aboutsummaryrefslogtreecommitdiffstats
path: root/firmware/microblaze/apps/txrx_uhd.c
Commit message (Collapse)AuthorAgeFilesLines
* packet_router: reject icmp dest unreachable when port does not matchJosh Blum2010-12-131-1/+1
|
* packet_router: added control register to set the udp control portJosh Blum2010-12-111-1/+1
|
* packet_router: added sregs for ip addr and portsJosh Blum2010-12-111-1/+1
| | | | | | | | the pkt control now programs the inspector with port and ip addr set the eth mac to pass all unicast added easy debug flag to net common
* packet_router: dont register mac, also reorganized some tidbitsJosh Blum2010-12-111-1/+1
|
* packet_router: implemented code to program the addresses into the routerJosh Blum2010-12-111-3/+3
|
* packet_router: added helper functions to packet router, added clear, fixed ↵Josh Blum2010-12-111-1/+5
| | | | handshake, garp at start
* packet_router: take that back and only garp when link is up (FIXME initial ↵Josh Blum2010-12-111-1/+1
| | | | state before garp call)
* packet_router: enable the serdes and always send GARPJosh Blum2010-12-111-1/+1
|
* usrp2: implement routing mode calls, and prefix pkt ctrl callsJosh Blum2010-12-111-6/+12
|
* usrp2: replaced spi and i2c async stuff with sync (since were out of the ↵Josh Blum2010-12-111-82/+13
| | | | fast-path)
* usrp2: implemented packet ctrl to read and write slow path packets from the ↵Josh Blum2010-12-111-71/+12
| | | | new interface
* usrp2: pretty much gutted the buffer pool stuff with other misc changes, not ↵Josh Blum2010-12-111-96/+15
| | | | in working shape
* Merge branch 'flow_ctrl' into nextJosh Blum2010-11-231-1/+1
|\
| * Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into flow_ctrlNick Foster2010-11-171-0/+25
| |\ | | | | | | | | | | | | | | | | | | | | | Conflicts: host/lib/transport/udp_simple.cpp host/lib/usrp/usrp2/mboard_impl.cpp host/lib/usrp/usrp2/usrp2_iface.cpp host/lib/usrp/usrp2/usrp2_regs.hpp
| * \ Merge branch 'garp' into flow_ctrlJosh Blum2010-10-221-3/+7
| |\ \
| * \ \ Merge branch 'usrp2_overflow' into flow_ctrlJosh Blum2010-10-211-1/+1
| |\ \ \ | | | | | | | | | | | | | | | | | | | | Conflicts: host/lib/usrp/usrp2/usrp2_impl.hpp
| * | | | usrp2: implemented flow control monitorJosh Blum2010-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | set registers in mboard impl to enable asyn fc packets modified microblaze code to handle dummy data packet offset
* | | | | N200 comes up with default IP and MAC when booted in safe mode (button pushed).Nick Foster2010-11-221-1/+11
| |_|_|/ |/| | |
* | | | Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2p-nextNick Foster2010-11-101-4/+8
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: firmware/microblaze/lib/u2_init.c host/lib/usrp/usrp2/clock_ctrl.cpp host/lib/usrp/usrp2/fw_common.h host/lib/usrp/usrp2/mboard_impl.cpp host/lib/usrp/usrp2/usrp2_iface.cpp host/lib/usrp/usrp2/usrp2_iface.hpp
| * \ \ \ Merge branch 'ovfl' into good_stuffJosh Blum2010-11-041-1/+1
| |\ \ \ \ | | | |/ / | | |/| / | | |_|/ | |/| |
| | * | usrp2: handle real overflow packets in host, reload continuous stream cmd, ↵Josh Blum2010-10-211-1/+1
| | |/ | | | | | | | | | remove firmware handling
| * / usrp2: fw sends gratuitous arp on link-upJosh Blum2010-10-221-3/+7
| |/
* | U2P: Bootloader works, successfully loads production image.Nick Foster2010-10-081-0/+1
| | | | | | | | Split I2C into async and sync halves to keep the size of the bootloader small.
