uhd - Ettus' UHD Repository

	Commit message (Collapse)	Author	Age	Files	Lines
*	usrp: cache writes to gpio pins (avoids overhead)	Josh Blum	2012-07-06	1	-1/+7
\|
*	Merge branch 'maint'	Josh Blum	2012-07-06	1	-1/+1
\|\
\| *	uhd: docstring typo fix version.hpp	Josh Blum	2012-07-04	1	-1/+1
\| \|
* \|	lib: FW/FPGA compatibility error prompts user to use regular card/net burner ↵	Nicholas Corgan	2012-07-06	1	-2/+2
\| \| \| \| \| \| \| \|	instead of gui
* \|	Merge branch 'fpga_master'	Josh Blum	2012-07-02	13	-393/+4134
\|\ \
\| * \|	b100: removed unused proto files	Josh Blum	2012-06-13	3	-390/+0
\| \| \|
\| * \|	fpga: added setting regs based simple_i2c_core	Josh Blum	2012-05-30	2	-0/+117
\| \| \|
\| * \|	fpga: added some parameterization to settings_fifo_ctrl	Josh Blum	2012-05-30	1	-3/+6
\| \| \|
\| * \|	fpga: added various models from ISE	Josh Blum	2012-05-30	7	-0/+4011
\| \| \|
* \| \|	Merge branch 'maint'	Josh Blum	2012-07-02	1	-0/+3
\|\ \ \ \| \| \|/ \| \|/\|
\| * \|	cmake: got rid of remaining references of UHD_RELEASE_MODE being treated as ↵	Nicholas Corgan	2012-07-02	1	-0/+3
\| \| \| \| \| \| \| \| \| \| \| \|	a boolean
* \| \|	utils: added .in extension to images downloader source	Josh Blum	2012-07-01	2	-1/+1
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	There seems to be confusion that this file can be used w/o building. The images downloader has been renamed to prevent execution b4 configure.
* \| \|	usrp1: wrap around for DAC tuning outside 1st nyquist	Josh Blum	2012-06-28	1	-1/+8
\| \| \|
* \| \|	Merge branch 'maint'	Josh Blum	2012-06-28	1	-36/+2
\|\\| \|
\| * \|	usrp1: revert calculation for DAC freq outside of 1st Nyquist	Josh Blum	2012-06-28	1	-36/+2
\| \| \| \| \| \| \| \| \| \| \| \|	This patch does not work. A possibile solution will be added to master.
* \| \|	cal: fix for else/ifs in uhd cal utils	Josh Blum	2012-06-28	1	-4/+4
\| \| \|
* \| \|	uhd: docstring - sc8 is a possible cpu type	Josh Blum	2012-06-28	1	-1/+1
\| \| \|
* \| \|	uhd: boost RX gain for RFX calibration	Josh Blum	2012-06-22	1	-1/+1
\| \| \|
* \| \|	usrp2: MAX_SEQS_OUT-1 because ack comes after send	Josh Blum	2012-06-19	1	-1/+1
\| \| \|
* \| \|	Merge branch 'maint'	Josh Blum	2012-06-18	1	-1/+1
\|\\| \|
\| * \|	xcvr2450: fix to disable LO offset for TX side	Josh Blum	2012-06-18	1	-1/+1
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	XCVR2450 has a common LO for RX and TX. The use LO offset should be the same for both sides. When different, a tune for one side will override the other side, because the DSP will not know the compensation factor after the other side is tuned. Setting both use_lo_offset to false is how this was pre 3.4 release.
* \| \|	n2x0: only check for the GPSDO once after power up	Josh Blum	2012-06-18	3	-9/+42
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	We used to only check if the EEPROM was setup properly. But now we always check, but check only once after first power up, and disable the check if not found.
