aboutsummaryrefslogtreecommitdiffstats
path: root/host/docs
Commit message (Collapse)AuthorAgeFilesLines
* docs: n3xx/x3xx: Fix links to DPDK pagesteviez2020-02-272-2/+2
| | | | | | | The n3xx and x3xx device pages both link to the DPDK page. However, the link was setup as type "subpage" instead of "ref". The result was that both device pages thought they owned the DPDK page which caused non-intuitive behavior when clicking through links in the manual
* cmake/doxygen: Fix FPGA manual post-FPGA-mergeMartin Braun2020-02-062-24/+7
| | | | | | | While merging the FPGA code into the UHD codebase, the manual building process was not modified, resulting in either a link to the website instead of building the FPGA manual as part of the rest, or by using a residual submodule.
* docs: e3xx/n3xx: Add sections on FP-GPIOs and how to drive themMartin Braun2020-01-232-0/+109
| | | | This gives examples of how to use the set_gpio_src() API and friends.
* fixup! docs: e320: Add documentation for gpio and eeprom-flagsJoerg Hofrichter2020-01-221-2/+2
|
* docs: n3xx: document eeprom flagsJoerg Hofrichter2020-01-221-0/+34
| | | | | | | | Add a subsection to both N310- and N320 specific features to document the EEPROM flags simliar to as it is done in the E320 documentation. Signed-off-by: Joerg Hofrichter <joerg.hofrichter@ni.com>
* docs: fixing typos in gpio API example in manualsteviez2020-01-101-10/+7
|
* tools: R&D testing prodecure updated for E3xxSugandha Gupta2020-01-101-25/+42
| | | | | | -Adds embedded mode tests for E310 and E320 to the R&D testing procedure. -Modifies increased rates for 1Gige testing on E320
* dpdk: Add new DPDK stack to integrate with I/O servicesAlex Williams2019-12-201-9/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | docs: Update DPDK docs with new parameters: Parameter names have had their hyphens changed to underscores, and the I/O CPU argument is now named after the lcores and reflects the naming used by DPDK. transport: Add new udp_dpdk_link, based atop the new APIs: This link is tightly coupled with the DPDK I/O service. The link class carries all the address information to communicate with the other host, and it can send packets directly through the DPDK NIC ports. However, for receiving packets, the I/O service must pull the packets from the DMA queue and attach them to the appropriate link object. The link object merely formats the frame_buff object underneath, which is embedded in the rte_mbuf container. For get_recv_buff, the link will pull buffers only from its internal queue (the one filled by the I/O service). transport: Add DPDK-specific I/O service: The I/O service is split into two parts, the user threads and the I/O worker threads. The user threads submit requests through various appropriate queues, and the I/O threads perform all the I/O on their behalf. This includes routing UDP packets to the correct receiver and getting the MAC address of a destination (by performing the ARP request and handling the ARP replies). The DPDK context stores I/O services. The context spawns all I/O services on init(), and I/O services can be fetched from the dpdk_ctx object by using a port ID. I/O service clients: The clients have two lockless ring buffers. One is to get a buffer from the I/O service; the other is to release a buffer back to the I/O service. Threads sleeping on buffer I/O are kept in a separate list from the service queue and are processed in the course of doing RX or TX. The list nodes are embedded in the dpdk_io_if, and the head of the list is on the dpdk_io_service. The I/O service will transfer the embedded wait_req to the list if it cannot acquire the mutex to complete the condition for waking. Co-authored-by: Martin Braun <martin.braun@ettus.com> Co-authored-by: Ciro Nishiguchi <ciro.nishiguchi@ni.com> Co-authored-by: Brent Stapleton <brent.stapleton@ettus.com>
* X310: update UBX/SBX gain settings for phase alignment testingerickshepherdNI2019-12-131-3/+3
| | | | | Update UBX and SBX gain settings in the manual for phase alignment testing.
* docs: Add note about DPDK needing to be built as shared librariesAaron Rossetto2019-12-131-1/+10
|
* docs: fixing doxygen errors reported during makesteviez2019-12-031-9/+9
|
* docs: Change DPDK version to 18.11 and make args use underscoresAlex Williams2019-11-261-27/+27
| | | | | Swap out hyphens for underscores in the DPDK args. Also update list of distributions with the correct DPDK version in the repos.
