uhd - Ettus' UHD Repository

	Commit message (Expand)	Author	Age	Files	Lines
...
*	Remove rand for now. Fix bug in data rate calculation.	Philip Balister	2010-05-18	1	-2/+4
*	Revert "Update test program to reflect what is in the FPGA image."	Philip Balister	2010-05-18	1	-20/+21
*	Update test program to reflect what is in the FPGA image.	Philip Balister	2010-05-14	1	-21/+20
*	got clock gen config working and tested	Josh Blum	2010-05-13	1	-4/+6
*	Connect enable to the correct gpio.	Philip Balister	2010-05-13	1	-1/+1
*	Change to 24 bit transfers.	Philip Balister	2010-05-13	1	-2/+2
*	Print a . for every packet received.	Philip Balister	2010-05-13	2	-0/+5
*	Add calculation for data trasnfer rates.	Philip Balister	2010-05-12	1	-3/+43
*	Add program to do initial configuration of the clkgen chip.	Philip Balister	2010-05-10	2	-1/+298
*	Update usrp_e.h file from kernel header.	Philip Balister	2010-05-07	1	-5/+0
*	First pass at data transfer program that uses CRC.	Philip Balister	2010-05-07	2	-1/+200
*	Print an error and exit if open fails for some programs.	Philip Balister	2010-05-07	3	-0/+17
*	Remove workaround for driver hang.	root	2010-05-05	3	-6/+2
*	Spi data returned in struct now.	Philip Balister	2010-05-03	1	-1/+1
*	Update path to put module in.	Philip Balister	2010-05-03	1	-1/+1
*	Add hack to work around driver race.	Philip Balister	2010-05-03	2	-0/+4
*	Add a hack to work around a driver race. Remove when teh driver is fixed.	Philip Balister	2010-05-03	1	-0/+2
*	Change overrun indication. New progress indicator. Turn on RT scheduler for	Philip Balister	2010-05-02	1	-2/+24
*	Update IP address for my home desktop. Change module version to 2.6.33.	Philip Balister	2010-05-02	2	-3/+3
*	Add script to setup board id info in eeprom.	Philip Balister	2010-04-29	1	-0/+17
*	Various updates to test programs.	Philip Balister	2010-04-28	4	-8/+93
*	Add program to exercise interface using internal fpga data source and data sink.	Philip Balister	2010-04-27	2	-1/+172
*	Send only required number of bytes. Do it for longer.	Philip Balister	2010-04-27	1	-2/+2
*	Updates to test programs.	Philip Balister	2010-04-23	3	-14/+181
*	Update transfer test program to use usrp_transfer_frame struct.	Philip Balister	2010-04-22	2	-17/+60
*	Add program to setup debug pins.	Philip Balister	2010-04-20	3	-1/+83
*	Initialize data array to help show when reads fail. Report return value	Philip Balister	2010-04-20	1	-0/+5
*	usrp-e-spi: change active edges around.	Philip Balister	2010-04-20	1	-1/+1
*	usrp-e-i2c always uses hex arguments.	Philip Balister	2010-04-20	1	-6/+10
*	Always put new bin file in /home/root.	Philip Balister	2010-04-20	1	-2/+2
*	Fix silly typo in script.	Josh Blum	2010-04-20	1	-0/+1
*	Fix script to write board id eeprom.	Josh Blum	2010-04-20	1	-2/+2
*	Add scripts to read and write board id info into usrp e id eeprom	Philip Balister	2010-04-20	2	-0/+20
*	pulled in master and got usrp-e code compiling	Josh Blum	2010-04-16	2	-2/+2
*	Fix typo.	Philip Balister	2010-04-13	1	-0/+1
*	Test program to verify GPIO on daughterboards. For success, connect gpios on	Philip Balister	2010-04-09	3	-7/+94
*	Attempt to make scripts run inside and outside GHQ.	Philip Balister	2010-04-03	5	-6/+22
*	Add program to read from serial port and print to screen. (works)	Philip Balister	2010-04-03	2	-1/+57
*	Add ability to change uart baud rate. (works)	Philip Balister	2010-04-03	1	-1/+12
*	Yes, I am an idiot.	Philip Balister	2010-04-03	1	-0/+0
*	Update to use register definitions from header file.	Philip Balister	2010-04-02	3	-4/+4
*	Don't need to use malloc to get the correct sized struct anymore.	Philip Balister	2010-04-02	1	-12/+8
*	Convert to use register include file. Fix peek/poke16 program.	Philip Balister	2010-04-02	5	-13/+112
*	Handle 32 bit data to spi controller.	Philip Balister	2010-04-02	1	-2/+5
*	Allow variable length spi messages.	Philip Balister	2010-04-01	1	-5/+6
*	Spi word length is in bits, not bytes.	Philip Balister	2010-04-01	1	-1/+1
*	Minor fixes.	Philip Balister	2010-03-29	1	-2/+2
*	Working version.	Philip Balister	2010-03-26	1	-1/+1
*	Add test program to send characters to the wishbone uart.	Philip Balister	2010-03-26	2	-1/+42
*	Update read/write test program to new header name and add to Makefile.	Philip Balister	2010-03-25	2	-3/+7