summaryrefslogtreecommitdiffstats
path: root/firmware
Commit message (Collapse)AuthorAgeFilesLines
* UDP firmware update support for USRP2P.Nick Foster2010-08-1710-372/+169
| | | | | | | | The hooks are in there for USRP2, but without CPLD changes it won't support it. Added an app host/utils/usrp2p_fw_update.py to write to USRP2P over the wire. Lots of TODOs in that file. Caveat -- fw_common.h, bootloader_utils.h, and the .py app MUST ALL AGREE!
* Finished GPS driver, more or less.Nick Foster2010-08-162-9/+10
| | | | Should detect any 115kbaud GPS on the serial port, as long as it outputs GPRMC packets. Tweaked the serial driver for a stupid off-by-one mistake.
* Fixed behavior when no GPS present.Nick Foster2010-08-132-4/+3
|
* Small fix for fngetsNick Foster2010-08-131-2/+2
|
* Increased UART timeout for slow Jackson Labs GPSDO. Fixed up timeout code.Nick Foster2010-08-133-2/+3
|
* Added timeout functionality for UART gets() calls. use fngets_timeout(). ↵Nick Foster2010-08-135-1/+29
| | | | timeout defined in hal_uart.h.
* first stab at a GPS driver in gps_ctrl.cpp. not the most expandable thing in ↵Nick Foster2010-08-133-0/+11
| | | | the world but there's only so many GPS interfaces out there.
* Fixed GPS UART stuff. Works OK.Nick Foster2010-08-123-7/+5
|
* Added UART transactions to the DUDE/BRO protocol.Nick Foster2010-08-124-1/+43
|
* Working support for multiple UARTs.Nick Foster2010-08-125-83/+122
| | | | | | | Default behavior (printf, gets, etc.) routes to DEFAULT_UART, set in hal_uart.h. Use fputstr() to print to other UARTs. Bring fgets() from hal_io.c out in hal_io.h if you want to read data from other UARTs. Still blocking. No interrupt-driven stuff yet.
* Branch to make use of quad UART on USRP2P.Nick Foster2010-08-114-25/+50
|
* Merge branch 'master' into usrp2pNick Foster2010-08-105-169/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this was the merge from hell Conflicts: firmware/microblaze/Makefile.am firmware/microblaze/bootstrap firmware/microblaze/configure.ac firmware/microblaze/lib/Makefile.inc host/lib/CMakeLists.txt host/lib/usrp/mimo_usrp.cpp host/lib/usrp/simple_usrp.cpp host/lib/usrp/usrp2/clock_ctrl.cpp host/lib/usrp/usrp2/codec_impl.cpp host/lib/usrp/usrp2/dboard_impl.cpp host/lib/usrp/usrp2/mboard_impl.cpp host/lib/usrp/usrp2/usrp2_iface.hpp host/lib/usrp/usrp2/usrp2_impl.hpp host/lib/usrp/usrp2/usrp2_regs.hpp host/test/CMakeLists.txt
| * usrp2: added fpga compat number, renamed firmware proto version to compatJosh Blum2010-08-091-5/+6
| |
| * usrp2: reorganized firmware directoryJosh Blum2010-07-3085-911/+278
| |
* | Merge branch 'master' of git@ettus.sourcerepo.com:ettus/uhdpriv into usrp2pNick Foster2010-07-291-1/+1
|\| | | | | | | | | | | | | Conflicts: host/lib/usrp/usrp2/mboard_impl.cpp host/lib/usrp/usrp2/usrp2_regs.hpp
| * usrp2: added tx policy register and changed fw to not handle error in buffer ↵Josh Blum2010-07-291-1/+1
| | | | | | | | pool
* | Clock bugs, LED order.Nick Foster2010-07-296-20/+34
| | | | | | | | | | | | | | | | | | | | Figured out cold-start problem with Matt's help -- the DCM wasn't being reset. This also explains why USRP2 didn't like it when clocks_mimo_config was omitted -- it was sneakily resetting the DCM while enabling/disabling ref outputs. Also re-did USRP2P LED order and genericized the LED settings so LED_D is LED_D for both USRP2 and USRP2P.
* | Added back in clock_mimo_enable stuff since USRP2 breaks without it.Nick Foster2010-07-282-8/+8
| | | | | | | | Should look further into initializing ALL clocks on host side.
