aboutsummaryrefslogtreecommitdiffstats
path: root/host/lib/include
Commit message (Collapse)AuthorAgeFilesLines
* host: Add ability to get time from Radio blockmichael-west2021-11-171-0/+10
| | | | | | Add API calls to Radio control to get ticks and time. Signed-off-by: michael-west <michael.west@ettus.com>
* host: Add gpio_voltage discoverable featureLane Kolbly2021-11-051-0/+21
|
* host: Add RPC calls for GPIO voltageLane Kolbly2021-11-051-0/+9
|
* host: Add GPIO functions to MPM RPC shimLane Kolbly2021-11-031-0/+5
|
* rfnoc: Remove cruft from UHD 3 (constants)Martin Braun2021-11-021-0/+1
| | | | | | | | | | | | | This removes some constants from UHD that were left over from RFNoC/UHD 3.x. They are unused. rfnoc_rx_to_file had a commented-out section that was also UHD-3 only. Note that rfnoc/constants.hpp is pretty bare now, and could be removed. However, it is in the public header section, so we shall leave the used constants where they are. This requires fixing includes in mgmt_portal.cpp.
* uhd: update num_recv_frames calculation for ctrl linksAndrew Lynch2021-11-021-1/+4
|
* host: gpio: Create gpio_atr_offsets to store GPIO registersLane Kolbly2021-10-271-24/+47
| | | | | | | Refactors register addresses into a gpio_atr_offsets structure which contains the various register addresses. This allows creating other devices with different GPIO register layouts with greater ease, and eliminates the use of macros (yay!)
* uhd: Replace Boost mutexes and locks with standard optionsMartin Braun2021-10-193-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a very mechanical task that could almost have been done with sed. Boost versions of mutexes and locks were removed, and replaced with std:: versions. The replacement tables are as follows: == Mutexes == - boost::mutex -> std::mutex - boost::recursive_mutex -> std::recursive_mutex Mutexes behave identically between Boost and std:: and have the same API. == Locks == C++11 has only two types of lock that we use/need in UHD: - std::lock_guard: Identical to boost::lock_guard - std::unique_lock: Identical to boost::unique_lock Boost also has boost::mutex::scoped_lock, which is a typedef for boost::unique_lock<>. However, we often have used scoped_lock where we meant to use lock_guard<>. The name is a bit misleading, "scoped lock" sounding a bit like an RAII mechanism. Therefore, some previous boost::mutex::scoped_lock are now std::lock_guard<>. std::unique_lock is required when doing more than RAII locking (i.e., unlocking, relocking, usage with condition variables, etc.). == Condition Variables == Condition variables were out of the scope of this lock/mutex change, but in UHD, we inconsistently use boost::condition vs. boost::condition_variable. The former is a templated version of the latter, and thus works fine with std::mutex'es. Therefore, some boost::condition_variable where changed to boost::condition. All locks and mutexes use `#include <mutex>`. The corresponding Boost includes were removed. In some cases, this exposed issues with implicit Boost includes elsewhere. The missing explicit includes were added.
* mpmd: Add discoverable feature for trig i/o modeGrant Meyerhoff2021-09-021-1/+16
|
* uhd: streamer: Restore original recv(0) semanticsAaron Rossetto2021-08-201-0/+32
| | | | | | | | | A recv() of zero samples on an RX stream should return immediately (i.e., without respect to the timeout and regardless of the availability of samples), surfacing any stream error conditions via metadata. This convention was broken in a2f10ee9, causing a recv() of zero samples to wait for the entire timeout period and then return ERROR_CODE_TIMEOUT if no samples are available. This commit restores the desired semantics.
* b200: Move the B200 radio control core into usrp/b200/Martin Braun2021-07-201-49/+0
| | | | | | | | | | | | This serves two purposes: - This file no longer goes into the compiled DLL if B200 is disabled - Discourage use of this file for new devices, making it clear that this architecture is no longer used The file itself is left untouched, only the class is renamed from radio_ctrl_core_3000 to b200_radio_ctrl_core. Note: In UHD 3, this file was also used by N230.
