| Commit message (Expand) | Author | Age | Files | Lines |
|---|
| * | put these files in the right place. newfifo is long gone. | Matt Ettus | 2011-02-16 | 9 | -5/+5 |
| * | separate clear for tx and rx, and add a global reset from the host | Matt Ettus | 2011-02-02 | 1 | -10/+19 |
| * | usrp-e100: added missing newfifo files to list, added missing signals for timed | Josh Blum | 2011-01-26 | 2 | -1/+7 |
| * | usrp-e100: added 32bit test read/write register, fixes to get building | Josh Blum | 2011-01-25 | 1 | -7/+17 |
| * | reorganized u1e register space to make room for 64 settingregs | Matt Ettus | 2011-01-25 | 1 | -12/+15 |
| * | believed to fix fifo swizzling with partially empty lines | Matt Ettus | 2011-01-21 | 3 | -25/+114 |
| * | usrp-e100: added readback mux 32 as slave 7 for time readback | Josh Blum | 2011-01-14 | 3 | -4/+90 |
| * | xbar and valve: fix switching delayed by active signal | Josh Blum | 2011-01-11 | 2 | -9/+12 |
| * | usrp-n210: added power-on-reset controller, reset all wb perifs | Josh Blum | 2011-01-10 | 1 | -10/+13 |
| * | usrp-n210: uploaded most recent bootloader rmi | Josh Blum | 2011-01-10 | 1 | -167/+204 |
| * | usrp-n210: use cpu rst on the wb+icap, uploaded latest bootloader rmi | Josh Blum | 2011-01-09 | 2 | -169/+172 |
| * | packet_router: tweak mode SR (its only 1 bit) | Josh Blum | 2011-01-07 | 1 | -3/+2 |
| * | Merge branch 'cordic_policy' into next | Josh Blum | 2011-01-04 | 5 | -49/+83 |
| |\ |
|
| | * | hook up sampled pps in u2plus, remove unused priority encoder, minor cleanups | Matt Ettus | 2010-12-30 | 2 | -26/+18 |
| | * | processor can read back vita_time at last pps | Matt Ettus | 2010-12-30 | 2 | -11/+11 |
| | * | run should actually turn on now any time in the IBS_RUN state | Matt Ettus | 2010-12-29 | 1 | -11/+8 |
| | * | gyrations to get it to meet timing | Matt Ettus | 2010-12-29 | 1 | -13/+23 |
| | * | should keep cordic spinning and the rest of the tx going through | Matt Ettus | 2010-12-28 | 1 | -4/+33 |
| * | | usrp-n210: checked in updated bootloader (from next with fixes) | Josh Blum | 2010-12-31 | 1 | -36/+36 |
| * | | usrp2: removed unused changed signal for mode selection | Josh Blum | 2010-12-29 | 1 | -2/+1 |
| * | | packet_router: replace buffers interfaced in packet router with buffer_int2 | Josh Blum | 2010-12-28 | 3 | -163/+25 |
| * | | now uses 2 rams, one for read, one for write | Matt Ettus | 2010-12-28 | 1 | -89/+97 |
| * | | reformatting | Matt Ettus | 2010-12-28 | 1 | -5/+1 |
| * | | first cut at new buffer interface for CPU. Like old buffer_int plus | Matt Ettus | 2010-12-28 | 1 | -0/+169 |
| * | | unused line | Matt Ettus | 2010-12-28 | 1 | -1/+0 |
| * | | packet_router: use the mode register to reset hs control and cpu sms | Josh Blum | 2010-12-27 | 1 | -22/+13 |
| * | | Merge branch 'udp_ports' into next | Josh Blum | 2010-12-22 | 6 | -37/+66 |
| |\ \ |
|
| | * | | udp_ports: fixed address comparison B+14 is comparison | Josh Blum | 2010-12-21 | 1 | -1/+1 |
| | * | | don't overwrite checksum values | Matt Ettus | 2010-12-21 | 1 | -7/+8 |
| | * | | udp_ports: set the source port and destination port from table | Josh Blum | 2010-12-17 | 1 | -12/+16 |
| | * | | generate port number headers in the dsp error units | Matt Ettus | 2010-12-15 | 4 | -8/+12 |
| | * | | now supports up to 4 different udp ports | Matt Ettus | 2010-12-15 | 2 | -23/+43 |
| | |/ |
|
| * | | usrp-n210: add missing wires, incr compat, use boot ram as stack space | Josh Blum | 2010-12-22 | 1 | -16/+14 |
| * | | usrp-n210: delay reset for boot loader stack pointer to init, copied bl.rmi w... | Josh Blum | 2010-12-18 | 2 | -187/+173 |
| * | | usrp-n210: almost working w/ packet router + zpu | Josh Blum | 2010-12-17 | 9 | -301/+313 |
| * | | usrp-n210: integrate zpu and packet router, builds but untested | Josh Blum | 2010-12-14 | 1 | -72/+77 |
| * | | Merge branch 'zpu' into next | Josh Blum | 2010-12-14 | 11 | -22/+1567 |
| |\ \ |
|
| | * | | zpu: working, modified top level sizes, disable interrupt | Josh Blum | 2010-12-14 | 2 | -8/+5 |
| | * | | Merge branch 'packet_router' into zpu | Josh Blum | 2010-12-12 | 15 | -303/+383 |
| | |\ \ |
|
| | * | | | zpu: moved top level file in hopes for easy merge | Josh Blum | 2010-12-12 | 2 | -1014/+229 |
| | * | | | zpu: set all the address widths to 16, grumble | Josh Blum | 2010-12-08 | 4 | -5/+5 |
| | * | | | zpu: moved stack pointer and made connection for status | Josh Blum | 2010-12-06 | 2 | -2/+3 |
| | * | | | zpu: brought status signal out to top level | Josh Blum | 2010-12-06 | 1 | -1/+3 |
| | * | | | zpu: shrank the ram size and address bus to 16k | Josh Blum | 2010-12-06 | 1 | -5/+5 |
| | * | | | zpu: added a zpu + wishbone opencore and integrated into top level | Josh Blum | 2010-12-06 | 10 | -10/+1554 |
| * | | | | packet_router: all non ip/udp should also go to both | Josh Blum | 2010-12-13 | 1 | -7/+5 |
| | |/ /
|/| | |
|
| * | | | packet_router: harmless logic tweaks | Josh Blum | 2010-12-12 | 2 | -11/+8 |
| * | | | packet_router: reverted enable change to dsp framer, it was already correct | Josh Blum | 2010-12-12 | 1 | -2/+1 |
| * | | | packet_router: raise enable for bram reads the cycle before as well | Josh Blum | 2010-12-11 | 2 | -2/+4 |
| * | | | packet_router: added fifo before cpu_out, tweaked inspection logic | Josh Blum | 2010-12-10 | 1 | -25/+29 |
