aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* usrp1: big endian compile fix, conversion should cast to unsignedJosh Blum2012-02-121-2/+2
| | | | The htonx only takes unsigned integers, cast the int16 to uint16.
* windows: do not set process wide priority from thread prioJosh Blum2012-02-081-0/+4
|
* Fixing TX mixer disable, maxing out attenuation when not in use.Ben Hilburn2012-02-072-57/+39
|
* Fixing ADF4351 dividers, even though they won't get used.Ben Hilburn2012-02-071-2/+2
|
* Random formatting while reading through ATR.Ben Hilburn2012-02-071-16/+37
|
* uhd: updated sync docs for current APIJosh Blum2012-02-021-30/+25
|
* uhd: branch-less round for time spec convert to ticksJosh Blum2012-01-311-2/+1
| | | | | | | | | | | This fixes valgrind warnings with branching on unit'd values, and possible exceptions thrown on bad unit'd values. As it turns out, sometimes tick_rate was passed unit'd, however, the value calculated was not of consequence. Also, iround was overkill because we dont need to handle negative tick rates or frac seconds, or bounds checking.
* usrp1/b100: reenumeration loop with timeout only when foundJosh Blum2012-01-272-2/+6
|
* Swap I/Q on transmitJason Abele2012-01-271-1/+1
|
* usrp1/b100: handle longer reenumerations with loop and timeoutJosh Blum2012-01-262-34/+50
|
* uhd: add samples per pkt option to rx streamerJosh Blum2012-01-264-3/+11
|
* usrp2: same change but to fw updaterJosh Blum2012-01-242-11/+3
|
* usrp2: firmware should reset dsp on icmp pktJosh Blum2012-01-242-11/+8
| | | | | | | | 1) This should kill any streaming, the previous calls would just stop continuous streaming 2) The breaks were changed to returns to avoid reprogramming the framer.
* uhd: flush transport for new rx streamersJosh Blum2012-01-236-8/+9
|
* images: include license file into image tarballsJosh Blum2012-01-171-0/+1
|
* usrp1: use fixed bit width integer for hashJosh Blum2012-01-171-14/+17
|
* uhd: patch to support PKG_LIB_DIR per debian fs standardsJosh Blum2012-01-135-8/+11
| | | | | | uhd binaries will continue to install into share/uhd, however, one can specify -DPKG_LIB_DIR=lib/uhd for example to move where the binaries are installed
* uhd: dont populate requires.private in pc fileJosh Blum2012-01-121-9/+0
| | | | | | | | Benefits to having it, it may be technically correct, but isnt needed for the purposes of building. Downsides: makes pkg-config spit errors when private development packages not installed, or pc file not present for other reasons
* Merge branch 'fpga_master'Josh Blum2012-01-111-377/+377
|\
| * n2xx: updated bootloader to latest build in uhd masterJosh Blum2012-01-111-377/+377
| |
* | n2xx: fix burner print if bad revJosh Blum2012-01-111-1/+1
| |
* | usrp: db manager tweak for contructor throwingJosh Blum2012-01-111-2/+2
| |
* | usrp: compensate for other sc8 conversion gainJosh Blum2012-01-091-1/+3
| |
* | usb: updated FindUSB1.cmake for standards complianceJosh Blum2012-01-093-31/+30
| | | | | | | | | | Using cmake's recommended conventions for find scripts. Find script also handles different library name for freebsd.
* | sbx: fix dboard tuning to cache resultJosh Blum2012-01-054-23/+5
| |
* | usrp1: initialize tick_rate prop (fixes readback)Josh Blum2012-01-051-1/+2
| |
* | N210 R4 should be using LVDS TX clock, not CMOS.Nick Foster2012-01-041-4/+17
| |
* | usrp2: fw fix for hal_uart_getc_noblock return codeJosh Blum2012-01-044-6/+8
| |
* | uhd: typo fix in tx waveforms optionsJosh Blum2012-01-031-1/+1
| |
* | uhd: fixes that make uhd compile on freebsdJosh Blum2011-12-302-3/+3
| | | | | | | | | | Fixes gcc version check in byteswap. Fixes typo in thread prio.
* | e100: better error message for eeprom model errorJosh Blum2011-12-311-5/+11
| |
* | uhd: manually link into pthreads hereJosh Blum2011-12-271-0/+1
| |
* | uhd: manually calculate bcast addr, boost version buggyJosh Blum2011-12-221-1/+6
| |
* | Merge branch 'network_foo'Josh Blum2011-12-216-10/+249
|\ \
| * | usrp2: added bind option to the relayJosh Blum2011-12-201-7/+9
| | |
| * | usrp2: more work on relay app and sequence error detectionJosh Blum2011-12-201-14/+45
| | |
| * | usrp2: created network relay example appJosh Blum2011-12-202-0/+195
| | |
| * | usrp2: use the socket to determine the device addrJosh Blum2011-12-204-10/+21
| | |
* | | usrp: added underflow_policy to tx streamer argsJosh Blum2011-12-206-1/+22
|/ /
* | uhd: network device discovery -> calc bcast addr under certain conditionsJosh Blum2011-12-201-0/+6
| |
* | basic: minor fix for copy paste typoJosh Blum2011-12-201-1/+1
| |
* | Make WBX v3+ TX set max attenuation when idleJason Abele2011-12-162-12/+21
| | | | | | | | | | | | | | Because WBX v3+ uses digital step attenuator for TX gain control we can set max attenuation via ATR when WBX is in RX_ONLY or IDLE This will reduce the LO leakage during non-transmit times
* | usrp1: fix div ratio for interp registerJosh Blum2011-12-151-1/+1
| | | | | | | | | | The interp register was getting set 2x, now fixed! This bug was introduced w/ the streamer work.
* | usrp1: fixed swapped sign on rx cordicJosh Blum2011-12-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | We used to swap I and Q to share converter functions with the newer products. Because of this, the sign on the cordic also had to be swapped. Now that USRP1 has its own converter routines and I and Q are correct, so should be the sign on the cordic. This was a bug introduced in master. TX should not be an issue, because there is no cordic and is adjusted digitally by the codec, after any potential swapping.
* | tvrx: adjust returned lo freq to compensate for negative cordic shiftJosh Blum2011-12-151-0/+7
| |
* | tvrx: fixes for tvrx since the property tree workJosh Blum2011-12-151-6/+6
| |
* | uhd: use more recent udev rules formatJosh Blum2011-12-151-2/+2
| |
* | uhd: typo fix for the error printJosh Blum2011-12-151-1/+1
| |
* | usrp: better error message when dboard fails in initJosh Blum2011-12-151-1/+8
| |
* | uhd: make use of TEMP_FAILURE_RETRY when select()Josh Blum2011-12-141-1/+8
| |