uhd - Ettus' UHD Repository

	Commit message (Collapse)	Author	Age	Files	Lines
*	packet_router: take that back and only garp when link is up (FIXME initial ↵	Josh Blum	2010-12-11	1	-1/+1
\| \| \| \|	state before garp call)
*	packet_router: enable the serdes and always send GARP	Josh Blum	2010-12-11	2	-2/+4
\|
*	packet_router: filter on dest ip addr and bcast mac addr	Josh Blum	2010-12-11	1	-6/+10
\|
*	usrp2: implement routing mode calls, and prefix pkt ctrl calls	Josh Blum	2010-12-11	4	-16/+41
\|
*	usrp2: remove non-relevant buffer pool things from memory map	Josh Blum	2010-12-11	2	-8/+4
\|
*	usrp2: replaced spi and i2c async stuff with sync (since were out of the ↵	Josh Blum	2010-12-11	6	-94/+22
\| \| \| \|	fast-path)
*	usrp2: removed buffer pool macros and constants from memory map	Josh Blum	2010-12-11	2	-216/+0
\|
*	usrp2: implemented packet ctrl to read and write slow path packets from the ↵	Josh Blum	2010-12-11	5	-96/+119
\| \| \| \|	new interface
*	usrp2: pretty much gutted the buffer pool stuff with other misc changes, not ↵	Josh Blum	2010-12-11	17	-1245/+38
\| \| \| \|	in working shape
*	Merge branch 'flow_ctrl' into next	Josh Blum	2010-11-23	6	-5/+22
\|\
\| *	Firmware mem map changes for flow ctrl somehow didn't get propagated.	Nick Foster	2010-11-18	3	-2/+7
\| \| \| \| \| \| \| \|	Also removed firmware update fw rev checking -- it occurs to me that checking fw rev in order to update fw is counterproductive.
\| *	Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into flow_ctrl	Nick Foster	2010-11-17	59	-260/+5868
\| \|\ \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Conflicts: host/lib/transport/udp_simple.cpp host/lib/usrp/usrp2/mboard_impl.cpp host/lib/usrp/usrp2/usrp2_iface.cpp host/lib/usrp/usrp2/usrp2_regs.hpp
\| * \|	usrp2: implemented clear state for RX and TX control, and zero sample ↵	Josh Blum	2010-11-08	1	-1/+1
\| \| \| \| \| \| \| \| \| \| \| \|	command support
\| * \|	Merge branch 'master' into flow_ctrl	Josh Blum	2010-11-05	119	-4080/+534
\| \|\ \ \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Conflicts: host/lib/usrp/usrp2/mboard_impl.cpp host/lib/usrp/usrp2/usrp2_impl.hpp
\| * \ \	Merge branch 'garp' into flow_ctrl	Josh Blum	2010-10-22	6	-102/+145
\| \|\ \ \
\| * \ \ \	Merge branch 'usrp2_overflow' into flow_ctrl	Josh Blum	2010-10-21	1	-1/+1
\| \|\ \ \ \ \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Conflicts: host/lib/usrp/usrp2/usrp2_impl.hpp
\| * \| \| \| \|	usrp2: handle destination port unreachable icmp in fw (kills streaming and ↵	Josh Blum	2010-10-13	2	-1/+13
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	update packets)
\| * \| \| \| \|	usrp2: register overflow, underflow, and pps level for pic	Josh Blum	2010-10-12	2	-2/+3
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	also fix minor build issue w/ LDADD
\| * \| \| \| \|	usrp2: implemented flow control monitor	Josh Blum	2010-10-11	1	-1/+1
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	set registers in mboard impl to enable asyn fc packets modified microblaze code to handle dummy data packet offset
* \| \| \| \| \|	N200 comes up with default IP and MAC when booted in safe mode (button pushed).	Nick Foster	2010-11-22	7	-21/+59
\| \|_\|_\|_\|/ \|/\| \| \| \|
* \| \| \| \|	U2P: Ripped out the mboard_rev_t structure in favor of an enum in ↵	Nick Foster	2010-11-10	1	-2/+2
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	usrp2_regs.hpp and some logic. Also change ethernet.c to move generic code to eth_lib.
* \| \| \| \|	Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p-next	Nick Foster	2010-11-10	125	-4173/+682
\|\ \ \ \ \ \| \| \|_\|_\|/ \| \|/\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Conflicts: firmware/microblaze/lib/u2_init.c host/lib/usrp/usrp2/clock_ctrl.cpp host/lib/usrp/usrp2/fw_common.h host/lib/usrp/usrp2/mboard_impl.cpp host/lib/usrp/usrp2/usrp2_iface.cpp host/lib/usrp/usrp2/usrp2_iface.hpp
\| * \| \| \|	uhd: rename identifier for usrp1 eeprom, and fix offsets, add serial support ↵	Josh Blum	2010-11-05	1	-1/+1
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	to usrp2
\| * \| \| \|	Merge branch 'good_stuff' into mb_eeprom	Josh Blum	2010-11-05	116	-4066/+528
\| \|\ \ \ \ \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Conflicts: firmware/fx2/include
\| \| * \| \| \|	usrp1: pulled in cmake build system for usrp1 firmware	Josh Blum	2010-11-05	117	-4066/+529
\| \| \| \| \| \|
\| * \| \| \| \|	usrp2: move mboard eeprom instance into iface to the clock control can access it	Josh Blum	2010-11-04	1	-0/+6
\| \| \| \| \| \|
\| * \| \| \| \|	Merge branch 'good_stuff' into mb_eeprom	Josh Blum	2010-11-04	7	-104/+148
\| \|\\| \| \| \|
\| \| * \| \| \|	Merge branch 'ovfl' into good_stuff	Josh Blum	2010-11-04	1	-1/+1
\| \| \|\ \ \ \ \| \| \| \| \|/ / \| \| \| \|/\| / \| \| \| \|_\|/ \| \| \|/\| \|
\| \| \| * \|	usrp2: handle real overflow packets in host, reload continuous stream cmd, ↵	Josh Blum	2010-10-21	1	-1/+1
\| \| \| \|/ \| \| \| \| \| \| \| \| \| \| \| \|	remove firmware handling
\| \| * /	usrp2: fw sends gratuitous arp on link-up	Josh Blum	2010-10-22	7	-103/+147
\| \| \|/
\| * /	usrp2: implemented mboard eeprom into usrp2 mboard	Josh Blum	2010-11-04	2	-14/+0
\| \|/
* \|	USRP2P: mboard rev works through props interface.	Nick Foster	2010-10-12	1	-2/+2
\| \| \| \| \| \| \| \| \| \| \| \|	Added usrp2_burn_mb_rev.cpp to utils. It is not installed to the utils install dir. Not all happy with the mboard_rev setup -- is_usrp2p() is too specific for a generalized mboard_rev concept. I'm not sure where else to put it so for now it stays.