* uhd: Remove includes of list_of.hpp where appropriateMartin Braun2021-06-241-1/+0
| | | | This Boost header is included in some places, despite not being used.
* uhd: Remove all occurences of boost::math::*round()Martin Braun2021-06-241-2/+2
| | | | | | | Its behaviour is almost identical to std::lround, which we use instead. The only downside of std::lround is that it always returns a long, which we don't always need. We thus add some casts for those cases to make the compiler happy.
* debug_dboard: Fix compiler warningMartin Braun2021-06-221-1/+1
| | | | Superfluous 'this' capture.
* zbx: Fix clang compiler warningsMartin Braun2021-06-224-34/+14
| | | | | | | | - Missing override - Superfluous 'this' lambda capture - Register state in zbx_cpld_ctrl was being initialized too late (this is actually a bug depending on compiler version) - Remove lots of unused fields from experts
* zbx: Fix compilation on clang-10Martin Braun2021-06-222-4/+4
| | | | | | The ostream<< overloads where in the wrong namespace to be found by the expert framework. Other compilers are more forgiving; not so clang 10. This enables compilation on that compiler.
* uhd: Add callback for setting sync_sourcesGrant Meyerhoff2021-06-171-0/+4
|
* uhd: Add support for the USRP X410Lars Amsel2021-06-1015-7/+3432
| | | | | | | | | | | | | | | | Co-authored-by: Lars Amsel <lars.amsel@ni.com> Co-authored-by: Michael Auchter <michael.auchter@ni.com> Co-authored-by: Martin Braun <martin.braun@ettus.com> Co-authored-by: Paul Butler <paul.butler@ni.com> Co-authored-by: Cristina Fuentes <cristina.fuentes-curiel@ni.com> Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com> Co-authored-by: Virendra Kakade <virendra.kakade@ni.com> Co-authored-by: Lane Kolbly <lane.kolbly@ni.com> Co-authored-by: Max Köhler <max.koehler@ni.com> Co-authored-by: Andrew Lynch <andrew.lynch@ni.com> Co-authored-by: Grant Meyerhoff <grant.meyerhoff@ni.com> Co-authored-by: Ciro Nishiguchi <ciro.nishiguchi@ni.com> Co-authored-by: Thomas Vogel <thomas.vogel@ni.com>
* multi_usrp: Factor out make_overall_tune_range() and fix limitsMartin Braun2021-06-091-0/+37
| | | | | | | | | This function had an issue where it might return negative frequency values. A quick fix was to limit it to positive frequencies. Since this function was duplicated between multi_usrp and multi_usrp_rfnoc, this patch also moves it to a common location to not have to fix it twice.
* experts: Change coercion policy for regular prop nodesMartin Braun2021-05-041-2/+12
| | | | | | | | | | | | | | | | The experts framework has two ways of integrating expert nodes into the property tree: add_prop_node() and add_dual_prop_node(). In the latter case, the experts should take care of coercion, and thus, we subscribe to the desired value. In the former case, this is not necessary, and precludes us from using set_coercer() with prop nodes on the prop tree. This change lets us use regular nodes in the expert framework that also use property tree coercers. As of now, there is not a single property node in UHD that uses add_prop_node() and also does any kind of coercion, so this change has no effect on current code (this is only used in TwinRX as of now).
* rfnoc: Add option to disable flow control on rx streamingmattprost2021-04-292-3/+10
| | | | | | | | | | | Disabling this feature will allow the USRP to send a continuous stream of Rx data to a host machine without throttling due to lack of flow control credits. This is unnecessary overhead on lossless transports such as pcie or aurora. Usage: add 'enable_fc=false' to stream_args.args Signed-off-by: mattprost <matt.prost@ni.com>
* rfnoc: radio: Add getter for SPC valueMartin Braun2021-03-191-0/+1
| | | | | | This adds uhd::rfnoc::radio_control::get_spc(). It can be overridden by radio implementations, but radio_control_impl has a sensible default implementation, return the value that is in the SPC radio register.
* lib: rpc: Add virtual dtor to RPC iface base classMartin Braun2021-03-171-0/+2
| | | | This avoids more clang compiler warnings.