* \| \|	usrp2: created fw peek/poke functions	Josh Blum	2012-06-18	2	-6/+22
\| \| \|
* \| \|	uhd: added wire format option for tx samples example	Josh Blum	2012-06-18	1	-5/+7
\| \| \|
* \| \|	utils: if usrp2_recovery.py is only compatible with Linux, it doesn't need ↵	Nicholas Corgan	2012-06-15	1	-1/+7
\| \| \| \| \| \| \| \| \| \| \| \|	to be part of other installs
* \| \|	usb: prefer to stop the task explicitly	Josh Blum	2012-06-13	1	-0/+6
\| \| \|
* \| \|	RFX: added support for calibration utils	Josh Blum	2012-06-12	3	-5/+17
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Special CAL RX antenna rule: keep mixer enabled to reduce transients. 0 dB gains settings for RX and TX to deal with RFX sensitivity range.
* \| \|	examples: test_dboard_coercion fix	Nicholas Corgan	2012-06-12	1	-75/+48
\| \| \|
* \| \|	convert: add sc8 host to/from sc8 wire format	Josh Blum	2012-06-12	2	-0/+27
\| \| \|
* \| \|	wbx: dont sync for lower rates so we can lock	Josh Blum	2012-06-08	3	-21/+36
\| \| \|
* \| \|	uhd: added some more prints to the probe	Josh Blum	2012-06-08	1	-3/+9
\| \| \|
* \| \|	Merge branch 'maint'	Josh Blum	2012-06-08	1	-1/+1
\|\\| \|
\| * \|	n2x0: fix for net_burner, continue on error	Josh Blum	2012-06-08	1	-1/+1
\| \| \|
* \| \|	utils: UHD Image Downloader - downloads firmware/FPGA images compatible with ↵	Nicholas Corgan	2012-06-07	9	-28/+170
\| \| \| \| \| \| \| \| \| \| \| \|	the current host code and places them in the images directory
* \| \|	usrp2: fix fw bug for spi transact (order of operations)	Josh Blum	2012-06-07	2	-3/+3
\| \| \|
* \| \|	uhd: added uhd::get_pkg_data_path	Josh Blum	2012-06-05	2	-5/+9
\| \| \|
* \| \|	usrp: clear rx dsp on deconstruction	Josh Blum	2012-06-05	1	-0/+10
\| \| \|
* \| \|	usb: created autoflusher task in usb_zero_copy_wrapper	Josh Blum	2012-06-05	1	-2/+45
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Since we dont commit buffers ASAP until filled, autoflusher will do this if timeout occurs.
* \| \|	Merge branch 'maint'	Josh Blum	2012-05-30	2	-10/+11
\|\\| \|
\| * \|	usrp1: shutoff DAC digital w/ TX state machine	Josh Blum	2012-05-30	1	-1/+6
\| \| \|
\| * \|	examples: fix tx bursts so we only set EOB at the end	Josh Blum	2012-05-30	1	-9/+5
\| \| \|
* \| \|	usrp: added control for sr based i2c core	Josh Blum	2012-05-30	3	-0/+194
\| \| \|
* \| \|	docs: GPSDO instruction link fix	Nicholas Corgan	2012-05-25	1	-1/+1
\| \| \|
* \| \|	Merge branch 'maint'	Josh Blum	2012-05-22	1	-1/+1
\|\\| \|
\| * \|	uhd: bumped patch version number to 3.4.2release_003_004_002	Josh Blum	2012-05-22	1	-1/+1
\| \| \|
* \| \|	Merge branch 'maint'	Josh Blum	2012-05-22	1	-4/+4
\|\\| \| \| \| \| \| \| \| \| \| \| \| \| \|	Conflicts: host/docs/usrp_b1xx.rst
\| * \|	Merge branch 'fpga_maint' into maint	Josh Blum	2012-05-22	1	-1/+38
\| \|\ \
\| * \| \|	b100: fix for 61.44 MHz clock mod docs	Josh Blum	2012-05-21	1	-6/+6
\| \| \| \|
* \| \| \|	Merge branch 'fpga_master'	Josh Blum	2012-05-22	1	-1/+38
\|\ \ \ \ \| \| \|_\|/ \| \|/\| \|
\| * \| \|	Merge branch 'maint'	Josh Blum	2012-05-22	1	-1/+38
\| \|\ \ \ \| \| \| \|/ \| \| \|/\|