aboutsummaryrefslogtreecommitdiffstats
path: root/host/docs
Commit message (Collapse)AuthorAgeFilesLines
* docs: Fix page on GPIOMartin Braun2022-01-052-52/+21
| | | | | | | | | - Referred to E310 as E3x0, but that's wrong. E320 has a different GPIO bank naming scheme. - Fails to mention N3x0. This change makes the page mostly device-agnostic (X410 GPIO control is still elsewhere). - The first example had a typo (wrong pin was selected in ATR example). - The second example added nothing, and was removed for clarity.
* docs: Fix MathJax formulae renderingAaron Rossetto2021-12-161-1/+1
| | | | | | | | | | When a webpage is accessed via secure HTTP, and that webpage attempts to address active content via a non-secure URI, most modern browsers will block the loading of that content as a security precaution. In this case, the URI to the MathJax JavaScript rendering library was specified in the Doxygen configuration with an HTTP (i.e., non-encrypted) URI, thus preventing the browser from loading it and rendering formulae correctly.
* docs: Amend page on RFNoC propertiesMartin Braun2021-12-161-2/+12
| | | | Add an additional paragraph on back-edges, and when *not* to declare them.
* docs: remove bmaptool instructions for writing filesystemsMatthew Crymble2021-12-141-3/+3
| | | | | | Due to a change in Mender, bmaptool is no longer supported for writing filesystem images. Currently, the only recommended method for writing a filesystem to an SD card is to use dd. The filesystem can still be updated in place using mender.
* docs: Remove obsolete man pagesMartin Braun2021-12-083-112/+0
| | | | | | The man pages for usrp_x3xx_fpga_burner and octoclock_firmware_burner are obsolete; the corresponding utilities were replaced by uhd_image_loader many UHD versions ago.
* docs: Update DPDK documentationAndrew Lynch2021-12-061-13/+37
|
* docs: Improve documentation for properties and -propagationMartin Braun2021-12-034-1/+466
|
* docs: Several minor manual improvementsMartin Braun2021-11-166-10/+49
| | | | | | | - Remove documentation of skip_dram, skip_ddc, skip_duc, which are all obsolete since UHD 4 - Properly document serialize_init - Add a table of valid args for X310 as with other devices
* doc: x4xx: Document configuring eth0 static IPLane Kolbly2021-11-091-1/+28
|
* docs: x410: Document GPIO API and capabilitiesLane Kolbly2021-11-054-0/+251
|
* docs: Collect all RFNoC block controllers in a module in the manualMartin Braun2021-11-051-0/+12
| | | | | | This lets Doxygen create a page in the UHD manual that lists all RFNoC block controllers. It will be accessible under Manual -> Modules -> RFNoC -> RFNoC Blocks shipped with UHD.
* docs: Align dependencies and bump deb package versionsMartin Anderseck2021-11-022-4/+7
| | | | | | Aligning dependencies between KB entries and documentation for Ubuntu 20.04 and bumping version numbers in the installation documentation to latest available versions in Ubuntu and PPA.
* docs: Fix GPIO documentation exampleLane Kolbly2021-10-201-5/+5
|
* docs: x410: Fix info on loading SD card images with bmaptoolMartin Braun2021-09-281-1/+5
|
* docs: sync: Update page on synchronizationMartin Braun2021-09-161-19/+24
| | | | | - Clarify features that only work on B100 and N2x0 (_external_) - De-emphasize MIMO-cable sync
* cmake: Replace CMAKE_{SOURCE,BINARY}_DIR with UHD_*_DIRMartin Braun2021-09-102-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | See the CMake 3.8 documentation on these two variables: https://cmake.org/cmake/help/v3.8/variable/PROJECT-NAME_SOURCE_DIR.html https://cmake.org/cmake/help/v3.8/variable/CMAKE_SOURCE_DIR.html Under normal circumstances, these two are identical. For sub-projects (i.e., when building UHD as part of something else that is also a CMake project), only the former is useful. There is no discernible downside of using UHD_SOURCE_DIR over CMAKE_SOURCE_DIR. This was changed using sed: $ sed -i "s/CMAKE_SOURCE_DIR/UHD_SOURCE_DIR/g" \ `ag -l CMAKE_SOURCE_DIR **/{CMakeLists.txt,*.cmake}` $ sed -i "s/CMAKE_BINARY_DIR/UHD_BINARY_DIR/g" \ `ag -l CMAKE_BINARY_DIR **/{CMakeLists.txt,*.cmake}` At the same time, we also replace the CMake variable UHD_HOST_ROOT (used in MPM) with UHD_SOURCE_DIR. There's no reason to have two variables with the same meaning and different names, but more importantly, this means that UHD_SOURCE_DIR is defined even in those cases where MPM calls into CMake files from UHD without any additional patches. Shoutout to GitHub user marcobergamin for bringing this up.