* \|	USRP2P: This is surprisingly involved. Adding a consistent interface to deal ↵	Nick Foster	2010-10-12	2	-2/+4
\| \| \| \| \| \| \| \|	with hardware revisions.
* \|	USRP2P: Little bit of commonality in the include files. No functional change.	Nick Foster	2010-10-08	1	-4/+2
\| \|
* \|	U2P: Bootloader works, successfully loads production image.	Nick Foster	2010-10-08	9	-202/+268
\| \| \| \| \| \| \| \|	Split I2C into async and sync halves to keep the size of the bootloader small.
* \|	U2P: Whoops.	Nick Foster	2010-10-07	1	-1/+1
\| \|
* \|	U2P: Bootloader/ICAP updates. 2-stage bootloader works. Uses EEPROM for ↵	Nick Foster	2010-10-07	6	-61/+91
\| \| \| \| \| \| \| \|	state info.
* \|	U2P: 32/64Mbit FLASH support, internal reference support for U2P r2	Nick Foster	2010-10-05	1	-4/+5
\| \|
* \|	Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p	Nick Foster	2010-09-15	107	-0/+11434
\|\\| \| \| \| \| \| \| \| \| \| \| \| \|	Conflicts: host/lib/usrp/usrp2/CMakeLists.txt host/lib/usrp/usrp2/mboard_impl.cpp host/lib/usrp/usrp2/usrp2_regs.hpp
\| *	EEPROM burning in UHD. Changed some USB device handle stuff. Added ↵	Nick Foster	2010-08-31	2	-133/+28
\| \| \| \| \| \| \| \|	usrp_init_eeprom.cpp. Hacked up the firmware makefile to behave and to generate .bin EEPROM images instead of IHX.
\| *	usrp1: images for usrp1, makefile checks for image generation dependencies	Josh Blum	2010-08-19	1	-0/+5
\| \|
\| *	Merge branch 'master' into usrp1	Josh Blum	2010-08-17	7	-29/+326
\| \|\
\| * \|	usrp1: Add SPI transaction command to FX2 firmware	Thomas Tsou	2010-08-13	4	-3/+116
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	The existing SPI read command is set for half-duplex 8-bit or 16-bit writes followed by an equivalent sized read. This patch adds a new command, VRQ_SPI_TRANSACT, which performs a full-duplex transaction up to 4-bytes. Since the data buffer of the USB control transfer is not available for outbound data on IN requests, the 4 bytes of write data are sent through the request parameters. Enables are sent in the previsouly unused high byte of the length parameter. The USB field mappings are shown below. Only rising edge and MSB operation is supported. Field (8-bit) Description ===== ===== bmRequestType 0x80 (USB Device IN request) bRequest 0x83 (VRQ_SPI_TRANSACT) wValueH OUT data(0) wValueL OUT data(1) wIndexH OUT data(2) wIndexL OUT data(3) wLengthH SPI enables wLengthL Number of bytes to transfer (1-4) EP0BUF IN data
\| * \|	usrp1: Add FX2 firmware files	Thomas Tsou	2010-08-13	107	-0/+11421
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	These firmware files for the usrp1 are imported from GNURadio.
* \| \|	Change to get codec_impl to compile, dur.	Nick Foster	2010-08-25	1	-2/+2
\| \| \| \| \| \| \| \| \| \| \| \|	Changed memory map to correspond to new tx_policy code.
* \| \|	Merge branch 'usrp2p_udpfw' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p	Nick Foster	2010-08-18	12	-411/+230
\|\ \ \
\| * \| \|	Moved UDP firmware update stuff out of fw_common.h into udp_fw_update.h.	Nick Foster	2010-08-18	7	-64/+86
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	This stuff should only go back into fw_common.h if we decide to integrate firmware update into the UHD code. Right now it's a separate Python script. Also moved udp_fw_update.h to lib/ because it's the same between USRP2 and USRP2P.
\| * \| \|	UDP firmware update support for USRP2P.	Nick Foster	2010-08-17	10	-372/+169
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	The hooks are in there for USRP2, but without CPLD changes it won't support it. Added an app host/utils/usrp2p_fw_update.py to write to USRP2P over the wire. Lots of TODOs in that file. Caveat -- fw_common.h, bootloader_utils.h, and the .py app MUST ALL AGREE!
* \| \| \|	Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p	Nick Foster	2010-08-18	7	-29/+326
\|\ \ \ \ \| \|/ / / \|/\| \| / \| \| \|/ \| \|/\|
\| * \|	usrp2: don't forward dbsm errors	Nick Foster	2010-08-16	1	-4/+4
\| \| \|