* uhd: Fix radio_control-related method constnessMartin Braun2021-03-171-3/+2
| | | | | | | | | | | | | | | | | The const-ness of some radio_control differed between base class and implementation. This fixes the consistency, but also makes sure these methods follow the rules for when to make methods 'const'. The following rules apply: - Methods that query static capabilities are const. Here, we made get_tx_lo_sources() const (the RX version was already const). - Getters that may have to interact with the device (e.g., peek a register) are not const, because the act of peeking is usually also non-const. Here, we changed get_rx_lo_export_enabled() to non-const. - All base classes are fixed such that the derived classes and the base classes have the same const-ness. Clang was warning about differences. This can cause very tricky bugs, where the radio_control_impl version can get called instead of the intended child class.
* host: Update code base using clang-tidyMartin Braun2021-03-171-1/+1
| | | | | | | | | | | | The checks from the new clang-tidy file are applied to the source tree using: $ find . -name "*.cpp" | sort -u | xargs \ --max-procs 8 --max-args 1 clang-tidy --format-style=file \ --fix -p /path/to/compile_commands.json Note: This is the same procedure as 107a49c0, but applied to all the new code since then.
* lib: Remove move-on-return for chdr_packet_writerMartin Braun2021-03-111-1/+1
| | | | This is a pessimizing move, and clang warns about it.
* lib: Fix unresolved cleanup conflict (sorry!)Aaron Rossetto2021-03-041-5/+1
|
* lib: Add some virtual dtorsMartin Braun2021-03-046-1/+19
| | | | | | | Classes where we call delete (implicitly or explicitly) with a virtual inheritance structure need to declare dtors as virtual. This reduces compiler warnings with clang. There are no known bugs (yet) due to this.
* rfnoc: tx_streamer: Remove EOV size attributeMartin Braun2021-03-041-2/+0
| | | | It is unused, and causes clang warnings.
* host: Update code base using clang-tidyMartin Braun2021-03-0426-283/+293
| | | | | | | | | The checks from the new clang-tidy file are applied to the source tree using: $ find . -name "*.cpp" | sort -u | xargs \ --max-procs 8 --max-args 1 clang-tidy --format-style=file \ --fix -p /path/to/compile_commands.json
* TwinRX: Fix LO lock failuremichael-west2021-02-101-11/+2
| | | | | | | Always write register 6 in the ADF5356. Conditional write was causing the LO not to lock at some frequencies. Signed-off-by: michael-west <michael.west@ettus.com>
* ADF535x: Change freq_resolution to mod2michael-west2021-02-041-22/+24
| | | | | | | | | The freq_resolution parameter to the set_frequency() method was confusing. Changing it to the mod2 value clarifies the intention and makes the math to reduce the FRAC2 and MOD2 values much easier to read and maintain. Signed-off-by: michael-west <michael.west@ettus.com>
* TwinRX: Spur cleanupmichael-west2021-02-041-1/+16
| | | | | | | | | | - Reduce FRAC2 and MOD2 values on ADF5356 - Add write to register 10 and delay during retune on ADF5356 - Make negative bleed conditional on integer or fractional N mode for ADF5356 - Tune unused LOs out of band to remove interference Signed-off-by: michael-west <michael.west@ettus.com>
* lib: Fix missing includes in rpc.hppMartin Braun2021-02-011-0/+4
|
* uhd: lambda capture the node instead of vert descSteven Koo2021-01-211-0/+3
| | | | | | | | | | | This commit adds another resolve_all_properties method to use the node instead of the vertex descriptor. The vertex descriptor could be removed. This could cause the lambda capture to have an outdated vertex descriptor, which would result in a hang when looking for it. This resolves the issue by capturing the node and looking for the vertex descriptor. Signed-off-by: Steven Koo <steven.koo@ni.com>
* uhd: Check for overflow after timeout buff readSteven Koo2021-01-212-18/+15
| | | | | | | | | | | | Error processing has been moved to another thread, so it's possible that consecutive recv calls may miss the signalling that an overflow occurred. We have no guarantee that the flag had been set by the time the second recv call to find the errors occurs. This adds another check for an overflow after calling _get_aligned_buffs with a min 1ms timeout. Hopefully this is long enough for the error to propogate, but it's not guaranteed. Signed-off-by: Steven Koo <steven.koo@ni.com>
* uhd: Split radio_control into rf_control interfacesLane Kolbly2021-01-113-0/+132
| | | | | | These rf_control interfaces allow easier implementation of radio controls as well as allowing easier sharing of code for implementing e.g. gain_profile.