* docs: Fix typo in ZBX Block DiagramSam O'Brien2021-07-141-2/+2
| | | | | | | | | | | | | | | | | | This commit changes the ZBX block diagram which is also visible at: https://files.ettus.com/manual/page_zbx.html The old version of this file had a typo where two paths in the RF section of the RX chain were both labeled "RF 3". The coresponding path in the TX chain was labeled "RF 4". Rather than change the RX label to "RF 4", this commit changes both labels to "RF 0", since that is how they are referred to in the tuning tables in the UHD source (see zbx_constants.hpp). This naming convention makes more sense anyways, because this path bypasses the filter bank in the RF section. Signed-off-by: Sam O'Brien <sam.obrien@ni.com>
* docs: usrp_x4xx: improve filesystem update instructionsHumberto Jimenez2021-07-131-4/+41
|
* docs: x4xx: Update information on CPLD updatingMartin Braun2021-07-092-0/+30
|
* docs: usrp_x4xx: add network leds behavior to docsHumberto Jimenez2021-06-231-8/+41
|
* docs: devices: remove child page relation to individual dboardsHumberto Jimenez2021-06-231-2/+2
|
* docs: zbx: link docs to rf specificationsHumberto Jimenez2021-06-231-4/+23
|
* docs: zbx: address review observations in docsHumberto Jimenez2021-06-221-2/+2
|
* docs: usrp_x4xx: address review observations in docsHumberto Jimenez2021-06-223-70/+157
|
* docs: Fix python3-ruamel.yaml name on RPM based OSf380cedric2021-06-221-2/+2
| | | | | | The package is named python3-ruamel-yaml on RHEL & derivatives. Signed-off-by: Aaron Rossetto <aaron.rossetto@ni.com>
* docs: zbx: update cpld source code locationHumberto Jimenez2021-06-181-1/+1
|
* docs: usrp_x4xx: apply minor corrections in docsHumberto Jimenez2021-06-181-41/+40
|
* docs: zbx: improve cpld update docsMichael Auchter2021-06-161-7/+5
|
* docs: usrp_x4xx: improve mb cpld update docsMichael Auchter2021-06-161-3/+2
|
* uhd: Add support for the USRP X410Lars Amsel2021-06-1010-0/+16891
| | | | | | | | | | | | | | | | Co-authored-by: Lars Amsel <lars.amsel@ni.com> Co-authored-by: Michael Auchter <michael.auchter@ni.com> Co-authored-by: Martin Braun <martin.braun@ettus.com> Co-authored-by: Paul Butler <paul.butler@ni.com> Co-authored-by: Cristina Fuentes <cristina.fuentes-curiel@ni.com> Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com> Co-authored-by: Virendra Kakade <virendra.kakade@ni.com> Co-authored-by: Lane Kolbly <lane.kolbly@ni.com> Co-authored-by: Max Köhler <max.koehler@ni.com> Co-authored-by: Andrew Lynch <andrew.lynch@ni.com> Co-authored-by: Grant Meyerhoff <grant.meyerhoff@ni.com> Co-authored-by: Ciro Nishiguchi <ciro.nishiguchi@ni.com> Co-authored-by: Thomas Vogel <thomas.vogel@ni.com>
* transport: Set mtu to 9000 for all 10GbE use casesmattprost2021-06-102-7/+7
| | | | | | | | An default MTU value of 9000 gives the devices the most flexibility using 10GbE. Many interfaces and docs have already been updated. This is bringing all devices into alignment with this paradigm. Signed-off-by: mattprost <matt.prost@ni.com>
* docs: Fix missing section header in power level controls pageMartin Braun2021-04-191-1/+1
|
* docs: Fix typo in mender sectionLane Kolbly2021-04-092-4/+4
|
* TwinRX: Remove frontend filtermichael-west2021-04-082-0/+14
| | | | | | | | | | Removing the FIR filter in the frontend to reclaim resources and remove redundancy when using a DDC block. The default image has a DDC block, so only users making custom RFNoC images and using TwinRX will need to take care to properly downconvert the full bandwidth coming from the radio block. Signed-off-by: michael-west <michael.west@ettus.com>
* fpga: docs: Improve documentation of rx_frontend_gen3Martin Braun2021-04-071-2/+2
| | | | Also fixes a typo in the calibration manual page.
* docs: Add N320 frontend correction sectionMartin Braun2021-03-192-1/+164
|
* docs: Use Mathjax for equation renderingMartin Braun2021-03-191-1/+1
|
* docs: Remove reference to Python sixMartin Braun2021-01-081-1/+0
| | | | | six is no longer in use within UHD, this is a stray reference in the build documentation.
* python: multi_usrp: Add get_mpm_client() API callMartin Braun2020-12-041-0/+22
| | | | | | | | | | | This is a new API call, only available on Python, and only available for MPM devices (it is added dynamically). It returns an object that allows calling RPC calls in a Pythonic manner. Example: >>> rpcc = usrp.get_mpm_client() >>> print(rpcc.get_device_info()) # Will print device info, as returned # by uhd_find_devices
* docs: mpm: correct ? notation to display helpJoerg Hofrichter2020-12-041-2/+2
| | | | | For displaying the docstring of a command, the ? character needs to be prepended to the command, not appended.
* Docs: Update Python3 dependenciesmichael-west2020-10-061-9/+12
| | | | Signed-off-by: michael-west <michael.west@ettus.com>
* docs: Fix sensor names for N3xx boardsMartin Braun2020-10-061-1/+2
|
* docs: Add new CHDR format to transportsWade Fife2020-09-111-9/+21
|
* docs: Updated register maps for UHD 4.0Wade Fife2020-09-112-35/+28
| | | | | | | | | Updates e3xx and n3xx register map documentation. - Add new RFNoC registers - Remove depreicated RFNoC registers - Add other missing registers - Correct formatting
* docs: New mender commands for Zeus filesystemsmattprost2020-09-092-6/+6
| | | | Signed-off-by: mattprost <matt.prost@ni.com>
* doc: add section about network mode on E3xx devicesRobertWalstab2020-09-091-0/+16
|
* docs: Add DPDK link detection sectionAaron Rossetto2020-09-031-1/+17
|
* docs: Add Windows-specific UHD Python module notesAaron Rossetto2020-09-031-0/+30
|
* docs: Add note about compiling on Ubuntu 20.04Aaron Rossetto2020-09-031-0/+31
|
* docs: Fix daughterboard page formattingMartin Braun2020-07-241-3/+3
|
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-01 08:34:31 +0000