* | Merge branch 'usrp2p_udpfw' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2pNick Foster2010-08-181-0/+2
|\ \
| * | UDP firmware update support for USRP2P.Nick Foster2010-08-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The hooks are in there for USRP2, but without CPLD changes it won't support it. Added an app host/utils/usrp2p_fw_update.py to write to USRP2P over the wire. Lots of TODOs in that file. Caveat -- fw_common.h, bootloader_utils.h, and the .py app MUST ALL AGREE!
* | | Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp2pNick Foster2010-08-181-15/+61
|\ \ \ | |/ / |/| / | |/
| * IRQ-based SPI works. Don't try to do multiple transactions without waiting ↵Nick Foster2010-08-161-5/+2
| | | | | | | | | | | | for results first. In fact, don't try to do an I2C transaction while an SPI transaction is pending.
| * syntaxNick Foster2010-08-161-2/+2
| |
| * first stab at irq'ed spiNick Foster2010-08-161-6/+24
| |
| * Bring in changes since last week.Nick Foster2010-08-101-18/+10
| |
| * Interrupt-driven I2C. txrx_uhd uses async i2c for comms.Nick Foster2010-08-101-14/+53
| |
* | Added timeout functionality for UART gets() calls. use fngets_timeout(). ↵Nick Foster2010-08-131-1/+1
| | | | | | | | timeout defined in hal_uart.h.
* | first stab at a GPS driver in gps_ctrl.cpp. not the most expandable thing in ↵Nick Foster2010-08-131-0/+3
| | | | | | | | the world but there's only so many GPS interfaces out there.
* | Fixed GPS UART stuff. Works OK.Nick Foster2010-08-121-2/+2
| |
* | Added UART transactions to the DUDE/BRO protocol.Nick Foster2010-08-121-0/+19
|/
* usrp2: added fpga compat number, renamed firmware proto version to compatJosh Blum2010-08-091-5/+6
|
* usrp2: reorganized firmware directoryJosh Blum2010-07-301-2/+1
|
* usrp2: added tx policy register and changed fw to not handle error in buffer ↵Josh Blum2010-07-291-1/+1
| | | | pool
* usrp2: installed a simple dbsm_rx_inspector, it wont work without it...Josh Blum2010-07-161-4/+7
|
* usrp2: remove mb intervention on outgoing packetsJosh Blum2010-07-151-28/+6
|
* usrp2: Added a peek64 to read pairs of 32 bit numbers such as time64Josh Blum2010-07-051-0/+8
| | | | also added a templated host to/from network conversion in byteswap.hpp (didnt use it though)
* usrp2: increased transport buffer minimum size, and added warningJosh Blum2010-07-051-4/+4
| | | | | | added more notes on buffer size to the manual pulled in some firmware fixes from the mimo work, just to have them in here
* usrp2 mb: replace hard coded constants with macros for rx offsetJosh Blum2010-06-181-2/+2
|
* Moved usrp2 eeprom addr read/write to host control over i2c/eeprom interface ↵Josh Blum2010-05-111-20/+3
| | | | | | | | | | calls. No longer part of the dude/bro protocol. Simplified the mac and ip addr read write code in mboard impl. Modified the mac addr type to take byte_vector_t from serial.hpp types.
* removed some unused things like gpio from microblaze codeJosh Blum2010-04-281-25/+0
|
* Added reload flag to the stream cmd.Josh Blum2010-04-281-120/+0
| | | | | This reloads the last command to handle continuous streaming in hardware. Moved rx control register setup and stream command issuing to the host.
* Merge branch 'eeprom' of git@ettus.sourcerepo.com:ettus/uhdprivJosh Blum2010-04-261-16/+0
|
* renamed the firmware main image to txrx_uhd.binJosh Blum2010-04-251-0/+691
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 17:49:38 +0000