aboutsummaryrefslogtreecommitdiffstats
path: root/host/include
Commit message (Collapse)AuthorAgeFilesLines
* fixup! multi_usrp: Expose APIs for TX LO controlsMartin Braun2018-07-311-0/+1
| | | | | | This is a fixup of a pretty old commit, but necessary. It adds a UHD_USRP_MULTI_USRP_TX_LO_CONFIG_API macro for detection of TX LO controls, which should have been in the original commit.
* X300: Change Ethernet bufferingMichael West2018-07-253-6/+16
| | | | | | | Ethernet buffering is now done so that most of the buffering is done in the socket buffers and multiple frames are only used to support the receive side offload of the socket I/O. Eliminates dropped packets at high full duplex rates.
* Device3: Change packet-based flow control to byte-based flow controlMartin Braun2018-07-256-20/+28
|
* rfnoc: Enabled SW flush mechanism impl'd in noc_shellAshish Chaudhari2018-07-242-1/+4
| | | | | | | | | | | - UHD will now "disconnect" the noc_block data-path from the crossbar when the block's dtor is invoked. This allows long running or slow blocks to empty out rapidly during teardown. - UHD will also attempt to flush at init time in case a block is destroyed abnormally. The goal of the flush mechanism is to not lock up the FPGA - noc_shell compat number is now 3
* docs: Add comments on block port and ID for stream argsMartin Braun2018-07-201-1/+12
|
* uhd: initial commit of UHD support for E320Brent Stapleton2018-07-181-0/+53
| | | | Co-authored-by: Sugandha Gupta <sugandha.gupta@ettus.com>
* cmake: Fix version numberingMartin Braun2018-07-131-4/+4
| | | | | UHD-* branches were being detected as "development", and #cmakedefine does not like it when values are actually zero.
* uhd: Expose DC Offset range via multi_usrp interfaceDerek Kozel2018-07-111-0/+12
|
* soft_register: Remove compiler warning, add unit testMartin Braun2018-07-111-4/+6
|
* e300: merge files from rfnoc-develTrung N Tran2018-06-291-0/+60
| | | | This disables the ability to do "network mode" on the E310.
* rfnoc: Merge block controller header files from rfnoc-develTrung Tran2018-06-293-44/+123
|
* fixup! Time_spec: Add OperatorsVidush2018-06-261-2/+2
|
* docs: Fixed a doxygen warningMartin Braun2018-06-222-1/+2
|
* UHD: Reorder includeMartin Braun2018-06-221-1/+1
|
* multi_usrp: Forward-declare device3Martin Braun2018-06-221-3/+5
| | | | | There is no need to include it in multi_usrp.hpp, and in fact, it will break stuff when ENABLE_RFNOC=OFF, which is currently the default.
* RFNoC: Add FIR, Null, and Window block controllersMartin Braun2018-06-223-0/+170
|
* RFNoC: Add Siggen block controllerSugandha Gupta2018-06-221-0/+25
|
* UHD: Expose device3 APIs in multi_usrpMartin Braun2018-06-221-0/+15
|
* RFNoC: Add moving avg, splitstream, and vector IIR block definitionsMartin Braun2018-06-223-0/+172
|
* RFNoC: Add debug, gain, schmidlcox, and serialdemod block definitionsJonathon Pendlum2018-06-224-0/+298
|
* Time_spec: Add OperatorsVidush2018-06-071-1/+3
|
* types: convert sensor_value_t to a mapBrent Stapleton2018-05-141-0/+3
|
* docs: Clarify meaning of DSP frequenciesMartin Braun2018-05-111-0/+11
|
* dboard_iface: Add has_set_fe_connection() methodMartin Braun2018-05-081-0/+4
|
* lib: Purge use of boost::assign, except for uhd::dictMartin Braun2018-05-021-5/+2
| | | | | | | Replaced with initialization lists. Note: uhd::dict does not work with initializer lists without making changes to said data structure. This commit has no functional changes, so keeping the boost::assigns for uhd::dict.
* lib: Purge all references to boost::this_thread::sleep()Martin Braun2018-04-302-4/+5
| | | | Replace with std::this_thread::sleep_for().
* log: Allow disabling of fastpath msgs at runtimeMartin Braun2018-04-261-1/+1
| | | | | | - Fixes an issue with compile time disabling as well - An UHD_LOG_FASTPATH_DISABLE=1 env var will make it that O/U/S/D won't be printed
* niusrprio: Move a const from header to implMartin Braun2018-04-181-2/+0
| | | | This avoids having to redeclare the static const to avoid linker errors.
