summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* usrp2: use the socket to determine the device addrJosh Blum2011-12-204-10/+21
|
* uhd: network device discovery -> calc bcast addr under certain conditionsJosh Blum2011-12-201-0/+6
|
* basic: minor fix for copy paste typoJosh Blum2011-12-201-1/+1
|
* Make WBX v3+ TX set max attenuation when idleJason Abele2011-12-162-12/+21
| | | | | | | Because WBX v3+ uses digital step attenuator for TX gain control we can set max attenuation via ATR when WBX is in RX_ONLY or IDLE This will reduce the LO leakage during non-transmit times
* usrp1: fix div ratio for interp registerJosh Blum2011-12-151-1/+1
| | | | | The interp register was getting set 2x, now fixed! This bug was introduced w/ the streamer work.
* usrp1: fixed swapped sign on rx cordicJosh Blum2011-12-151-1/+1
| | | | | | | | | | | We used to swap I and Q to share converter functions with the newer products. Because of this, the sign on the cordic also had to be swapped. Now that USRP1 has its own converter routines and I and Q are correct, so should be the sign on the cordic. This was a bug introduced in master. TX should not be an issue, because there is no cordic and is adjusted digitally by the codec, after any potential swapping.
* tvrx: adjust returned lo freq to compensate for negative cordic shiftJosh Blum2011-12-151-0/+7
|
* tvrx: fixes for tvrx since the property tree workJosh Blum2011-12-151-6/+6
|
* uhd: use more recent udev rules formatJosh Blum2011-12-151-2/+2
|
* uhd: typo fix for the error printJosh Blum2011-12-151-1/+1
|
* usrp: better error message when dboard fails in initJosh Blum2011-12-151-1/+8
|
* uhd: make use of TEMP_FAILURE_RETRY when select()Josh Blum2011-12-141-1/+8
|
* uhd: update udev rules, replace SYSFS w/ ATTRSJosh Blum2011-12-131-2/+2
|
* usrp: added mboard param to set time next ppsJosh Blum2011-12-122-4/+9
|
* uhd: correct images docs for ZPU supportJosh Blum2011-12-121-6/+6
|
* UHD will now print 'L' whenever a late packet is transmitted.Ben Hilburn2011-12-123-0/+9
| | | | | This is similiar to printing 'U' and 'S'. This functionality is not yet supported on the USRP1.
* uhd: some more notes on calibration utilsJosh Blum2011-12-121-1/+6
|
* uhd: added wireformat to samples to fileJosh Blum2011-12-091-5/+7
|
* usrp: rx dsp move init code into clear (like tx)Josh Blum2011-12-051-6/+7
|
* Make TX disable mixer when idle to avoid LO leakageJason Abele2011-12-051-2/+2
|
* uhd: work with stream clearingJosh Blum2011-12-056-13/+28
| | | | | | | | dont clear when using the compat device API tx clear also resets expected seqnum tx clear on usrp2 resets flow control monitor
* Merge branch 'uhd_master'Josh Blum2011-12-012-4/+4
|\
| * Merge branch 'fpga_master' into uhd_masterJosh Blum2011-11-292-4/+4
| |\
| | * usrp2/nseries: restored clock/serdes readbackJosh Blum2011-11-232-4/+4
| | |
* | | usrp1: set scale factor after setting converterJosh Blum2011-11-301-4/+4
|/ /
* | rx_samples_to_file is not streaming the correct nsampsJason Abele2011-11-281-15/+24
| | | | | | | | | | "innovations" in rx_streamer cause it to clear stream commands move stream command to be issued after rx_streamer is created
* | uhd: fix so MSVC client apps dont rely on min/maxJosh Blum2011-11-251-2/+4
| |
* | uhd: tweaks to calibration utilitiesJosh Blum2011-11-235-1009/+20
| |
* | b100: tweaks for fpga resets on initJosh Blum2011-11-221-11/+8
| |
* | dbsrx: set initial freq and bw filter after clocks enabledJosh Blum2011-11-211-4/+8
| |
* | usrp: clear dsp when making new streamerJosh Blum2011-11-217-0/+16
| |
* | basic: fix basic db center freq to always zeroJosh Blum2011-11-201-2/+5
| |
* | uhd: fixed mboard detection checks to the cal utilsJosh Blum2011-11-181-2/+2
| |
* | Merge branch 'calibration'Josh Blum2011-11-1636-51/+1584
|\ \
| * | e100: added self-cal support with minor speedupsJosh Blum2011-11-166-19/+52
| | |
| * | uhd: more common code in cal utilsJosh Blum2011-11-154-101/+69
| | |
| * | uhd: support for applying cal corrections B100Josh Blum2011-11-157-10/+34
| | |
| * | uhd: added calibration usage app notes and renamed apps againJosh Blum2011-11-157-3/+60
| | |
| * | uhd: added freq options and common gain setterJosh Blum2011-11-155-31/+64
| | |
| * | uhd: different interp methods for IQ vs DCJosh Blum2011-11-146-10/+46
| | |
| * | uhd: added tx dc offset calibration + tweaksJosh Blum2011-11-146-49/+325
| | |
| * | usrp: fixed default initialization of iq bal correctionJosh Blum2011-11-133-6/+6
| | |
| * | uhd: share more common code in cal utilsJosh Blum2011-11-113-94/+56
| | |
| * | Merge branch 'fpga_cal_work' into calibrationJosh Blum2011-11-116-8/+8
| |\|
| | * need more umph out of correction valuesJosh Blum2011-11-106-8/+8
| | |
| * | uhd: created rx IQ imbalance app to parallel txJosh Blum2011-11-118-93/+489
| | |
| * | uhd: lots of tweaks for calibration utilityJosh Blum2011-11-112-43/+49
| | |
| * | Updates to accommodate loopback calibration modeJason Abele2011-11-114-30/+71
| | | | | | | | | | | | Added CAL antenna to WBX, SBX and RFX
| * | usrp: basically working iq cal on txJosh Blum2011-11-1012-33/+396
| | |
| * | uhd: basically usable cal sweep for wbxJosh Blum2011-11-104-70/+164
| | |
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 23:54:08 +0000