* Create C++ wrappers for MPM RPC callsLane Kolbly2021-01-113-5/+169
| | | | | | | | | This gives us type-safety, as well as allowing us to create unit tests for RFNoC radio_controls without having to create actual RPC servers and clients in the unit tests. This change also fixes a bug in mpmd_mb_controller::set_sync_source, where it was calling the wrong MPM function.
* fixup! RFNoC: Handle receive of 0 samplesmichael-west2020-12-211-3/+3
|
* RFNoC: Handle receive of 0 samplesmichael-west2020-12-101-0/+5
| | | | | | | Returns immediately if requested number of samples is zero. Prevents timeout error from being thrown if user requests no samples. Signed-off-by: michael-west <michael.west@ettus.com>
* graph: Restore default resolver callback at node removalAaron Rossetto2020-11-201-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default resolve callback behavior for a newly-instantiated `node_t` object resolves all dirty properties associated with the node, then marks the properties as clean. When the node is added to a graph, its resolver callback is updated to use the graph property propagation algorithm in `graph_t::resolve_all_properties()`, which is considerably more sophisticated and relies on the graph topology to do its work. When a connection between two nodes is broken via the `graph::disconnect()` method, nodes which no longer have incoming or outgoing edges (connections) are removed from the graph. Prior to this change, the removed node's resolver callback was left pointing at the graph property propagation algorithm. In certain use cases, this could result in unexpected client-facing behavior. Consider, for example, this code (incomplete and for illustrative purposes only) which creates a streamer on one transmit chain of a multi-channel device, destroys that streamer, then creates a stream on the other transmit chain. Attempting to set the TX rate on the first chain after destroying the streamer does not result in the expected rate change, despite the same code working correctly before creating the streamer: constexpr size_t CH0 = ..., CH1 = ...; uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(...); // Set a TX rate on both chains; this succeeds usrp->set_tx_rate(initial_rate, CH0); usrp->set_tx_rate(initial_rate, CH1); assert(initial_rate == usrp->get_tx_rate(CH0)); assert(initial_rate == usrp->get_tx_rate(CH1)); // Create a TX streamer for channel 0 std::vector<size_t> chain0_chans{CH0}; stream_args_t sa; sa.channels = chain0_chans; sa.otw_format = ...; sa.cpu_format = ...; uhd::tx_streamer::sptr txs = usrp->get_tx_stream(sa); // Destroy the first streamer (disconnecting the graph) and // create a streamer for channel 1 txs.reset(); std::vector<size_t> chain1_chans{CH1}; sa.channels = chain1_chans; txs = usrp->get_tx_stream(sa); // Now try to set a new TX rate on both chains usrp->set_tx_rate(updated_rate, CH0); usrp->set_tx_rate(updated_rate, CH1); assert(updated_rate == usrp->get_tx_rate(CH0)); // <--- FAILS assert(updated_rate == usrp->get_tx_rate(CH1)); The reason this fails is because the second call to `set_tx_rate()` on channel 0 internally sets the 'interp' (interpolation ratio) property on the DUC node via the call to the DUC block controller's `set_input_rate()` function. As the DUC node is no longer part of the graph, having been removed from it when the first streamer instance was destroyed, the graph property propagation algorithm doesn't 'see' the node with the dirty property, and the 'interp' property resolver callback is never invoked. As a result, the DUC's input rate property, which depends on the interpolation ratio value, is never updated, and thus calling the `get_tx_rate()` function to query the new rate of the TX chain results in an unexpected value. In fact, in this particular case, `set_tx_rate()` actually raises a warning that the TX rate couldn't be set, and a message is printed to the console. This commit remedies the situation by restoring the default resolve callback behavior for a node when it is removed from the graph. This allows the framework to be able to invoke the property resolver callback on that node when a property is updated, the expected behavior of a newly instantiated node.
