| Commit message (Expand) | Author | Age | Files | Lines |
|---|
| * | Bring in changes since last week. | Nick Foster | 2010-08-10 | 1 | -18/+10 |
| * | Interrupt-driven I2C. txrx_uhd uses async i2c for comms. | Nick Foster | 2010-08-10 | 4 | -24/+259 |
| * | usrp2: added fpga compat number, renamed firmware proto version to compat | Josh Blum | 2010-08-09 | 1 | -5/+6 |
| * | usrp2: reorganized firmware directory | Josh Blum | 2010-07-30 | 85 | -911/+278 |
| * | usrp2: added tx policy register and changed fw to not handle error in buffer ... | Josh Blum | 2010-07-29 | 1 | -1/+1 |
| * | usrp2: installed a simple dbsm_rx_inspector, it wont work without it... | Josh Blum | 2010-07-16 | 1 | -4/+7 |
| * | usrp2: remove mb intervention on outgoing packets | Josh Blum | 2010-07-15 | 1 | -28/+6 |
| * | usrp2: forward errors in the dbsm to communicate them up to the host | Josh Blum | 2010-07-12 | 1 | -2/+4 |
| * | usrp2: Added a peek64 to read pairs of 32 bit numbers such as time64 | Josh Blum | 2010-07-05 | 1 | -0/+8 |
| * | usrp2: increased transport buffer minimum size, and added warning | Josh Blum | 2010-07-05 | 1 | -4/+4 |
| * | usrp2 mb: replace hard coded constants with macros for rx offset | Josh Blum | 2010-06-18 | 1 | -2/+2 |
| * | Moved usrp2 eeprom addr read/write to host control over i2c/eeprom interface ... | Josh Blum | 2010-05-11 | 1 | -20/+3 |
| * | Added a place for serdes control on the host. | Josh Blum | 2010-05-10 | 2 | -20/+20 |
| * | Merge branch 'shrinkfw' into usrp2 | Josh Blum | 2010-05-10 | 10 | -467/+4 |
| |\ |
|
| | * | Moved some misc setting registers into host. | Josh Blum | 2010-04-28 | 1 | -10/+0 |
| | * | removed some unused things like gpio from microblaze code | Josh Blum | 2010-04-28 | 7 | -312/+4 |
| | * | Added reload flag to the stream cmd. | Josh Blum | 2010-04-28 | 5 | -147/+2 |
| * | | added icmp echo reply to usrp2 | Josh Blum | 2010-05-03 | 1 | -1/+18 |
| |/ |
|
| * | Merge branch 'eeprom' of git@ettus.sourcerepo.com:ettus/uhdpriv | Josh Blum | 2010-04-26 | 5 | -127/+0 |
| |\ |
|
| | * | Moved reading the eeprom (dboard ids) onto the host. | Josh Blum | 2010-04-23 | 5 | -127/+0 |
| * | | renamed the firmware main image to txrx_uhd.bin | Josh Blum | 2010-04-25 | 2 | -2/+2 |
| |/ |
|
| * | toggle led a for continuous streaming | Josh Blum | 2010-04-22 | 1 | -0/+6 |
| * | Added protocol version number to usrp2 common header and data struct. | Josh Blum | 2010-04-21 | 1 | -5/+29 |
| * | pulled aux dac and adc support from microblaze, its in the host now | Josh Blum | 2010-04-19 | 7 | -280/+0 |
| * | removed unused firmware code | Josh Blum | 2010-04-13 | 3 | -370/+0 |
| * | Moved ad9777 control 100% on to the host | Josh Blum | 2010-04-13 | 5 | -168/+0 |
| * | Reworked the spi part of the dboard interface. | Josh Blum | 2010-04-07 | 1 | -18/+7 |
| * | added 16 bit peek and poke, 16 bit register defs for gpios and atrs | Josh Blum | 2010-04-05 | 1 | -3/+27 |
| * | extended stream cmd with mode enum, and extended fragment flags in metadata | Josh Blum | 2010-04-03 | 1 | -2/+2 |
| * | added spi slaves to regs, use std copy for buffs | Josh Blum | 2010-03-31 | 1 | -1/+1 |
| * | Moved dsp (rx and tx), time config, and clock config (mostly) into the host. | Josh Blum | 2010-03-31 | 1 | -116/+0 |
| * | Refactor ATR part of dboard interface (and some constants). | Josh Blum | 2010-03-31 | 1 | -49/+24 |
| * | removed that fw sets seq stuff, not applicable | Josh Blum | 2010-03-26 | 1 | -16/+1 |
| * | insert correct control word and vrt len into the buffer | Josh Blum | 2010-03-26 | 1 | -19/+15 |
| * | Overhaullllllled the way we do streaming. There is an odd bug where | Josh Blum | 2010-03-25 | 2 | -81/+96 |
| * | added easy way to compile firmware for debug mode | Josh Blum | 2010-03-24 | 1 | -7/+9 |
| * | Added recovery app to use raw socket to burn known ip addr. | Josh Blum | 2010-03-16 | 4 | -36/+32 |
| * | Added ability to set the subdevices in use for rx and tx dboards. | Josh Blum | 2010-03-16 | 2 | -4/+11 |
| * | Ability to burn mac addr and ip addr to usrp2 (over ip/udp for now). | Josh Blum | 2010-03-15 | 4 | -36/+96 |
| * | Added simple device to handle wrapping general properties up into simple api. | Josh Blum | 2010-03-10 | 1 | -0/+10 |
| * | Moved timeouts into the udp transports. | Josh Blum | 2010-03-04 | 3 | -18/+11 |
| * | The net common is too slow in usrp2 firmware to figure out if its vrt data. | Josh Blum | 2010-03-02 | 3 | -12/+28 |
| * | Send the number of samples per datagram over the control. | Josh Blum | 2010-03-01 | 1 | -29/+16 |
| * | Recv noise with uhd. | Josh Blum | 2010-03-01 | 1 | -0/+3 |
| * | Put fast path code (rx setup) back into txrx.c. | Josh Blum | 2010-02-23 | 1 | -29/+59 |
| * | Work on the io interface for a device (and some implementation work in usrp2). | Josh Blum | 2010-02-22 | 2 | -2/+5 |
| * | DDC enable with stream at control OTW | Josh Blum | 2010-02-19 | 1 | -3/+19 |
| * | DUC and DDC control packets OTW | Josh Blum | 2010-02-19 | 1 | -0/+55 |
| * | Added control for usrp2 aux dac and adc control. | Josh Blum | 2010-02-17 | 1 | -0/+39 |
| * | Added i2c control transactions in fw and host | Josh Blum | 2010-02-17 | 1 | -0/+28 |
