aboutsummaryrefslogtreecommitdiffstats
path: root/host/examples
Commit message (Expand)AuthorAgeFilesLines
...
* uhd: fixed some compile warnings for msvcJosh Blum2012-02-281-2/+2
* uhd: add over-the-wire option to tx waveformsJosh Blum2012-02-121-2/+3
* uhd: various tweaks for compiler warns and valgrindJosh Blum2012-02-091-1/+2
* dsp rework: added otw mode for benchmark appJosh Blum2012-02-031-6/+9
* uhd: patch to support PKG_LIB_DIR per debian fs standardsJosh Blum2012-01-131-2/+2
* uhd: typo fix in tx waveforms optionsJosh Blum2012-01-031-1/+1
* usrp2: added bind option to the relayJosh Blum2011-12-201-7/+9
* usrp2: more work on relay app and sequence error detectionJosh Blum2011-12-201-14/+45
* usrp2: created network relay example appJosh Blum2011-12-202-0/+195
* uhd: added wireformat to samples to fileJosh Blum2011-12-091-5/+7
* rx_samples_to_file is not streaming the correct nsampsJason Abele2011-11-281-15/+24
* uhd: simplification for tx waveformsJosh Blum2011-11-111-5/+3
* uhd: updated ref sensor checks for new option namesJosh Blum2011-11-105-10/+10
* uhd: performance improvement for tx waveforms using integer table lookupJosh Blum2011-11-101-8/+7
* uhd: modify examples to use new time/clock source APIJosh Blum2011-11-076-69/+13
* uhd: performance speed up for tx waveforms, no iterative libmath per sampleJosh Blum2011-11-061-2/+3
* uhd: fixed 8sc item32 converter on head/tail casesJosh Blum2011-11-031-1/+1
* uhd: renamed some of the stream types and functionsJosh Blum2011-11-0312-28/+28
* uhd: updated examples to use new streamer interfaceJosh Blum2011-11-0312-127/+128
* uhd: specify range on tx_waveforms --amplJosh Blum2011-10-101-1/+1
* uhd: help messages for user on rx samples to fileJosh Blum2011-10-082-2/+16
* Updates to example appsJason Abele2011-09-215-7/+198
* uhd: add mimo cable config option to rx_multi_samplesJosh Blum2011-09-061-2/+18
* uhd: tweak for tx_timed_samples to pad async msg timeoutJosh Blum2011-08-301-2/+2
* uhd: benchmark example will print help if no rate specifiedJosh Blum2011-07-081-1/+1
* uhd: added inline message testing to the messages exampleJosh Blum2011-07-032-15/+127
* usrp: created common code to demux an rx stream (b100, e100)Josh Blum2011-07-011-1/+1
* uhd: on e100, this benchmark control thread should also have prio so it can s...Josh Blum2011-06-171-0/+1
* e100: implemented spi, i2c, messages w/ peek/pokeJosh Blum2011-06-171-16/+20
* uhd: more benchmark tweaks, removed old benchmark rxJosh Blum2011-06-153-175/+9
* uhd: added dropped samples calculation to rx testJosh Blum2011-06-151-1/+13
* uhd: created benchmark rate appJosh Blum2011-06-152-0/+223
* uhd: many tweaks for tx_waveforms including performanceJosh Blum2011-06-071-59/+64
* uhd: just send a mini EOB packet for tx timed samplesaJosh Blum2011-06-031-3/+7
* tx_bursts: minor changeNick Foster2011-05-271-1/+1
* tx_bursts: optional repeatNick Foster2011-05-271-3/+5
* minor change to tx_burstsNick Foster2011-05-261-1/+1
* add gain to tx burst appNick Foster2011-05-261-0/+6
* added tx_bursts MIMO burst transmit testNick Foster2011-05-262-0/+155
* tx_waveforms: don't have to set time_spec for every pkt in the streamNick Foster2011-05-261-2/+2
* tx_timed_samples: fix so EOB isn't set on every pktNick Foster2011-05-261-1/+1
* tx_waveform: no SOB for continuous streamingNick Foster2011-05-261-3/+1
* UHD: make tx_waveforms MIMO-capableNick Foster2011-05-261-27/+47
* usrp2: turn on ups_per_sec to avoid timeout issues on low sample ratesJosh Blum2011-05-201-3/+0
* usrp-e100: add ability to set/get default master clock rate from EEPROMJosh Blum2011-05-011-8/+1
* uhd: make benchmark example take a rate, and give special warning for usrp1Josh Blum2011-04-291-17/+22
* uhd: added more hw params to rx_ascii_art_dftJosh Blum2011-04-251-12/+41
* uhd: setup cpack components for component based installersJosh Blum2011-03-211-2/+2
* uhd: added missing set_tx_antenna() in tx waveformsJosh Blum2011-03-151-0/+3
* uhd: created rx_multi_samples for multi-channel exampleJosh Blum2011-03-114-14/+161