uhd - Ettus' UHD Repository

	Commit message (Expand)	Author	Age	Files	Lines
*	Fixed behavior when no GPS present.	Nick Foster	2010-08-13	2	-4/+3
*	Small fix for fngets	Nick Foster	2010-08-13	1	-2/+2
*	Increased UART timeout for slow Jackson Labs GPSDO. Fixed up timeout code.	Nick Foster	2010-08-13	3	-2/+3
*	Added timeout functionality for UART gets() calls. use fngets_timeout(). time...	Nick Foster	2010-08-13	4	-0/+28
*	first stab at a GPS driver in gps_ctrl.cpp. not the most expandable thing in ...	Nick Foster	2010-08-13	2	-0/+8
*	Fixed GPS UART stuff. Works OK.	Nick Foster	2010-08-12	2	-5/+3
*	Added UART transactions to the DUDE/BRO protocol.	Nick Foster	2010-08-12	3	-1/+24
*	Working support for multiple UARTs.	Nick Foster	2010-08-12	4	-79/+120
*	Branch to make use of quad UART on USRP2P.	Nick Foster	2010-08-11	3	-24/+46
*	Clock bugs, LED order.	Nick Foster	2010-07-29	3	-12/+18
*	Added back in clock_mimo_enable stuff since USRP2 breaks without it.	Nick Foster	2010-07-28	2	-8/+8
*	Stripped out all the clock functionality except for init'ing the FPGA. Clock ...	Nick Foster	2010-07-28	3	-4/+266
*	Widened SPI slave select bus to 16 bits in host and firmware.	Nick Foster	2010-07-28	1	-1/+1
*	Ethernet mods for activity LED.	Nick Foster	2010-07-27	2	-2/+2
*	Ethernet PHY re-do.	Nick Foster	2010-07-27	4	-617/+0
*	Deleted manually those files to correspond with USRP2P branch.	Nick Foster	2010-07-26	6	-1477/+0
*	New branch with firmware dir from USRP2P branch.	Nick Foster	2010-07-26	27	-18/+1581
*	usrp2: forward errors in the dbsm to communicate them up to the host	Josh Blum	2010-07-12	1	-2/+4
*	Added a place for serdes control on the host.	Josh Blum	2010-05-10	2	-20/+20
*	Merge branch 'shrinkfw' into usrp2	Josh Blum	2010-05-10	9	-322/+4
\|\
\| *	Moved some misc setting registers into host.	Josh Blum	2010-04-28	1	-10/+0
\| *	removed some unused things like gpio from microblaze code	Josh Blum	2010-04-28	6	-287/+4
\| *	Added reload flag to the stream cmd.	Josh Blum	2010-04-28	4	-27/+2
* \|	added icmp echo reply to usrp2	Josh Blum	2010-05-03	1	-1/+18
\|/
*	Moved reading the eeprom (dboard ids) onto the host.	Josh Blum	2010-04-23	4	-111/+0
*	pulled aux dac and adc support from microblaze, its in the host now	Josh Blum	2010-04-19	6	-241/+0
*	removed unused firmware code	Josh Blum	2010-04-13	3	-370/+0
*	Moved ad9777 control 100% on to the host	Josh Blum	2010-04-13	5	-168/+0
*	Overhaullllllled the way we do streaming. There is an odd bug where	Josh Blum	2010-03-25	1	-1/+2
*	Added recovery app to use raw socket to burn known ip addr.	Josh Blum	2010-03-16	3	-25/+13
*	Added ability to set the subdevices in use for rx and tx dboards.	Josh Blum	2010-03-16	1	-2/+2
*	Ability to burn mac addr and ip addr to usrp2 (over ip/udp for now).	Josh Blum	2010-03-15	2	-17/+70
*	Moved timeouts into the udp transports.	Josh Blum	2010-03-04	2	-13/+0
*	The net common is too slow in usrp2 firmware to figure out if its vrt data.	Josh Blum	2010-03-02	2	-0/+12
*	Added control code in the txrx.c and dboard interface for usrp2 to handle gpi...	Josh Blum	2010-02-16	2	-6/+9
*	Restored microblaze build (accidentally removed makefile ams and gitignores w...	Josh Blum	2010-02-16	2	-0/+137
*	Removed Autotools stuff and the git ignore files.	Josh Blum	2010-02-15	2	-137/+0
*	Reading the dboard ids from the usrp2.	Josh Blum	2010-02-12	2	-1/+2
*	Getting hello packets from the usrp2 with ip and mac addrs.	Josh Blum	2010-02-11	2	-166/+2
*	net_common working in this state with control udp packets	Josh Blum	2010-02-10	11	-4/+952
*	removed dboard files	Josh Blum	2010-02-10	8	-2044/+22
*	Copied a snapshot of the usrp2 firmware into the microblaze firmware director...	Josh Blum	2010-02-10	72	-0/+8949