summaryrefslogtreecommitdiffstats
path: root/firmware/microblaze/lib
Commit message (Expand)AuthorAgeFilesLines
...
| * usrp2: reorganized firmware directoryJosh Blum2010-07-3027-1901/+401
* | Finished GPS driver, more or less.Nick Foster2010-08-162-9/+10
* | Fixed behavior when no GPS present.Nick Foster2010-08-132-4/+3
* | Small fix for fngetsNick Foster2010-08-131-2/+2
* | Increased UART timeout for slow Jackson Labs GPSDO. Fixed up timeout code.Nick Foster2010-08-133-2/+3
* | Added timeout functionality for UART gets() calls. use fngets_timeout(). time...Nick Foster2010-08-134-0/+28
* | first stab at a GPS driver in gps_ctrl.cpp. not the most expandable thing in ...Nick Foster2010-08-132-0/+8
* | Fixed GPS UART stuff. Works OK.Nick Foster2010-08-122-5/+3
* | Added UART transactions to the DUDE/BRO protocol.Nick Foster2010-08-123-1/+24
* | Working support for multiple UARTs.Nick Foster2010-08-124-79/+120
* | Branch to make use of quad UART on USRP2P.Nick Foster2010-08-113-24/+46
* | Clock bugs, LED order.Nick Foster2010-07-293-12/+18
* | Added back in clock_mimo_enable stuff since USRP2 breaks without it.Nick Foster2010-07-282-8/+8
* | Stripped out all the clock functionality except for init'ing the FPGA. Clock ...Nick Foster2010-07-283-4/+266
* | Widened SPI slave select bus to 16 bits in host and firmware.Nick Foster2010-07-281-1/+1
* | Ethernet mods for activity LED.Nick Foster2010-07-272-2/+2
* | Ethernet PHY re-do.Nick Foster2010-07-274-617/+0
* | Deleted manually those files to correspond with USRP2P branch.Nick Foster2010-07-266-1477/+0
* | New branch with firmware dir from USRP2P branch.Nick Foster2010-07-2627-18/+1581
|/
* usrp2: forward errors in the dbsm to communicate them up to the hostJosh Blum2010-07-121-2/+4
* Added a place for serdes control on the host.Josh Blum2010-05-102-20/+20
* Merge branch 'shrinkfw' into usrp2Josh Blum2010-05-109-322/+4
|\
| * Moved some misc setting registers into host.Josh Blum2010-04-281-10/+0
| * removed some unused things like gpio from microblaze codeJosh Blum2010-04-286-287/+4
| * Added reload flag to the stream cmd.Josh Blum2010-04-284-27/+2
* | added icmp echo reply to usrp2Josh Blum2010-05-031-1/+18
|/
* Moved reading the eeprom (dboard ids) onto the host.Josh Blum2010-04-234-111/+0
* pulled aux dac and adc support from microblaze, its in the host nowJosh Blum2010-04-196-241/+0
* removed unused firmware codeJosh Blum2010-04-133-370/+0
* Moved ad9777 control 100% on to the hostJosh Blum2010-04-135-168/+0
* Overhaullllllled the way we do streaming. There is an odd bug whereJosh Blum2010-03-251-1/+2
* Added recovery app to use raw socket to burn known ip addr.Josh Blum2010-03-163-25/+13
* Added ability to set the subdevices in use for rx and tx dboards.Josh Blum2010-03-161-2/+2
* Ability to burn mac addr and ip addr to usrp2 (over ip/udp for now).Josh Blum2010-03-152-17/+70
* Moved timeouts into the udp transports.Josh Blum2010-03-042-13/+0
* The net common is too slow in usrp2 firmware to figure out if its vrt data.Josh Blum2010-03-022-0/+12
* Added control code in the txrx.c and dboard interface for usrp2 to handle gpi...Josh Blum2010-02-162-6/+9
* Restored microblaze build (accidentally removed makefile ams and gitignores w...Josh Blum2010-02-162-0/+137
* Removed Autotools stuff and the git ignore files.Josh Blum2010-02-152-137/+0
* Reading the dboard ids from the usrp2.Josh Blum2010-02-122-1/+2
* Getting hello packets from the usrp2 with ip and mac addrs.Josh Blum2010-02-112-166/+2
* net_common working in this state with control udp packetsJosh Blum2010-02-1011-4/+952
* removed dboard filesJosh Blum2010-02-108-2044/+22
* Copied a snapshot of the usrp2 firmware into the microblaze firmware director...Josh Blum2010-02-1072-0/+8949
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 11:04:56 +0000