aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* usrp1: Cmake changes to find libusb-1.0Josh Blum2010-08-132-0/+53
| | | | | FindUSB1.cmake file imported from the libFTDI project, http://www.intra2net.com/en/developer/libftdi
* usrp1: Add libusb-1.0 implementations of USB interfacesThomas Tsou2010-08-132-0/+1092
|
* usrp1: Add USB transport interfacesThomas Tsou2010-08-135-0/+192
| | | | | | | | | This patch adds generic interfaces for control and zero-copy transport of data between the host and a slave device. The interfaces are separate and generic to accommodate multiple implementations that may include cross platform libraries such as libusb or a platform specific implementation such as Linux usbfs.
* usrp1: Add SPI transaction command to FX2 firmwareThomas Tsou2010-08-134-3/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | The existing SPI read command is set for half-duplex 8-bit or 16-bit writes followed by an equivalent sized read. This patch adds a new command, VRQ_SPI_TRANSACT, which performs a full-duplex transaction up to 4-bytes. Since the data buffer of the USB control transfer is not available for outbound data on IN requests, the 4 bytes of write data are sent through the request parameters. Enables are sent in the previsouly unused high byte of the length parameter. The USB field mappings are shown below. Only rising edge and MSB operation is supported. Field (8-bit) Description ===== ===== bmRequestType 0x80 (USB Device IN request) bRequest 0x83 (VRQ_SPI_TRANSACT) wValueH OUT data(0) wValueL OUT data(1) wIndexH OUT data(2) wIndexL OUT data(3) wLengthH SPI enables wLengthL Number of bytes to transfer (1-4) EP0BUF IN data
* usrp1: Add FX2 firmware filesThomas Tsou2010-08-13107-0/+11421
| | | | | These firmware files for the usrp1 are imported from GNURadio.
* uhd: created floor_step to handle floating-point errors in gain groupJosh Blum2010-08-121-6/+25
|
* uhd: avoid segfaults - use CPP macros for paths and dont split empty stringJosh Blum2010-08-112-9/+10
|
* Merge branch 'changes'Josh Blum2010-08-1113-31/+216
|\
| * uhd-images: do not require language check for images projectJosh Blum2010-08-101-1/+1
| |
| * usrp2: work on card burner to pad the image file before a writeJosh Blum2010-08-102-12/+32
| |
| * usrp2: added fpga compat number, renamed firmware proto version to compatJosh Blum2010-08-095-16/+28
| |
| * Merge branch 'uhd_fpga_features'Josh Blum2010-08-092-3/+6
| |\
| | * Merge branch 'features' into uhd_fpga_featuresJosh Blum2010-08-092-3/+6
| | |\
| | | * added compat number to usrp2 readback muxJosh Blum2010-08-091-2/+5
| | | |
| | | * makefile dependency fix for second expansionJosh Blum2010-08-091-1/+1
| | | |
| * | | Merge branch 'images'Josh Blum2010-08-094-0/+150
| |\ \ \ | | |/ / | |/| |
| | * | uhd-images: created makefile and cmake packager for the imagesJosh Blum2010-08-064-0/+150
| | | |
* | | | usrp: needed default constructor for MSVC, fixed gain group float warningsJosh Blum2010-08-112-3/+4
|/ / /
* | | Merge branch 'features' into uhd_fpga_featuresJosh Blum2010-08-0923-5878/+873
|\ \ \ | | |/ | |/| | | | | | | Conflicts: fpga/usrp2/vrt/vita_rx_control.v
| * | provide a way to get out of the error state without processor interventionMatt Ettus2010-07-291-1/+4
| | |
| * | sequence number reset upon programming streamidMatt Ettus2010-07-282-5/+11
| | |
| * | attempt at avoiding infinite error messagesMatt Ettus2010-07-281-5/+14
| | |
| * | implemented "next packet" and "next burst" policiesMatt Ettus2010-07-283-24/+50
| | |
| * | sequence errors can happen on start of burst as well.Matt Ettus2010-07-281-1/+1
| | |
| * | more informative error codesMatt Ettus2010-07-282-6/+8
| | |
| * | cleaner error handlingMatt Ettus2010-07-281-27/+28
| | |
| * | introduce new error typesMatt Ettus2010-07-283-34/+80
| | |
| * | test mux and gen_context_pktMatt Ettus2010-07-281-3/+22
| | |
| * | this is an output file, it shouldn't be checked inMatt Ettus2010-07-281-5506/+0
| | |
| * | insert protocol engine flags when requestedMatt Ettus2010-07-281-2/+6
| | |
| * | move the streamid so it isn't at the same address as clear_stateMatt Ettus2010-07-282-2/+2
| | |
| * | connect the demuxMatt Ettus2010-07-281-1/+1
| | |
| * | fix a typoMatt Ettus2010-07-283-4/+4
| | |
| * | tx error packets now muxed into the ethernet stream back to the hostMatt Ettus2010-07-284-47/+66
| | |
| * | checkpoint. New context packet generator to report underruns and other errorsMatt Ettus2010-07-282-0/+107
| | |
| * | move declaration ahead of useMatt Ettus2010-07-191-5/+5
| | |
| * | put run_tx and run_rx on the displayed LEDsMatt Ettus2010-07-191-3/+4
| | |
| * | remove warningsMatt Ettus2010-07-162-3/+3
| | |
| * | add mux and demux to buildMatt Ettus2010-07-151-0/+2
| | |
| * | mux multiple fifo streams into one. Allows priority or round robinMatt Ettus2010-07-151-0/+57
| | |
| * | split fifo into 2 streams based on first line in each packetMatt Ettus2010-07-151-0/+50
| | |
| * | Merge branch 'reload' into ise12Matt Ettus2010-07-154-22/+59
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * reload: fix to stop endless error packets updated tests to match new features error packets are now valid Extension Context packets error packets don't have a trailer any more streamid is now optional on data packets, set by header register trailer now has a bit to indicate successful End-of-burst hard-coded some header bits to correct values to ensure valid packets reload bit for vita rx ctrl
| | * | fix to stop endless error packetsMatt Ettus2010-07-091-2/+2
| | | |
| | * | updated tests to match new featuresMatt Ettus2010-07-092-4/+9
| | | |
| | * | error packets are now valid Extension Context packetsMatt Ettus2010-07-081-11/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | error packets don't have a trailer any more streamid is now optional on data packets, set by header register trailer now has a bit to indicate successful End-of-burst hard-coded some header bits to correct values to ensure valid packets
| | * | reload bit for vita rx ctrlJosh Blum2010-07-051-5/+16
| | | |
| * | | Merge branch 'ise12' of ettus.sourcerepo.com:ettus/fpgapriv into ise12Matt Ettus2010-07-120-0/+0
| |\ \ \ | | | | | | | | | | | | | | | * 'ise12' of ettus.sourcerepo.com:ettus/fpgapriv:
| | * | | Merge branch 'master' into ise12Matt Ettus2010-07-051-4/+5
| | |\| | | | | | | | | | | | | | | | | | | | | | * master: fix bug which caused serdes fifo to disappear
| * | | | Merge branch 'master' into ise12Matt Ettus2010-07-121-4/+5
| |\ \ \ \ | | |/ / / | |/| / / | | |/ / | | | | * master: fix bug which caused serdes fifo to disappear
| * | | Merge branch 'master' into ise12Matt Ettus2010-06-181-1/+2
| |\ \ \ | | | | | | | | | | | | | | | | | | | | * master: proper dependency tracking for the makefile
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 19:26:52 +0000