uhd - Ettus' UHD Repository

	Commit message (Collapse)	Author	Age	Files	Lines
*	b100: firmware updates for next branch compatability	Josh Blum	2012-07-19	3	-29/+33
\|
*	usrp2: fix fw bug for spi transact (order of operations)	Josh Blum	2012-06-07	1	-2/+2
\|
*	fifo ctrl: various tweaks	Josh Blum	2012-03-23	1	-2/+5
\|
*	fifo ctrl: ~usrp2_fifo_ctrl acks, usrp2 DCM workaround, bootloader no blinkie	Josh Blum	2012-03-23	2	-1/+6
\|
*	fifo ctrl: spi core work and host implementation	Josh Blum	2012-03-23	2	-15/+11
\|
*	spi: work on fw support for simple spi core	Josh Blum	2012-03-23	9	-137/+71
\|
*	usrp2: host and fw implementation for fifo control	Josh Blum	2012-03-23	1	-0/+5
\|
*	usrp2: work on alternative stream destination	Josh Blum	2012-03-23	6	-102/+122
\|
*	usrp2: fw unlocks when ICMP dest unreachable	Josh Blum	2012-03-21	1	-1/+4
\|
*	B100: enable_gpif(0) disables FIFO output clock on FX2. this prevents the ↵	Nick Foster	2012-03-16	1	-2/+2
\| \| \| \|	"stuffing zeroes" problem and improves transport reliability.
*	usrp2: removed unused memory map entries	Josh Blum	2012-02-27	1	-5/+1
\|
*	B100: Firmware reset tweaks.	Nick Foster	2012-02-09	2	-47/+29
\|
*	B100: use FPGA external reset on init	Nick Foster	2012-02-06	1	-1/+6
\|
*	uhd: added/renamed various readme files	Josh Blum	2012-02-04	2	-6/+31
\|
*	B100/B150: firmware disable FIFOs until host enables to keep junk out	Nick Foster	2012-02-03	2	-8/+11
\|
*	b100: bump compat numbers for slave fifo mode	Josh Blum	2012-02-01	1	-1/+1
\| \| \| \| \| \|	Conflicts: host/lib/usrp/b100/b100_impl.hpp
*	B100 firmware changes to allow slave mode TX/RX.	Nick Foster	2012-02-01	4	-162/+59
\|
*	usrp2: same change but to fw updater	Josh Blum	2012-01-24	2	-11/+3
\|
*	usrp2: firmware should reset dsp on icmp pkt	Josh Blum	2012-01-24	2	-11/+8
\| \| \| \| \| \| \| \|	1) This should kill any streaming, the previous calls would just stop continuous streaming 2) The breaks were changed to returns to avoid reprogramming the framer.
*	usrp2: fw fix for hal_uart_getc_noblock return code	Josh Blum	2012-01-04	3	-5/+7
\|
*	uhd: tweaks to calibration utilities	Josh Blum	2011-11-23	1	-981/+0
\|
*	uhd: useful tweaks from user	Josh Blum	2011-11-08	1	-0/+1
\|
*	Fixing VID comment in firmware to reflect ERLLC rather than FSF.	Ben Hilburn	2011-10-14	1	-1/+1
\|
*	b100: new eeprom map for special 9 byte serial	Josh Blum	2011-10-12	2	-4/+5
\|
*	B100: change B100 PID in usb_descriptors.a51 as well	Nick Foster	2011-10-11	1	-1/+1
\|
*	B100: use PA6 for pktend	Nick Foster	2011-10-10	1	-2/+1
\|
*	1 Character Patch for USRP1 usrp_eeprom.bin generation	Jason Abele	2011-10-10	1	-1/+1
\|
*	B100: modify build_eeprom for correct B100 PID	Nick Foster	2011-10-10	1	-1/+1
\|
*	B100 firmware fix for FPGA load race condition, plus a little cleanup for ↵	Nick Foster	2011-10-10	2	-19/+14
\| \| \| \|	readability
*	usrp2: uart/udp work in host and fw, working	Josh Blum	2011-09-28	6	-41/+158
\|
*	ZPU/USRP2: first stab at UDP UART firmware	Nick Foster	2011-09-28	3	-2/+20
\|
*	n-series: removed unused bootloader files in fw	Josh Blum	2011-09-08	4	-647/+0
\|
*	N2XX: fix bug in firmware updater (don't use local variables for static ↵	Nick Foster	2011-08-09	2	-3/+6
\| \| \| \|	data). this fixes the "n210 bricking on update while streaming" bug.
*	usrp2: shutoff streaming using the stop bit (fix)	Josh Blum	2011-07-29	2	-4/+5
\|
*	usrp2: remove hw config readback, not needed	Josh Blum	2011-07-28	1	-8/+3
\|
*	usrp2: comment out poll + print overflow/underflow in fw	Josh Blum	2011-07-19	1	-0/+2
\|
*	usrp2: added fw minor and moved ICMP dest error handling to txrx app	Josh Blum	2011-07-18	2	-28/+36
\|
*	usrp2: use the err transport for tx/err, and rx xports are recv only	Josh Blum	2011-07-17	1	-7/+7
\|
*	N2XX: firmware stops device streaming on fw update, and updater script ↵	Nick Foster	2011-06-15	2	-1/+24
\| \| \| \|	checks hw rev before proceeding
*	b100: added b100 firmware (squashed)	Josh Blum	2011-06-14	18	-4/+2127
\|
*	N2XX: fix UART bug for GPSDO	Nick Foster	2011-06-14	1	-0/+1
\|
*	usrp2: combined peek and poke commands and added virtual firmware registers	Josh Blum	2011-05-01	1	-27/+24
\| \| \| \| \|	It would be nice to have persistent registers in the device to do things like device locking. Rather than invent a new communication type, we just repurposed the register manipulation.
*	Merge branch 'master' into next	Josh Blum	2011-04-30	1	-6/+8
\|\ \| \| \| \| \| \| \| \|	Conflicts: host/lib/usrp/usrp2/usrp2_regs.cpp
\| *	USRP2/N210: firmware UART read no longer drops 20th char	Nick Foster	2011-04-29	1	-6/+8
\| \|
\| *	N210: Additional checks on both the host and firmware sides of the firmware ↵	Nick Foster	2011-04-21	1	-1/+9
\| \| \| \| \| \| \| \|	updater.
* \|	N210 fw: Move spif_init into bootload_utils	Nick Foster	2011-04-22	2	-1/+4
\| \|
* \|	N210: Minor rearranging of bootloader impl in txrx	Nick Foster	2011-04-22	1	-5/+6
\| \|
* \|	N210: TXRX_UHD now has bootloader #ifdef'ed into it. Safe firmware now ↵	Nick Foster	2011-04-22	14	-664/+74
\| \| \| \| \| \| \| \| \| \| \| \|	embedded into FPGA bootloader. Also did some cleanup of unused source files and consolidated bootloader stuff into bootloader_utils.
* \|	N210: Moved u2p_init into main app and changed bootloader behavior to not ↵	Nick Foster	2011-04-21	4	-26/+23
\| \| \| \| \| \| \| \|	load safe fw if safe mode button pressed
* \|	N210: UDP bootloader	Nick Foster	2011-04-21	1	-2/+3
\| \|