aboutsummaryrefslogtreecommitdiffstats
path: root/fpga/usrp3/top
Commit message (Collapse)AuthorAgeFilesLines
* fpga: e320: Add DRAM portsWade Fife2022-02-181-97/+97
| | | | | This adds two additional ports to the DRAM, for a total of up to four channels connected to DRAM.
* fpga: n3xx: Fix DRAM FIFO address alignmentWade Fife2022-02-103-6/+6
|
* fpga: e31x: Add DRAM supportWade Fife2022-02-1015-99/+1499
| | | | | | | | | This adds DRAM support to E31x devices. Due to the size of the DDR3 memory controller, it is not enabled by default. You can include the memory controller IP in the build by adding the DRAM environment variable to your build. For example: DRAM=1 make E310_SG3
* fpga: x400: Add DRAM enable macroJavier Valenzuela2022-02-101-0/+4
|
* fpga: b2xx: Generate utilization report filesMartin Braun2022-02-102-18/+24
| | | | | | | | | | | | Currently, the build process copies the .twr and .syr files into the build/ process after running ISE. For a succinct utilization report, those files are not suitable, though, because they contain too much information. However, the build process already produces a custom, short utilization report using grep and a summary of those reports. This patch modifies the build such that the same output is copied into a usrp_$product_fpga.rpt file, similar to our gen-3 devices.
* fpga: x400: zbx: cpld: Bump ZBX regmap copyrightJavier Valenzuela2022-02-1011-11/+11
|
* fpga: x400: cpld: Bump CMI wrapper copyrightJavier Valenzuela2022-02-102-2/+2
|
* fpga: x400: Bump minor versionWade Fife2022-02-073-8/+8
|
* fpga: x400: Update rfnoc_image_core filesWade Fife2022-02-078-98/+1327
| | | | | Updates the RFNoC image core files to include DRAM and default image changes.
* fpga: x400: Add Replay to 100 and 200 MHz imagesWade Fife2022-02-072-36/+107
| | | | | This adds the RFNoC replay block to the defautl 100 and 200 MHz images for X410.
* fpga: x400: Add DRAM supportWade Fife2022-02-075-106/+1272
|
* fpga: x400: Set DRAM speed to 2.0 GT/sWade Fife2022-02-071-26/+26
|
* fpga: x400: Add axi_inter_4x64_512_bd IPWade Fife2022-02-073-0/+604
|
* fpga: x400: Add axi_inter_2x128_512_bd IPWade Fife2022-02-073-0/+449
|
* images: Update N32x CPLD manifestHumberto Jimenez2022-01-311-1/+1
|
* fpga: n3xx: rh: cpld: Refactor CPLD build processHumberto Jimenez2022-01-256-24/+119
|
* fpga: x400: cpld: Bump copyrightJavier Valenzuela2022-01-259-9/+9
|
* fpga: x400: Bump copyrightJavier Valenzuela2022-01-2514-14/+14
|
* fpga: x400: Expand PS GPIO port for DIO controlJavier Valenzuela2022-01-257-19/+58
|
* fpga: x400: Add SPI bus support for GPIO portsJavier Valenzuela2022-01-259-60/+1338
|
* fpga: x400: Add GPIO control via ATR and DB stateJavier Valenzuela2022-01-2514-199/+2932
|
* fpga: x400: Connect Radio Blocks to DIOJavier Valenzuela2022-01-2510-305/+626
|
* fpga: x400: Fix rfnoc_image_core.vh pathWade Fife2022-01-121-1/+1
| | | | | | Previously, when running rfnoc_image_builder, the rfnoc_image_core.vh file in the main x400 directory was being used instead of the one generated by rfnoc_image_builder.
* fpga: e320: Connect CTRL_IN pins to FPGAMartin Braun2022-01-102-1/+12
| | | | | | | | These pins control hardware-controlled fast-lock for tuning or cycle-accurate gain control. This commit does nothing to these pins other than expose them into the design and assign them to zero. This does not change the current behaviour (the motherboard has pull-downs on these pins, so they're low by default).
* fpga: e320: Remove copy/paste from N310 codeMartin Braun2022-01-101-9/+0
|
* fpga: x300: Fix time register readbackWade Fife2021-12-151-2/+2
|
* fpga: x300: OR ATR signals going into db_controlMartin Braun2021-12-071-1/+10
| | | | | | | | | | | Before this change, only the channel 0 ATR state was sent to the db_control module. For TwinRX, this had the disadvantage that when only Channel 1 was used, the FP- and LED-GPIOs could not track the radio's ATR state (e.g., no LED would light up in this case). Note that unlike UHD 3, there is only one db_control module per slot. There are therefore no options to map GPIOs to track the ATR state of an individual channel.
* fpga: x400: cpld: Add manufacturing supportHumberto Jimenez2021-12-014-7/+27
| | | | | This commit enables a special personality on the X410 motherboard CPLD required for NI manufacturing purposes only.
