| Commit message (Collapse) | Author | Age | Files | Lines | |
|---|---|---|---|---|---|
| * | usrp-e100: removed clockgen config stuff and docs | Josh Blum | 2011-06-06 | 1 | -15/+0 |
| | | |||||
| * | usrp-e100: created device address arg for master clock rate, removed eeprom hack | Josh Blum | 2011-05-12 | 1 | -9/+6 |
| | | |||||
| * | USRP1: added support for setting clock rate from EEPROM | Josh Blum | 2011-05-01 | 1 | -4/+4 |
| | | | | | | Basically, same deal as the previous changeset but for USRP1. Modified previous changes so that the key is shorter (mcr = master_clock_rate) | ||||
| * | usrp-e100: add ability to set/get default master clock rate from EEPROM | Josh Blum | 2011-05-01 | 1 | -5/+11 |
| | | | | | | | | | | Mboard eeprom map class can parse the setting (4 byte float). The clock control will try to set the eeprom rate if present, otherwise or under failure condition, it sets the default. Updated docs, example, and provided helpful verbose. I would prefer that users burn the desired rate to the eeprom (and they may too). | ||||
| * | Updated documentation and improved XCVR RSSI calculation | Jason Abele | 2011-04-14 | 1 | -0/+38 |
| | | | | | | | | | | | Documented dboard sensors Documented DBSRX2 Added description of direct conversion vs low IF for each dboard Added E1xx docs for adding refclock and pps connectors XCVR rssi calculation was in unscaled dB units Used chart in datasheet (pg 16) to rescale to dBm | ||||
| * | uhd: replace <prefix> with <install-path> in docs for clarity | Josh Blum | 2011-04-05 | 1 | -1/+1 |
| | | |||||
| * | usrp-e100: notes on unbricking/clock reovery | Josh Blum | 2011-02-08 | 1 | -0/+14 |
| | | |||||
| * | usrp-e100: added app notes for fpga loading and reclocking | Josh Blum | 2011-02-01 | 1 | -0/+51 |
 |
index : uhd | |
| Ettus' UHD Repository |
| summaryrefslogtreecommitdiffstats |