| Commit message (Collapse) | Author | Age | Files | Lines | |
|---|---|---|---|---|---|
| * | uhd: replaced many conditional prints with UHD_LOG usage | Josh Blum | 2011-05-04 | 8 | -32/+28 |
| | | |||||
| * | uhd: tweaks for logger file entries | Josh Blum | 2011-05-04 | 2 | -14/+30 |
| | | |||||
| * | usrp: replaced conditional dboard debug prints w/ UHD_LOGV(often) | Josh Blum | 2011-05-04 | 9 | -89/+68 |
| | | |||||
| * | uhd: moved the logger into the utils subdir | Josh Blum | 2011-05-04 | 6 | -6/+10 |
| | | |||||
| * | uhd: added configurable default log level and thread safety | Josh Blum | 2011-05-04 | 2 | -9/+80 |
| | | |||||
| * | uhd: work on the backend for a logging facility | Josh Blum | 2011-05-04 | 4 | -0/+199 |
| | | |||||
| * | usrp2: added REF_MIMO and PPS_MIMO for USRP2 clock config | Josh Blum | 2011-05-03 | 2 | -15/+25 |
| | | | | | | | | | | Basically, one can tell a MIMO master to lock to MIMO ref and/or time. This is an alternative to the mimo_mode=slave/master device args. When using this alternative, one should always set the mimo_mode to maser. When in master mode, any clock config settings can be used. When in slave mode, the clock config setting are forced to MIMO_REF/PPS | ||||
| * | Merge branch 'rfx_rssi' | Josh Blum | 2011-05-02 | 2 | -6/+30 |
| |\ | |||||
| | * | Added RSSI sensor for RFX series (not rfx400) | Jason Abele | 2011-05-02 | 2 | -6/+30 |
| | | | |||||
| * | | Added docs for sbx | Jason Abele | 2011-05-02 | 1 | -0/+39 |
| |/ | |||||
| * | usrp1: toggle the FPGA reset and RX reset registers at init | Josh Blum | 2011-05-01 | 1 | -8/+18 |
| | | |||||
| * | usrp-e100: shrink name field to git mcr into eeprom | Josh Blum | 2011-04-20 | 1 | -2/+3 |
| | | |||||
| * | USRP1: added support for setting clock rate from EEPROM | Josh Blum | 2011-05-01 | 6 | -14/+67 |
| | | | | | | Basically, same deal as the previous changeset but for USRP1. Modified previous changes so that the key is shorter (mcr = master_clock_rate) | ||||
| * | usrp-e100: add ability to set/get default master clock rate from EEPROM | Josh Blum | 2011-05-01 | 5 | -14/+59 |
| | | | | | | | | | | Mboard eeprom map class can parse the setting (4 byte float). The clock control will try to set the eeprom rate if present, otherwise or under failure condition, it sets the default. Updated docs, example, and provided helpful verbose. I would prefer that users burn the desired rate to the eeprom (and they may too). | ||||
| * | uhd: fixed typo in tune request/result inter_freq -> rf_freq | Josh Blum | 2011-05-01 | 5 | -41/+37 |
| | | | | | | | | | For some reason, the code said intermediate frequency, however, it was used and treated as RF frequency. It was always intended to be the RF frequency, but was misnamed due to a cognitive distortion. | ||||
| * | usrp2: use default mtu as upper limit unless user specifies | Josh Blum | 2011-04-30 | 1 | -11/+12 |
| | | |||||
| * | usrp2: move card burner code out of get_options so get_options can be used ↵ | Josh Blum | 2011-04-29 | 1 | -8/+8 |
| | | | | | by the gui without interference | ||||
| * | usrp2: allow devices to be discovered when usrp2_iface::make throws | Josh Blum | 2011-04-29 | 1 | -12/+16 |
| | | | | | | | | | If the discovery throws an exception, we can still yeild a discovered device. The error (which is a problem) will re-appear at make/factory time. The side effect is that a device w/ error will be discovered w/ empty serial and names. We protect against this by supporing older firmwares where i2c proto is compatible. | ||||
| * | usrp2: added support for GPSDO configuration bits in EEPROM | Josh Blum | 2011-04-29 | 3 | -5/+86 |
| | | | | | | | | Added instructions to install and burn eeprom to documentation. Made gps_ctrl and gps_time sensor optional. Added sensors for motherboard to documentation | ||||
| * | GPS parser fixes for get_time. | Nick Foster | 2011-04-29 | 2 | -7/+5 |
| | | |||||