* fpga: x400: Refactor CPLDs build processHumberto Jimenez2021-12-0133-254/+733
| | | | | | | | | | This commit refactors the X410's CPLDs build process to make it similar to other FPGA targets within the repo. The new process relies on basic Quartus build utilities. Additionally, this commit adds support for an alternative MAX10 CPLD for the motherboard CPLD implementation. Both previous (10M04) and new variant (10M08) are supported concurrently. The images package mapping is updated to reflect these changes.
* x410: correct 100GbE link speedAndrew Lynch2021-11-022-2/+2
|
* fpga: Shorten line length for Launchpad linterAaron Rossetto2021-10-281-2/+4
|
* fpga: x300: Update synchronizer constraintWade Fife2021-09-131-1/+1
|
* fpga: n3xx: Update synchronizer constraintWade Fife2021-09-131-3/+2
|
* fpga: Remove stale references to UHD_FPGA_DIRWade Fife2021-09-081-2/+1
|
* fpga: Set default part for sim in setupenv.shWade Fife2021-08-305-0/+20
| | | | | | | | | This sets the ARCH and PART_ID environment variables so that the selected part family is used for simulations by default. This can be overridden by changing them in the Makefile for the testbench if a testbench requires a specific part family. Prior to this change, the default was always ARCH=kintex7, PART_ID=xc7k410t/ffg900/-2, which required support for that part to be installed.
* x300: Fix sfpp_io_core tuser widthWade Fife2021-08-271-1/+1
|
* N3xx: Fix White Rabbitmichael-west2021-08-041-0/+10
| | | | | | | Reconnect the signals from the White Rabbit module to the TDC in the FPGA. Signed-off-by: michael-west <michael.west@ettus.com>
* fpga: x400: Remove stale information in register mapHumberto Jimenez2021-07-283-9/+9
| | | | | | White Rabbit is not supported in X410, however the register map included an incorrect reference to this unsupported feature. This commit removes the WR reference from both the source and html files.
* fpga: x400: Fix x4xx_qsfp_wrapper testbenchWade Fife2021-06-221-0/+3
| | | | | Reorder dependencies so that sc_util_v1_0_vl_rfs.sv gets compiled first when using ModelSim.
* x400: sim: Move testbenches to sim folderWade Fife2021-06-1713-0/+0
|
* fpga: Update testbenches to work in ModelSimWade Fife2021-06-178-89/+232
|
* fpga: x400: Add makefiles for RF testbenchesWade Fife2021-06-176-0/+209
|
* fpga: x400: zbx: Add support for ZBX CPLDJavier Valenzuela2021-06-1037-0/+17727
| | | | | | | Co-authored-by: Cherwa Vang <cherwa.vang@ni.com> Co-authored-by: Martin Braun <martin.braun@ettus.com> Co-authored-by: Max Köhler <max.koehler@ni.com> Co-authored-by: Paul Butler <paul.butler@ni.com>
* fpga: x400: cpld: Add support for X410 motherboard CPLDMax Köhler2021-06-1042-0/+8377
| | | | | Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com> Co-authored-by: Javier Valenzuela <javier.valenzuela@ni.com>
* fpga: x400: Add support for X410 motherboard FPGAWade Fife2021-06-10204-0/+299632
| | | | | | | | | | | | | Co-authored-by: Andrew Moch <Andrew.Moch@ni.com> Co-authored-by: Daniel Jepson <daniel.jepson@ni.com> Co-authored-by: Javier Valenzuela <javier.valenzuela@ni.com> Co-authored-by: Joerg Hofrichter <joerg.hofrichter@ni.com> Co-authored-by: Kumaran Subramoniam <kumaran.subramoniam@ni.com> Co-authored-by: Max Köhler <max.koehler@ni.com> Co-authored-by: Michael Auchter <michael.auchter@ni.com> Co-authored-by: Paul Butler <paul.butler@ni.com> Co-authored-by: Wade Fife <wade.fife@ettus.com> Co-authored-by: Hector Rubio <hrubio@ni.com>
* fpga: Update rfnoc_image_core for all targetsWade Fife2021-06-1018-5780/+6492
| | | | | | Update rfnoc_image_core.v to take into account the new image_core_name fields and version strings. Add new rfnoc_image_core.vh. Update YAML where needed.
* fpga: Change RFNoC YAML version numbers to stringsWade Fife2021-06-0810-20/+20
| | | | | Change version from a numeric to a string, in order to differentiate between versions like "1.1" and "1.10".
* fpga: e320: Improve timing on LVDS interfaceWade Fife2020-12-111-3/+2
|
* fpga: e31x: Add OOT sources to Makefile.e31x.incWade Fife2020-11-131-0/+8
|
* fpga: e31x: Change image file to e310_rfnoc_image_coreWade Fife2020-09-093-5/+5
| | | | | | | This renames e31x_rfnoc_image_core.* to e310_rfnoc_image_core.*. This makes the naming consistent with the rest of the build process (which uses "e310" for all variants of e31x) and fixes an issue in which the wrong file name was used by rfnoc_image_builder.
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-10 05:21:42 +0000