* Remove proto-RFNoC filesMartin Braun2019-11-264-27/+1
| | | | | | | This commit removes all files and parts of files that are used by proto-RFNoC only. uhd: Fix include CMakeLists.txt, add missing files
* utils: Add RFNoC-specific features to uhd_usrp_probeMartin Braun2019-11-261-0/+6
| | | | | | - --interactive-reg-shell $BLOCKID will let you peek and poke registers in an RFNoC block - Blocks and static connections are printed
* x300/mpmd: Port all RFNoC devices to the new RFNoC frameworkMartin Braun2019-11-261-2/+0
| | | | | | | Co-Authored-By: Alex Williams <alex.williams@ni.com> Co-Authored-By: Sugandha Gupta <sugandha.gupta@ettus.com> Co-Authored-By: Brent Stapleton <brent.stapleton@ettus.com> Co-Authored-By: Ciro Nishiguchi <ciro.nishiguchi@ni.com>
* uhd: Remove support for N230Martin Braun2019-11-261-1/+1
| | | | Note: N230 is still supported on the 3.15 LTS branch
* cmake: Bump dependency versions for UHD 4.0.0.0Martin Braun2019-11-262-9/+2
| | | | | | | | | | | | - Boost >= 1.58 - CMake >= 3.5.1 - gcc >= 5.4.0 - Clang >= 3.8, AppleClang >= 600 - Python >= 3.5 (Py2k no longer supported) - Numpy >= 1.11 - C++14 for lib, include may now use C++11 constructs. - Because there is no more code requiring C++03 syntax, we remove the include-specific clang-format file
* docs: clarifying which devices support DPDKsteviez2019-11-221-3/+6
|
* docs: fixed links where original URL was not accessible anymoreJoerg Hofrichter2019-11-222-2/+2
| | | | Signed-off-by: Joerg Hofrichter <joerg.hofrichter@ni.com>
* docs: added N320/N321 to FPGAmattprost2019-11-071-11/+14
| | | | | Added appropriate references to N321 in the R&D testing doc for the FPGA Functional Verification section.
* docs: Add info on FPGA flavours for E320 and N3xxMartin Braun2019-11-072-1/+50
| | | | This explains what the various FPGA flavours (XG, HG, 1G) are.
* Docs: Adjust FPGA functional verification testsmichael-west2019-10-151-21/+21
| | | | | | | - Reduce long tests from 3600 seconds to 600 seconds. - Remove 2xRX@153.6e6 test for N310 10 GbE (not practical). Signed-off-by: michael-west <michael.west@ettus.com>
* Docs: Fix MPM cmake command for E320michael-west2019-10-151-1/+1
| | | | | | | Add -DMPM_DEVICE=e320 to the command so the E320 version is built and not the N3xx version. Signed-off-by: michael-west <michael.west@ettus.com>
* docs: Fix wrong anchor for PCIe transport paramsMartin Braun2019-10-151-1/+1
|
* docs: Fix more Doxygen warnings due to spurious backslashesMartin Braun2019-10-151-5/+5
|
* docs: Improve man page compression code in CMakeMartin Braun2019-10-141-24/+11
| | | | | | | | | The existing code would fail on the second CMake run when gzip wasn't actually installed, as well as on the first build. The behaviour is modified as follows: - ENABLE_MAN_PAGE_COMPRESSION is made a variable, instead of an option - Its default value is derived from ${GZIP_FOUND}
* N3xx: Remove close-in noise on TXMichael West2019-10-111-0/+3
| | | | | | | | | | | Some close-in noise was observed on TX when using external references. This change reduces the noise by changing U19 to select the GPSDO when references are set to external. Also included is a change to properly read and apply settings from the configuration file. This allows the user to further quiet the transmission by adding 'enable_gps=False' to the configuration file in order to power off the GPSDO. Signed-off-by: Michael West <michael.west@ettus.com>
* n3xx: Disable gpsdo reference source when enable_gps=0Martin Braun2019-10-111-1/+8
| | | | | | | | | | | | | | | When using enable_gps=0, the power to the LTE-Lite GPS chip is turned off, and neither the reference sources (time/clock) nor the location/time data (via gpsd) can be used. This commit disables the gpsdo options for the set_time_source, set_clock_source, and set_sync_source when enable_gps=0 is used, and adds logging to inform the user about this. This behaviour is consistent with X310, where `gpsdo` is only a valid reference if the GPSDO module is plugged in. The manual was also updated accordingly.
