aboutsummaryrefslogtreecommitdiffstats
path: root/host/apps/omap_debug
Commit message (Collapse)AuthorAgeFilesLines
...
* got clock gen config working and testedJosh Blum2010-05-131-4/+6
|
* Connect enable to the correct gpio.Philip Balister2010-05-131-1/+1
|
* Change to 24 bit transfers.Philip Balister2010-05-131-2/+2
|
* Print a . for every packet received.Philip Balister2010-05-132-0/+5
|
* Add calculation for data trasnfer rates.Philip Balister2010-05-121-3/+43
|
* Add program to do initial configuration of the clkgen chip.Philip Balister2010-05-102-1/+298
|
* Update usrp_e.h file from kernel header.Philip Balister2010-05-071-5/+0
|
* First pass at data transfer program that uses CRC.Philip Balister2010-05-072-1/+200
|
* Print an error and exit if open fails for some programs.Philip Balister2010-05-073-0/+17
|
* Remove workaround for driver hang.root2010-05-053-6/+2
|
* Spi data returned in struct now.Philip Balister2010-05-031-1/+1
|
* Update path to put module in.Philip Balister2010-05-031-1/+1
|
* Add hack to work around driver race.Philip Balister2010-05-032-0/+4
|
* Add a hack to work around a driver race. Remove when teh driver is fixed.Philip Balister2010-05-031-0/+2
|
* Change overrun indication. New progress indicator. Turn on RT scheduler forPhilip Balister2010-05-021-2/+24
| | | | user space.
* Update IP address for my home desktop. Change module version to 2.6.33.Philip Balister2010-05-022-3/+3
|
* Add script to setup board id info in eeprom.Philip Balister2010-04-291-0/+17
|
* Various updates to test programs.Philip Balister2010-04-284-8/+93
|
* Add program to exercise interface using internal fpga data source and data sink.Philip Balister2010-04-272-1/+172
|
* Send only required number of bytes. Do it for longer.Philip Balister2010-04-271-2/+2
|
* Updates to test programs.Philip Balister2010-04-233-14/+181
|
* Update transfer test program to use usrp_transfer_frame struct.Philip Balister2010-04-222-17/+60
|
* Add program to setup debug pins.Philip Balister2010-04-203-1/+83
| | | | Add script to reload fpga and module.
* Initialize data array to help show when reads fail. Report return valuePhilip Balister2010-04-201-0/+5
| | | | from ioctl
* usrp-e-spi: change active edges around.Philip Balister2010-04-201-1/+1
|
* usrp-e-i2c always uses hex arguments.Philip Balister2010-04-201-6/+10
|
* Always put new bin file in /home/root.Philip Balister2010-04-201-2/+2
|
* Fix silly typo in script.Josh Blum2010-04-201-0/+1
|
* Fix script to write board id eeprom.Josh Blum2010-04-201-2/+2
|
* Add scripts to read and write board id info into usrp e id eepromPhilip Balister2010-04-202-0/+20
|
* pulled in master and got usrp-e code compilingJosh Blum2010-04-162-2/+2
|
* Fix typo.Philip Balister2010-04-131-0/+1
|
* Test program to verify GPIO on daughterboards. For success, connect gpios onPhilip Balister2010-04-093-7/+94
| | | | TX to corresponding ones on RX.
* Attempt to make scripts run inside and outside GHQ.Philip Balister2010-04-035-6/+22
| | | | | | | When at GHQ: export GHQ=1 export GHQ_USER="something that can log in to astro"
* Add program to read from serial port and print to screen. (works)Philip Balister2010-04-032-1/+57
|
* Add ability to change uart baud rate. (works)Philip Balister2010-04-031-1/+12
|
* Yes, I am an idiot.Philip Balister2010-04-031-0/+0
|
* Update to use register definitions from header file.Philip Balister2010-04-023-4/+4
|
* Don't need to use malloc to get the correct sized struct anymore.Philip Balister2010-04-021-12/+8
|
* Convert to use register include file. Fix peek/poke16 program.Philip Balister2010-04-025-13/+112
| | | | | Add program to cycle through LED's and test buttons. Only pushbuttons tested at the moment.
* Handle 32 bit data to spi controller.Philip Balister2010-04-021-2/+5
|
* Allow variable length spi messages.Philip Balister2010-04-011-5/+6
|
* Spi word length is in bits, not bytes.Philip Balister2010-04-011-1/+1
|
* Minor fixes.Philip Balister2010-03-291-2/+2
|
* Working version.Philip Balister2010-03-261-1/+1
|
* Add test program to send characters to the wishbone uart.Philip Balister2010-03-262-1/+42
|
* Update read/write test program to new header name and add to Makefile.Philip Balister2010-03-252-3/+7
|
* Updates for header file change from usrp1_e.h to usrp_e.h.root2010-03-254-16/+16
|
* Makefile and usrp-e-spi edits, add i2c test program.Philip Balister2010-03-243-1/+84
|
* Merge branch 'u1e_uhd' of git@ettus.sourcerepo.com:ettus/uhd into u1e_uhdPhilip Balister2010-03-241-5/+21
|\
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 16:30:17 +0000