summaryrefslogtreecommitdiffstats
path: root/firmware
Commit message (Collapse)AuthorAgeFilesLines
* Merging USRP X300 and X310 support!!Ben Hilburn2014-02-04176-0/+63251
|
* Squashed commit uhd/cleanup.Ben Hilburn2013-11-278-806/+486
|
* octoclock: make install sets fuse values before burning hex fileNicholas Corgan2013-09-061-1/+1
|
* Merge branch 'maint'Josh Blum2013-08-231-1/+1
|\
| * usrp2: fix firmware rx clear register offsetJosh Blum2013-08-231-1/+1
| | | | | | | | | | | | | | When an ICMP dest unreachable pkt arrives, the fw needs to know how to shutoff the DSP. This offset for the reset register was broken by a previous fix for register overlap.
* | Corrected PDD1 config on gps_nmea neetbuoyboy2013-08-201-1/+1
| |
* | OctoClock supportNicholas Corgan2013-06-073-0/+970
|/
* b100: firmware updates for next branch compatabilityJosh Blum2012-07-193-29/+33
|
* usrp2: fix fw bug for spi transact (order of operations)Josh Blum2012-06-071-2/+2
|
* fifo ctrl: various tweaksJosh Blum2012-03-231-2/+5
|
* fifo ctrl: ~usrp2_fifo_ctrl acks, usrp2 DCM workaround, bootloader no blinkieJosh Blum2012-03-232-1/+6
|
* fifo ctrl: spi core work and host implementationJosh Blum2012-03-232-15/+11
|
* spi: work on fw support for simple spi coreJosh Blum2012-03-239-137/+71
|
* usrp2: host and fw implementation for fifo controlJosh Blum2012-03-231-0/+5
|
* usrp2: work on alternative stream destinationJosh Blum2012-03-236-102/+122
|
* usrp2: fw unlocks when ICMP dest unreachableJosh Blum2012-03-211-1/+4
|
* B100: enable_gpif(0) disables FIFO output clock on FX2. this prevents the ↵Nick Foster2012-03-161-2/+2
| | | | "stuffing zeroes" problem and improves transport reliability.
* usrp2: removed unused memory map entriesJosh Blum2012-02-271-5/+1
|
* B100: Firmware reset tweaks.Nick Foster2012-02-092-47/+29
|
* B100: use FPGA external reset on initNick Foster2012-02-061-1/+6
|
* uhd: added/renamed various readme filesJosh Blum2012-02-042-6/+31
|
* B100/B150: firmware disable FIFOs until host enables to keep junk outNick Foster2012-02-032-8/+11
|
* b100: bump compat numbers for slave fifo modeJosh Blum2012-02-011-1/+1
| | | | | | Conflicts: host/lib/usrp/b100/b100_impl.hpp
* B100 firmware changes to allow slave mode TX/RX.Nick Foster2012-02-014-162/+59
|
* usrp2: same change but to fw updaterJosh Blum2012-01-242-11/+3
|
* usrp2: firmware should reset dsp on icmp pktJosh Blum2012-01-242-11/+8
| | | | | | | | 1) This should kill any streaming, the previous calls would just stop continuous streaming 2) The breaks were changed to returns to avoid reprogramming the framer.
* usrp2: fw fix for hal_uart_getc_noblock return codeJosh Blum2012-01-043-5/+7
|
* uhd: tweaks to calibration utilitiesJosh Blum2011-11-231-981/+0
|
* uhd: useful tweaks from userJosh Blum2011-11-081-0/+1
|
* Fixing VID comment in firmware to reflect ERLLC rather than FSF.Ben Hilburn2011-10-141-1/+1
|
* b100: new eeprom map for special 9 byte serialJosh Blum2011-10-122-4/+5
|
* B100: change B100 PID in usb_descriptors.a51 as wellNick Foster2011-10-111-1/+1
|
* B100: use PA6 for pktendNick Foster2011-10-101-2/+1
|
* 1 Character Patch for USRP1 usrp_eeprom.bin generationJason Abele2011-10-101-1/+1
|
* B100: modify build_eeprom for correct B100 PIDNick Foster2011-10-101-1/+1
|
* B100 firmware fix for FPGA load race condition, plus a little cleanup for ↵Nick Foster2011-10-102-19/+14
| | | | readability
* usrp2: uart/udp work in host and fw, workingJosh Blum2011-09-286-41/+158
|
* ZPU/USRP2: first stab at UDP UART firmwareNick Foster2011-09-283-2/+20
|
* n-series: removed unused bootloader files in fwJosh Blum2011-09-084-647/+0
|
* N2XX: fix bug in firmware updater (don't use local variables for static ↵Nick Foster2011-08-092-3/+6
| | | | data). this fixes the "n210 bricking on update while streaming" bug.
* usrp2: shutoff streaming using the stop bit (fix)Josh Blum2011-07-292-4/+5
|
* usrp2: remove hw config readback, not neededJosh Blum2011-07-281-8/+3
|
* usrp2: comment out poll + print overflow/underflow in fwJosh Blum2011-07-191-0/+2
|
* usrp2: added fw minor and moved ICMP dest error handling to txrx appJosh Blum2011-07-182-28/+36
|
* usrp2: use the err transport for tx/err, and rx xports are recv onlyJosh Blum2011-07-171-7/+7
|
* N2XX: firmware stops device streaming on fw update, and updater script ↵Nick Foster2011-06-152-1/+24
| | | | checks hw rev before proceeding
* b100: added b100 firmware (squashed)Josh Blum2011-06-1418-4/+2127
|
* N2XX: fix UART bug for GPSDONick Foster2011-06-141-0/+1
|
* usrp2: combined peek and poke commands and added virtual firmware registersJosh Blum2011-05-011-27/+24
| | | | | It would be nice to have persistent registers in the device to do things like device locking. Rather than invent a new communication type, we just repurposed the register manipulation.
* Merge branch 'master' into nextJosh Blum2011-04-301-6/+8
|\ | | | | | | | | Conflicts: host/lib/usrp/usrp2/usrp2_regs.cpp
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 00:47:45 +0000