* docs: twinrx: Reduce res of TwinRX Block diagram and remove artefactsMartin Braun2019-10-101-0/+0
|
* cmake: make manpage compression an optionMichael Dickens2019-10-091-23/+64
| | | | | | If gzip can't be found, compression is turned off, unless the user requested ENABLE_MAN_PAGE_COMPRESSION in which case an error is returned.
* docs: Add a section on the PCIe NI-RIO transportMartin Braun2019-08-221-0/+25
|
* docs: Improve language on threading for recv() and send()Martin Braun2019-08-221-6/+12
|
* docs: Fix Doxygen warning due to spurious <>Martin Braun2019-08-131-1/+1
|
* docs: Fix Doxygen warnings due to spurious backslashesMartin Braun2019-08-131-1/+1
|
* docs: x300: update docs for multiple timed commandsSame-Writer2019-08-071-0/+5
| | | | | Adding advisory in the X300 manual page regarding issuing multiple timed commands causing device lockups.
* docs: e320/n3xx: Add a section on the BISTMartin Braun2019-07-102-0/+55
|
* docs: ubx: Add documentation for temp_comp_modeMartin Braun2019-06-121-0/+12
|
* cmake: Remove ENABLE_PYTHON3 flag and simplify Python detectionMartin Braun2019-05-242-8/+6
| | | | | | - Makes use of more modern find_package(Python2/3) if available - Moves almost all Python-related code to UHDPython.cmake - ENABLE_PYTHON3 is no longer necessary
* docs: e320: Add documentation for gpio and eeprom-flagsSugandha Gupta2019-05-172-0/+48
|
* docs: n3xx: Add link to README for building custom filesystemsSugandha Gupta2019-05-171-37/+1
|
* docs: e31x: e320: Update docs for E310 MPM versionSugandha Gupta2019-05-176-1080/+649
| | | | - Also updated device args and subdev spec
* docs: Auto-generate build page with min deps versionsMartin Braun2019-04-242-6/+11
| | | | | | The build guide manual page now takes the min versions for the dependencies straight from CMake. This avoids having to update the manual whenever we bump depdendencies.
* cmake: Bump dependency min versionsMartin Braun2019-04-241-5/+4
| | | | | | | | | | - gcc >= 4.8 (same as before) - Clang >= 3.8 - CMake >= 3.5.1 - Boost >= 1.58 Note: This also removes version-specific hacks for older CMake versions. Now that we require 3.5.1 they are no longer necessary.
* docs: Improved Windows-related build instructionsAbdo-Gaber2019-04-221-13/+65
| | | | | | | | | | | - In general, some comments to clarify the dependencies installation and building process for windows users. - Add a comment to the required packages for MSCV. - Provide instructions to install Python requirements. - Add the instructions of NSIS installation. - Add comments to the version match between different installers. - Clarify the instructions of building process using Cmake - Add a subsection to show how a binary UHD installer can be obtained. - Correct the URL of Doxygen.
* docs: Add mention of DPDK support to X3x0Alex Williams2019-04-102-1/+9
|
* docs: Fix various typosf380cedric2019-03-281-12/+12
| | | | | - Missing <br> - Missing spaces between units and values (e.g. 10MHz -> 10 MHz)
* docs: n320: Add note on LO input levelsMartin Braun2019-03-261-0/+3
| | | | FYI, the nominal LO input level on N320 is +5 dBm.
* docs: Fix typo for dpdk-num-mbufs and add config file locationAlex Williams2019-03-251-3/+7
|
* docs: Add comment on chmod+x for SDKs if necessaryMartin Braun2019-03-142-6/+19
| | | | | There are cases where downloading the SDK does not preserve the 'x' bits for the SDK .sh file. This explains how to circumvent that problem.
* uhd: mpm: update all license header w/ "-or-later"Brent Stapleton2019-03-081-1/+1
| | | | Updating all SPDX license identifiers to include "-or-later"
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-04 12:56:13 +0000