ && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' \ '*CMakeLists.txt' | xargs -0 gsed -i -f convert.sed && rm convert.sed (Make sure the backslashes don't get mangled!)
* rh: initialize switchesMark Meserve2018-11-071-3/+10
|
* rh: adjust tx lo gain tableMark Meserve2018-11-052-7/+12
| | | | - Improves performance for frequencies greater than 3.5 GHz
* rh: add lo distribution supportMark Meserve2018-11-054-0/+161
| | | | | | | | | - This is a combination of 5 commits. - rh: add lo distribution board gpio expander - rh: add lo distribution mpm functions - rh: add code to conditionally initialize lo distribution - rh: change empty i2c device from exception to assertion - rh: add lo distribution board control
* rh: fix handling of spur_dodging argMark Meserve2018-11-013-7/+30
|
* rh: add support for rhodium devicesMark Meserve2018-10-2510-0/+3475
Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com> Co-authored-by: Alex Williams <alex.williams@ni.com> Co-authored-by: Derek Kozel <derek.kozel@ni.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-04 12:42:51 +0000