* niusrprio: Refactor niusrprio_session, move out static constsMartin Braun2018-04-171-4/+0
| | | | | | Static const attributes were causing linker issues the way there were being used, but they were only used in niusrprio_session.cpp and thus could be factored out.
* fixup! lib: adding == and != for uhd::dictMartin Braun2018-04-051-1/+1
| | | | | The original code was fine, but it required the caller to be using C++11.
* multi_usrp: Add API call to query the clock rate rangeMartin Braun2018-04-031-0/+20
|
* lib: adding == and != for uhd::dictBrent Stapleton2018-04-022-0/+32
|
* lib: adding device_addr_t constructor from mapBrent Stapleton2018-04-021-0/+7
| | | | | Adding constructor for device_addr_t that takes a map<string, string> as an argument.
* lib: Fixing config file path for some Windows buildsAndrew Lynch2018-03-281-0/+4
|
* DDC/DUC: switch CORDIC -> DDS for all relevant variable namesRyan Marlow2018-03-224-6/+6
| | | | - Bump compat number for DDC/DUC to 2.0
* rfnoc: ctrl_iface cleanupMartin Braun2018-03-162-6/+13
| | | | | | | | | | - ctrl_iface is now longer a wb_iface. All it can do now is send command packets, and receive responses to those. - ctrl_iface does not store command time or tick rate - wb_iface_adapter is no longer a set of functors, but a wrapper around ctrl_iface. Command times are stored once, in the block. - DMA FIFO and radio block controllers have an easier time getting access to a timed_wb_iface
* rfnoc: modify duc.xml and radio_x300.xml;add duc_single.xmlTrung N Tran2018-03-133-11/+151
|
* mg: reduce to 2 radios for n310Trung N Tran2018-03-131-1/+9
|
* uhd: Moved get_system_time outside of public APIMartin Braun2018-03-051-8/+0
| | | | | | | uhd::get_system_time() is an abstracted way of reading back a time, and is not UHD-specific. As such, there's no reason to keep it in the public part of the API where we're contractually obligated not to touch it. Instead, moving it to the internal API space.
* uhd: Removed atomic.hpp from public APIMartin Braun2018-03-052-74/+0
| | | | | | | atomic.hpp defines a spin lock and a lockfree mutex. There is no reason to have standard constructs in the public API, where we're contractually obligated to not touch them. Thus, moving them into the internal API space.
* uhd: Move some gpio_defs constants definitions out of headersMartin Braun2018-02-271-109/+0
| | | | Reviewed-by: Trung Tran <trung.tran@ettus.com>
* usrp: Add set_gpio_attr overload that use stringTrung N Tran2018-02-212-39/+164
| | | | | | | | | | | | | 1/ multi_usrp.hpp; multi_usrp.cpp: added new functions - set_gpio_attr() that allow user to set certain attribute by string value. - get_gpio_string_attr() return string type value of certain attribute. 2/ gpio_defs.hpp; gpio_atr_3000.cpp : added new definition of SRC attribute. This commit enable user to use multi_usrp api to set_gpio_attr using string value. This is helpful; because the attribute can represent more than two state as of old API. This enable user to set SRC (source) that drive each GPIO bank's pin. Source can be either processing unit(PS) or radio frontend logic from FPGA logic.
* rfnoc,x300: Multiple clocking changesAshish Chaudhari2018-02-211-1/+1
| | | | | | - Moved bus_clk <=> ce_clk crossing to axi_wrapper in FPGA which resulted in a noc_shell compat bump - Change x300 bus_clk frequency to 187.5 MHz
* uhd: Update license headersMartin Braun2018-02-19159-149/+301
| | | | | | | All copyright is now attributed to "Ettus Research, a National Instruments company". SPDX headers were also updated to latest version 3.0.
* rfnoc: Check noc_shell compat number at runtimeMartin Braun2018-02-192-2/+10
|
* rfnoc: Add TX bandwidth APIs to radio_ctrlMartin Braun2018-02-081-0/+17
|
* usrp: add multiusrp api for gain profile.Trung N Tran2018-01-121-0/+56
|
* uhd: Add narrow_cast and narrowMartin Braun2018-01-121-0/+7
| | | | Reviewed-by: Ashish Chaudhari <ashish.chaudhari@ettus.com>
* rfnoc: Added a 4-port DMA FIFO block XML defAshish Chaudhari2018-01-082-1/+110
|
* types: Change eeprom_map_to to uint8_t vectorsMartin Braun2017-12-221-2/+2
| | | | | | | mpmd_impl was already using this type, fixed conversion from std::string to std::vector<uint8_t> there too. Reviewed-By: Brent Stapleton <brent.stapleton@ettus.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 19:49:18 +0000