summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* B100: use FPGA external reset on initNick Foster2012-02-063-1/+13
|
* b100/e100: unify rx/tx fifo clears into oneJosh Blum2012-02-044-14/+8
|
* uhd: added/renamed various readme filesJosh Blum2012-02-046-81/+50
|
* b100: delete some unused registers from mapJosh Blum2012-02-042-7/+0
|
* B100/B150: firmware disable FIFOs until host enables to keep junk outNick Foster2012-02-032-8/+11
|
* dsp rework: added otw mode for benchmark appJosh Blum2012-02-031-6/+9
|
* dsp rework: move setting address of format registerJosh Blum2012-02-022-6/+4
|
* dsp rework: work on usb wrapper for smaller packets, large lutsJosh Blum2012-02-0215-80/+105
|
* b100: sc8 mode not implemented errorJosh Blum2012-02-011-0/+4
|
* b100: bump compat numbers for slave fifo modeJosh Blum2012-02-012-2/+2
| | | | | | Conflicts: host/lib/usrp/b100/b100_impl.hpp
* B100: Modified TX send size to achieve 10.7Msps.Nick Foster2012-02-011-1/+1
|
* B100 firmware changes to allow slave mode TX/RX.Nick Foster2012-02-014-162/+59
|
* B100 host code changes to remove TX padding, remove RX padding, increase max ↵Nick Foster2012-02-012-3/+3
| | | | allowed rate.
* dsp rework: account for no sid used in tx vita pktJosh Blum2012-02-013-1/+4
|
* dsp rework: tx trailer, scaling work (peak)Josh Blum2012-01-3111-31/+110
|
* gen2: added user setting regs api and user coreJosh Blum2012-01-3114-2/+132
|
* dsp rework: work on scaling and args parsing on RX and TX dspJosh Blum2012-01-317-38/+60
| | | | | This simplified some copy pasta in the io_impl.cpp files, and adds a place for sc8 tx mode in the tx dsp core code.
* dsp rework: implemented new scalefactor in rx dsp coreJosh Blum2012-01-319-21/+35
|
* uhd: implement convert_sc8to_sc16 table w/ scalarJosh Blum2012-01-311-0/+30
|
* uhd: branch-less round for time spec convert to ticksJosh Blum2012-01-311-2/+1
| | | | | | | | | | | This fixes valgrind warnings with branching on unit'd values, and possible exceptions thrown on bad unit'd values. As it turns out, sometimes tick_rate was passed unit'd, however, the value calculated was not of consequence. Also, iround was overkill because we dont need to handle negative tick rates or frac seconds, or bounds checking.
* usrp1/b100: reenumeration loop with timeout only when foundJosh Blum2012-01-272-2/+6
|
* Swap I/Q on transmitJason Abele2012-01-271-1/+1
|
* usrp1/b100: handle longer reenumerations with loop and timeoutJosh Blum2012-01-262-34/+50
|
* uhd: add samples per pkt option to rx streamerJosh Blum2012-01-264-3/+11
|
* usrp2: same change but to fw updaterJosh Blum2012-01-242-11/+3
|
* usrp2: firmware should reset dsp on icmp pktJosh Blum2012-01-242-11/+8
| | | | | | | | 1) This should kill any streaming, the previous calls would just stop continuous streaming 2) The breaks were changed to returns to avoid reprogramming the framer.
* uhd: flush transport for new rx streamersJosh Blum2012-01-236-8/+9
|
* images: include license file into image tarballsJosh Blum2012-01-171-0/+1
|
* usrp1: use fixed bit width integer for hashJosh Blum2012-01-171-14/+17
|
* uhd: patch to support PKG_LIB_DIR per debian fs standardsJosh Blum2012-01-135-8/+11
| | | | | | uhd binaries will continue to install into share/uhd, however, one can specify -DPKG_LIB_DIR=lib/uhd for example to move where the binaries are installed
* uhd: dont populate requires.private in pc fileJosh Blum2012-01-121-9/+0
| | | | | | | | Benefits to having it, it may be technically correct, but isnt needed for the purposes of building. Downsides: makes pkg-config spit errors when private development packages not installed, or pc file not present for other reasons
* Merge branch 'fpga_master'Josh Blum2012-01-111-377/+377
|\
| * n2xx: updated bootloader to latest build in uhd masterJosh Blum2012-01-111-377/+377
| |
* | n2xx: fix burner print if bad revJosh Blum2012-01-111-1/+1
| |
* | usrp: db manager tweak for contructor throwingJosh Blum2012-01-111-2/+2
| |
* | usrp: compensate for other sc8 conversion gainJosh Blum2012-01-091-1/+3
| |
* | usb: updated FindUSB1.cmake for standards complianceJosh Blum2012-01-093-31/+30
| | | | | | | | | | Using cmake's recommended conventions for find scripts. Find script also handles different library name for freebsd.
* | sbx: fix dboard tuning to cache resultJosh Blum2012-01-054-23/+5
| |
* | usrp1: initialize tick_rate prop (fixes readback)Josh Blum2012-01-051-1/+2
| |
* | N210 R4 should be using LVDS TX clock, not CMOS.Nick Foster2012-01-041-4/+17
| |
* | usrp2: fw fix for hal_uart_getc_noblock return codeJosh Blum2012-01-044-6/+8
| |
* | uhd: typo fix in tx waveforms optionsJosh Blum2012-01-031-1/+1
| |
* | uhd: fixes that make uhd compile on freebsdJosh Blum2011-12-302-3/+3
| | | | | | | | | | Fixes gcc version check in byteswap. Fixes typo in thread prio.
* | e100: better error message for eeprom model errorJosh Blum2011-12-311-5/+11
| |
* | uhd: manually link into pthreads hereJosh Blum2011-12-271-0/+1
| |
* | uhd: manually calculate bcast addr, boost version buggyJosh Blum2011-12-221-1/+6
| |
* | Merge branch 'network_foo'Josh Blum2011-12-216-10/+249
|\ \
| * | usrp2: added bind option to the relayJosh Blum2011-12-201-7/+9
| | |
| * | usrp2: more work on relay app and sequence error detectionJosh Blum2011-12-201-14/+45
| | |
| * | usrp2: created network relay example appJosh Blum2011-12-202-0/+195
| | |
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 14:54:54 +0000