aboutsummaryrefslogtreecommitdiffstats
path: root/firmware
Commit message (Collapse)AuthorAgeFilesLines
* usrp3,x300: Replaced printfs with tracesAshish Chaudhari2015-02-126-173/+170
|
* usrp3: Added tracing library to usrp3 firmwareAshish Chaudhari2015-02-121-0/+80
|
* Initial commit E300 support.Martin Braun2014-10-0742-0/+8401
|
* Reorganized firmware/ subdirectory (x300->usrp3, zpu->usrp2)Martin Braun2014-10-07408-10/+177
|
* b200: Bumped FX3 firmware compat number to 7.Ashish Chaudhari2014-10-011-1/+1
|
* docs: Added a note on FX3 SDK versionMartin Braun2014-10-011-0/+1
|
* OctoClock: bugfixes/improvementsNicholas Corgan2014-08-2014-165/+193
| | | | | | | | | * Fixed Ethernet initialization problem * Improved external reference detection * Added gratuitous ARP, sent upon power-up * Tweaked host-side timing for initialization and firmware burning * Fixed logic for dealing with firmware incompatibility * Misc efficiency/reliability improvements to firmware's network code
* b200: Removed all AD9361 related firmwareAshish Chaudhari2014-08-1213-2747/+6
| | | | | | | - FX3 does not respond to AD9361 firmware transaction VREQs - FX3 does not respond to AD9361 SPI transaction VREQs - Deleted all AD9361 firmware files - Bumped FW compat to 6
* b200: AD9361 firmware bugfixesAshish Chaudhari2014-08-011-0/+19
| | | | | | | | | | - Fix for BUG #485: B200: Channels Swap Between Runs # Added code to transition state machine out of FDD while reconfiguring active chains. # bb:0b9929 Mon Jun 16 14:56:26 2014 -0700 - Fix for BUG #500: B210: RX channels are not phase aligned # Set bit to invert RX if internal LNA is bypassed # bb:0a4565 Thu Jun 5 17:10:37 2014 -0700
* b200: Moved AD9361 driver to hostAshish Chaudhari2014-08-014-11/+17
| | | | | | | - Switched to FPGA SPI engine - Moved firmware AD9361 driver to UHD - Bumped FW compat to 5, FPGA compat to 4 - Known Issue: AD9361 SPI rate is too slow
* OctoClock firmware upgrade, added host driverNicholas Corgan2014-07-2383-658/+12077
| | | | | | | | | | * OctoClock can communicate with UHD over Ethernet * Can read NMEA strings from GPSDO and send to host * Added multi_usrp_clock class for clock devices * uhd::device can now filter to return only USRP devices or clock devices * New OctoClock bootloader can accept firmware download over Ethernet * Added octoclock_burn_eeprom,octoclock_firmware_burner utilities * Added test_clock_synch example to show clock API
* Addressing comments from review.michael-west2014-07-171-9/+2
| | | | | | - Corrected types of some variables to be boost types. - Removed debugging code accidentally left in. - Changed some compiled out error messages to log messages.
* Fix for BUG #469: Bad/Empty GPS NMEA strings returned when the queries are ↵michael-west2014-07-171-4/+11
| | | | | | | | | made in a random wait iterative fashion Fix for BUG #460: X300: GPGGA sensor most often empty, while RMC is usually OK - Added checksum verification of NMEA strings - Improved handling of short or malformed strings - Fixed GPSDO data synchronization between X300 firmware and host
* x300: Changed bus_clk frequency to 166.67MHz.Ashish Chaudhari2014-04-281-5/+5
|
* b2xx: Pulling FX3 and AD9361 source code into master.Ben Hilburn2014-04-0724-0/+7291
|
* BUG #396: X3x0: Packet loss within burst while running full duplex overnightmichael-west2014-03-261-13/+9
| | | | - Disabled all packet forwarding
* BUG #396: Mid-Burst Sequence Errorsmichael-west2014-03-192-8/+10
| | | | | | | - Restored link state handling. - Enabled forwarding of packets not addressed to this device's MAC address. - Kept forwarding of broadcast packets disabled. NOTE: This is a workaround and not a permanent fix.
