summaryrefslogtreecommitdiffstats
path: root/firmware/microblaze
Commit message (Expand)AuthorAgeFilesLines
...
* | Ethernet PHY re-do.Nick Foster2010-07-278-12/+603
* | Deleted manually those files to correspond with USRP2P branch.Nick Foster2010-07-2661-8673/+0
* | New branch with firmware dir from USRP2P branch.Nick Foster2010-07-26112-45/+13382
|/
* usrp2: installed a simple dbsm_rx_inspector, it wont work without it...Josh Blum2010-07-161-4/+7
* usrp2: remove mb intervention on outgoing packetsJosh Blum2010-07-151-28/+6
* usrp2: forward errors in the dbsm to communicate them up to the hostJosh Blum2010-07-121-2/+4
* usrp2: Added a peek64 to read pairs of 32 bit numbers such as time64Josh Blum2010-07-051-0/+8
* usrp2: increased transport buffer minimum size, and added warningJosh Blum2010-07-051-4/+4
* usrp2 mb: replace hard coded constants with macros for rx offsetJosh Blum2010-06-181-2/+2
* Moved usrp2 eeprom addr read/write to host control over i2c/eeprom interface ...Josh Blum2010-05-111-20/+3
* Added a place for serdes control on the host.Josh Blum2010-05-102-20/+20
* Merge branch 'shrinkfw' into usrp2Josh Blum2010-05-1010-467/+4
|\
| * Moved some misc setting registers into host.Josh Blum2010-04-281-10/+0
| * removed some unused things like gpio from microblaze codeJosh Blum2010-04-287-312/+4
| * Added reload flag to the stream cmd.Josh Blum2010-04-285-147/+2
* | added icmp echo reply to usrp2Josh Blum2010-05-031-1/+18
|/
* Merge branch 'eeprom' of git@ettus.sourcerepo.com:ettus/uhdprivJosh Blum2010-04-265-127/+0
|\
| * Moved reading the eeprom (dboard ids) onto the host.Josh Blum2010-04-235-127/+0
* | renamed the firmware main image to txrx_uhd.binJosh Blum2010-04-252-2/+2
|/
* toggle led a for continuous streamingJosh Blum2010-04-221-0/+6
* Added protocol version number to usrp2 common header and data struct.Josh Blum2010-04-211-5/+29
* pulled aux dac and adc support from microblaze, its in the host nowJosh Blum2010-04-197-280/+0
* removed unused firmware codeJosh Blum2010-04-133-370/+0
* Moved ad9777 control 100% on to the hostJosh Blum2010-04-135-168/+0
* Reworked the spi part of the dboard interface.Josh Blum2010-04-071-18/+7
* added 16 bit peek and poke, 16 bit register defs for gpios and atrsJosh Blum2010-04-051-3/+27
* extended stream cmd with mode enum, and extended fragment flags in metadataJosh Blum2010-04-031-2/+2
* added spi slaves to regs, use std copy for buffsJosh Blum2010-03-311-1/+1
* Moved dsp (rx and tx), time config, and clock config (mostly) into the host.Josh Blum2010-03-311-116/+0
* Refactor ATR part of dboard interface (and some constants).Josh Blum2010-03-311-49/+24
* removed that fw sets seq stuff, not applicableJosh Blum2010-03-261-16/+1
* insert correct control word and vrt len into the bufferJosh Blum2010-03-261-19/+15
* Overhaullllllled the way we do streaming. There is an odd bug whereJosh Blum2010-03-252-81/+96
* added easy way to compile firmware for debug modeJosh Blum2010-03-241-7/+9
* Added recovery app to use raw socket to burn known ip addr.Josh Blum2010-03-164-36/+32
* Added ability to set the subdevices in use for rx and tx dboards.Josh Blum2010-03-162-4/+11
* Ability to burn mac addr and ip addr to usrp2 (over ip/udp for now).Josh Blum2010-03-154-36/+96
* Added simple device to handle wrapping general properties up into simple api.Josh Blum2010-03-101-0/+10
* Moved timeouts into the udp transports.Josh Blum2010-03-043-18/+11
* The net common is too slow in usrp2 firmware to figure out if its vrt data.Josh Blum2010-03-023-12/+28
* Send the number of samples per datagram over the control.Josh Blum2010-03-011-29/+16
* Recv noise with uhd.Josh Blum2010-03-011-0/+3
* Put fast path code (rx setup) back into txrx.c.Josh Blum2010-02-231-29/+59
* Work on the io interface for a device (and some implementation work in usrp2).Josh Blum2010-02-222-2/+5
* DDC enable with stream at control OTWJosh Blum2010-02-191-3/+19
* DUC and DDC control packets OTWJosh Blum2010-02-191-0/+55
* Added control for usrp2 aux dac and adc control.Josh Blum2010-02-171-0/+39
* Added i2c control transactions in fw and hostJosh Blum2010-02-171-0/+28
* Worked out spi api for the dboard interface.Josh Blum2010-02-171-1/+32
* moved host code into host directory for clean (unambiguous) top levelJosh Blum2010-02-171-1/+1
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 21:48:21 +0000