* | Stripped out all the clock functionality except for init'ing the FPGA. Clock ↵Nick Foster2010-07-286-256/+18
| | | | | | | | smarts have been host-side for a while, so this is redundant code.
* | Widened SPI slave select bus to 16 bits in host and firmware.Nick Foster2010-07-281-1/+1
| |
* | Ethernet blinky light changes. Link LED works. D201 (next to PHY) blinks on ↵Nick Foster2010-07-281-1/+8
| | | | | | | | TX. Yellow LED on connector blinks on TX/RX.
* | Ethernet mods for activity LED.Nick Foster2010-07-274-4/+33
| |
* | Ethernet PHY re-do.Nick Foster2010-07-278-12/+603
| |
* | Deleted manually those files to correspond with USRP2P branch.Nick Foster2010-07-2661-8673/+0
| |
* | New branch with firmware dir from USRP2P branch.Nick Foster2010-07-26112-45/+13382
|/
* usrp2: installed a simple dbsm_rx_inspector, it wont work without it...Josh Blum2010-07-161-4/+7
|
* usrp2: remove mb intervention on outgoing packetsJosh Blum2010-07-151-28/+6
|
* usrp2: forward errors in the dbsm to communicate them up to the hostJosh Blum2010-07-121-2/+4
|
* usrp2: Added a peek64 to read pairs of 32 bit numbers such as time64Josh Blum2010-07-051-0/+8
| | | | also added a templated host to/from network conversion in byteswap.hpp (didnt use it though)
* usrp2: increased transport buffer minimum size, and added warningJosh Blum2010-07-051-4/+4
| | | | | | added more notes on buffer size to the manual pulled in some firmware fixes from the mimo work, just to have them in here
* usrp2 mb: replace hard coded constants with macros for rx offsetJosh Blum2010-06-181-2/+2
|
* Moved usrp2 eeprom addr read/write to host control over i2c/eeprom interface ↵Josh Blum2010-05-111-20/+3
| | | | | | | | | | calls. No longer part of the dude/bro protocol. Simplified the mac and ip addr read write code in mboard impl. Modified the mac addr type to take byte_vector_t from serial.hpp types.
* Added a place for serdes control on the host.Josh Blum2010-05-102-20/+20
| | | | | Fix bug in codec control. Comment out some clock control in fw code.
* Merge branch 'shrinkfw' into usrp2Josh Blum2010-05-1010-467/+4
|\
| * Moved some misc setting registers into host.Josh Blum2010-04-281-10/+0
| |
| * removed some unused things like gpio from microblaze codeJosh Blum2010-04-287-312/+4
| |
| * Added reload flag to the stream cmd.Josh Blum2010-04-285-147/+2
| | | | | | | | | | This reloads the last command to handle continuous streaming in hardware. Moved rx control register setup and stream command issuing to the host.
* | added icmp echo reply to usrp2Josh Blum2010-05-031-1/+18
|/
* Merge branch 'eeprom' of git@ettus.sourcerepo.com:ettus/uhdprivJosh Blum2010-04-265-127/+0
|\
| * Moved reading the eeprom (dboard ids) onto the host.Josh Blum2010-04-235-127/+0
| | | | | | | | | | Created a eeprom parser for the format in the dboard. Removed the support from the microblaze code.
* | renamed the firmware main image to txrx_uhd.binJosh Blum2010-04-252-2/+2
|/
* toggle led a for continuous streamingJosh Blum2010-04-221-0/+6
|
* Added protocol version number to usrp2 common header and data struct.Josh Blum2010-04-211-5/+29
|
* pulled aux dac and adc support from microblaze, its in the host nowJosh Blum2010-04-197-280/+0
|
* removed unused firmware codeJosh Blum2010-04-133-370/+0
|
* Moved ad9777 control 100% on to the hostJosh Blum2010-04-135-168/+0
|
* Reworked the spi part of the dboard interface.Josh Blum2010-04-071-18/+7
| | | | | | It turns out to be more complicated. The integer type is better for holding the bits. The edges can be different, so the spi config hold 2 edge setting for mosi and miso.
* added 16 bit peek and poke, 16 bit register defs for gpios and atrsJosh Blum2010-04-051-3/+27
|
* extended stream cmd with mode enum, and extended fragment flags in metadataJosh Blum2010-04-031-2/+2
|
* added spi slaves to regs, use std copy for buffsJosh Blum2010-03-311-1/+1
|
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 21:23:38 +0000