* graph: Serialize all graph-related functionsAaron Rossetto2020-10-221-2/+2
| | | | | | | | This commit expands the scope of the former _release_mutex, renaming it _graph_mutex and ensuring that all graph modification functions are serialized against each other. This ensures that callers to graph_t's public functions are always operating on a coherent view of the underlying BGL graph object.
* twinrx: Bypass adf535x feedback dividermattprost2020-09-031-7/+13
| | | | | | | | Bypass the LO1 feedback divider if it is not required. Some TwinRX units have seen issues when tuning to frequencies between 3.5GHz and 5.1GHz while following that data path. Signed-off-by: mattprost <matt.prost@ni.com>
* dpdk: Improve link status detectionAaron Rossetto2020-09-031-0/+1
| | | | | | | | | | | | | | | | This change improves the DPDK link status detection algorithm in the following ways: - The status of the links are checked at an interval of 250 ms. If all links report as being up, the driver proceeds. - If any of the DPDK links has not reported as being up by the end of the link status detection timeout (1000 ms by default), the algorithm throws a runtime error rather than proceeds with one or more down links. - Users may override the default link status detection timeout by passing dpdk_link_timeout=N, where N is the desired timeout in milliseconds, either via device arguments or in the UHD configuration file.
* uhd: Add APIs for getting the available power rangeMartin Braun2020-08-171-0/+2
| | | | | | | | | The previously added APIs for getting/setting power reference levels was missing an option to read back the currently available power levels (minimum and maximum power levels). This adds getters for TX and RX power ranges to multi_usrp and radio_control. The power API is thus now more similar to the gain API, which always had getters for gain ranges.
* twinrx: update synthesizer register values for improved rf performancemattprost2020-08-111-11/+28
| | | | | | | | | | | | | Updated Register values for ADF5356: R2) Expand Frac2 to a 28-bit value for ADF5356 R6) Use negative bleed current for improved spurious performance R7) Set Fractional-N Lock Detect Precision to 12.0 ns because of bleed currents R8) Use magic number for reserved bits R9) Fix VCO Band Division calculation for ADF5356 RD) Expand Frac2 to a 28-bit value for ADF5356 Signed-off-by: mattprost <matt.prost@ni.com>
* X300: fix for incorrect PCIe buffer size valuesMatthew Crymble2020-08-041-3/+5
| | | | added extra args to get PCIe buffer sizes from factory method
* RFNoC: Added support for destruction of streamersmichael-west2020-08-042-2/+28
| | | | | | | | | | | - Added rfnoc_graph method to disconnect a connection. - Added rfnoc_graph method to disconnect a streamer. - Added rfnoc_graph method to disconnect a port on a streamer. - Added disconnect callback to rfnoc_rx_streamer and rfnoc_tx_streamer. - Registered disconnect callback functions to streamers returned by get_rx_streamer and get_tx_streamer methods. Signed-off-by: michael-west <michael.west@ettus.com>
* RFNoC: Add disconnect methods to graphmichael-west2020-08-041-5/+24
| | | | | | | | | | - Added method to disconnect an edge - Added method to remove a node - Fixed algorithm to check edges during connect. Previous code was checking some edges twice and allowing duplicate edges to be created for existing edges. Signed-off-by: michael-west <michael.west@ettus.com>
* RFNoC: Add xport disconnect callbacksmichael-west2020-08-044-15/+46
| | | | | | | | | | | | Transports were not disconnecting their links from the I/O service upon destruction, leaving behind inaccessible send and recv links used by nothing. This led to I/O errors after creating several transports. Added callbacks to transports to automatically disconnect their links from the I/O service when the transport is destroyed. Updated all callers to supply a disconnect callback. Signed-off-by: michael-west <michael.west@ettus.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-06 15:24:30 +0000