* BUG #371: X300: Dies and left in bad statemichael-west2014-03-033-50/+67
| | | | | | | - Disabled packet forwarding and link state cycle detection in firmware. - Fixed the link state algorithm so the updating runs the first time and the forwading update only happens when necessary. - Added check for 10GbE before calling MDIO functions.
* Putting the ICMP destination unreachable fix in X300 firmware.Ben Hilburn2014-02-141-34/+44
|
* Pushing the bulk of UHD-3.7.0 code.Ben Hilburn2014-02-146-364/+23
|
* Un-doing firmware change regarding ICMP packate handling.Ben Hilburn2014-02-041-44/+34
| | | | | | | | Reverting "x300: ICMP_DUR handler fixed. Supposedly closes #256." This reverts commit 69317629f353734d5ac21dc78be105b2f0164497. Resolved Conflicts: firmware/x300/x300/x300_main.c
* Merging USRP X300 and X310 support!!Ben Hilburn2014-02-04176-0/+63251
|
* Squashed commit uhd/cleanup.Ben Hilburn2013-11-278-806/+486
|
* octoclock: make install sets fuse values before burning hex fileNicholas Corgan2013-09-061-1/+1
|
* Merge branch 'maint'Josh Blum2013-08-231-1/+1
|\
| * usrp2: fix firmware rx clear register offsetJosh Blum2013-08-231-1/+1
| | | | | | | | | | | | | | When an ICMP dest unreachable pkt arrives, the fw needs to know how to shutoff the DSP. This offset for the reset register was broken by a previous fix for register overlap.
* | Corrected PDD1 config on gps_nmea neetbuoyboy2013-08-201-1/+1
| |
* | OctoClock supportNicholas Corgan2013-06-073-0/+970
|/
* b100: firmware updates for next branch compatabilityJosh Blum2012-07-193-29/+33
|
* usrp2: fix fw bug for spi transact (order of operations)Josh Blum2012-06-071-2/+2
|
* fifo ctrl: various tweaksJosh Blum2012-03-231-2/+5
|
* fifo ctrl: ~usrp2_fifo_ctrl acks, usrp2 DCM workaround, bootloader no blinkieJosh Blum2012-03-232-1/+6
|
* fifo ctrl: spi core work and host implementationJosh Blum2012-03-232-15/+11
|
* spi: work on fw support for simple spi coreJosh Blum2012-03-239-137/+71
|
* usrp2: host and fw implementation for fifo controlJosh Blum2012-03-231-0/+5
|
* usrp2: work on alternative stream destinationJosh Blum2012-03-236-102/+122
|
* usrp2: fw unlocks when ICMP dest unreachableJosh Blum2012-03-211-1/+4
|
* B100: enable_gpif(0) disables FIFO output clock on FX2. this prevents the ↵Nick Foster2012-03-161-2/+2
| | | | "stuffing zeroes" problem and improves transport reliability.
* usrp2: removed unused memory map entriesJosh Blum2012-02-271-5/+1
|
* B100: Firmware reset tweaks.Nick Foster2012-02-092-47/+29
|
* B100: use FPGA external reset on initNick Foster2012-02-061-1/+6
|
* uhd: added/renamed various readme filesJosh Blum2012-02-042-6/+31
|
* B100/B150: firmware disable FIFOs until host enables to keep junk outNick Foster2012-02-032-8/+11
|
* b100: bump compat numbers for slave fifo modeJosh Blum2012-02-011-1/+1
| | | | | | Conflicts: host/lib/usrp/b100/b100_impl.hpp
* B100 firmware changes to allow slave mode TX/RX.Nick Foster2012-02-014-162/+59
|
* usrp2: same change but to fw updaterJosh Blum2012-01-242-11/+3
|
* usrp2: firmware should reset dsp on icmp pktJosh Blum2012-01-242-11/+8
| | | | | | | | 1) This should kill any streaming, the previous calls would just stop continuous streaming 2) The breaks were changed to returns to avoid reprogramming the framer.
* usrp2: fw fix for hal_uart_getc_noblock return codeJosh Blum2012-01-043-5/+7
|
* uhd: tweaks to calibration utilitiesJosh Blum2011-11-231-981/+0
|
* uhd: useful tweaks from userJosh Blum2011-11-081-0/+1
|
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 23:25:01 +0000