| * | USRP2/N210: firmware UART read no longer drops 20th char | Nick Foster | 2011-04-29 | 1 | -6/+8 |
| | | |||||
| * | USRP2: enable GPS by default | Nick Foster | 2011-04-29 | 1 | -3/+3 |
| | | |||||
| * | USRP2: Added GPS time support to the sensors interface. gps_time sensor ↵ | Nick Foster | 2011-04-29 | 3 | -1/+15 |
| | | | | | returns epoch time as time_t. Untested. | ||||
| * | N210: implemented mboard sensors for ref lock and MIMO lock | Nick Foster | 2011-04-29 | 4 | -1/+28 |
| | | |||||
| * | uhd: make benchmark example take a rate, and give special warning for usrp1 | Josh Blum | 2011-04-29 | 1 | -17/+22 |
| | | |||||
| * | usrp2: card burner protections when the user specifies a device not in the list | Josh Blum | 2011-04-28 | 1 | -2/+12 |
| | | |||||
| * | usrp2: include dd.exe in windows installers | Josh Blum | 2011-04-28 | 3 | -0/+15 |
| | | | | | uhd build system downloads dd.exe from ettus.com so we dont have to check it in | ||||
| * | dbsrx: implement SUBDEV_PROP_ANTENNA to give users a better error | Josh Blum | 2011-04-28 | 1 | -1/+5 |
| | | |||||
| * | usrp_e100: added recv/send_frame_size xport args | Josh Blum | 2011-04-16 | 3 | -11/+23 |
| | | |||||
| * | rfx: reverted change, now prefer R divider to clock divider | Josh Blum | 2011-04-16 | 1 | -22/+17 |
| | | | | | | | There seems to be some issue using lower clock rates, at least on E100, I am reverting this now until I can figure out why it happens, or until I can find a more stable way to offer this feature. | ||||
| * | usrp1: fix for tx under remainder conditions | Josh Blum | 2011-04-27 | 1 | -3/+3 |
| | | | | | | The remainder was accidentally lost because the offset to the buffer was not propagated outside of the commit function. | ||||
| * | usrp1: the rx mux was reversed (fixed multi-channel rx) | Josh Blum | 2011-04-27 | 1 | -1/+1 |
| | | |||||
| * | uhd: updated readme for WBX/SBX work | Josh Blum | 2011-04-26 | 1 | -1/+2 |
| | | |||||
| * | Merge branch 'gdb_support' | Josh Blum | 2011-04-26 | 16 | -293/+620 |
| |\ | | | | | | | | | Conflicts: host/lib/usrp/dboard/CMakeLists.txt | ||||
| | * | Enhance WBX IQ balance performance through LO drive | Josh Blum | 2011-04-26 | 1 | -0/+29 |
| | | | |||||
| | * | wbx: split wbx into daughterboard and granddaughterboard implementation | Josh Blum | 2011-04-26 | 4 | -196/+398 |
| | | | |||||
| | * | usrp: support for grand daughter board eeprom | Josh Blum | 2011-04-26 | 9 | -19/+67 |
| | | | |||||
| | * | usrp: work on dboard_manager to register an ID for multiple xcvr combinations | Josh Blum | 2011-04-26 | 1 | -75/+123 |
| | | | |||||
| * | | Merge branch 'sbx-adi' | Josh Blum | 2011-04-26 | 2 | -0/+794 |
| |\ \ | |||||
| | * | | Handle antenna switching and LEDs | Jason Abele | 2011-04-23 | 1 | -36/+120 |
| | | | | |||||
| | * | | SBX enable LO LPF at 1.5GHz | Jason Abele | 2011-04-23 | 1 | -12/+31 |
| | | | | |||||
| | * | | Makes 2nd SBX proto work | Jason Abele | 2011-04-23 | 1 | -32/+47 |
| | | | | |||||
| | * | | Updating SBX to latest UHD | Jason Abele | 2011-04-23 | 1 | -15/+47 |
| | | | | |||||
| | * | | Capture characterization changes | Jason Abele | 2011-04-23 | 1 | -6/+6 |
| | | | | |||||
| | * | | Initial SBX-ADI driver | Jason Abele | 2011-04-23 | 2 | -0/+644 |
| | | | | |||||
| * | | | xcvr2450: initialize the max_power variable | Josh Blum | 2011-04-26 | 1 | -1/+1 |
| | |/ |/| | |||||
| * | | uhd: added scoped lock to device find and make (for thread safety) | Josh Blum | 2011-04-26 | 1 | -0/+7 |
| | | | |||||
| * | | usrp1: rmmod usbtest because it interferes | Josh Blum | 2011-04-25 | 1 | -0/+6 |
| | | | |||||
| * | | uhd: added more hw params to rx_ascii_art_dft | Josh Blum | 2011-04-25 | 1 | -12/+41 |
| |/ | |||||
| * | uhd: move thread loop condition flag to before barrier (prevents race condition) | Josh Blum | 2011-04-22 | 3 | -3/+3 |
| | | |||||
 |
index : uhd | |
| Ettus' UHD Repository |
| summaryrefslogtreecommitdiffstats |