uhd - Ettus' UHD Repository

	Commit message (Collapse)	Author	Age	Files	Lines
*	Merge branch 'b100_shrink' into new_work	Josh Blum	2011-07-19	29	-718/+967
\|\
\| *	usrp2: split compat number into major/minor (increment minor for fixes)	Josh Blum	2011-07-03	2	-2/+2
\| \|
\| *	e100: proc_int should be high when interrupted	Josh Blum	2011-06-20	1	-3/+1
\| \|
\| *	e100: added proc_int and buffer for async messages	Josh Blum	2011-06-19	2	-17/+49
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Redirected the tx_err stream into a buffer_int2, and connected interrupt when a packet is written. The proc_int is muxed into the aux spi miso to use when its not being selected for spi.
\| *	u1p: remove uart and bus testing to fit easier	Matt Ettus	2011-06-16	1	-8/+9
\| \|
\| *	u1p: remove unused ports	Matt Ettus	2011-06-16	1	-1/+0
\| \|
\| *	u1e: core compile now works as a fullchip lint	Matt Ettus	2011-06-16	1	-1/+1
\| \|
\| *	u1p/u1e: cleanup some warnings, connect the correct clocks	Matt Ettus	2011-06-16	3	-12/+11
\| \|
\| *	USRP2/N2x0: incremented compat numbers for frontend work	Josh Blum	2011-06-15	2	-2/+2
\| \|
\| *	Merge branch 'usrp_e100_aux_spi' into dsp_rebase	Matt Ettus	2011-06-15	5	-156/+24
\| \|\ \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	* usrp_e100_aux_spi: usrp-e100: removed passthrough files, not needed w/ aux spi for clock chip usrp-e100: make reg_test32 persistent across resets, bump compat number usrp-e100: work on aux spi Conflicts: usrp2/top/E1x0/u1e_core.v
\| \| *	usrp-e100: removed passthrough files, not needed w/ aux spi for clock chip	Josh Blum	2011-06-09	3	-139/+0
\| \| \|
\| \| *	usrp-e100: make reg_test32 persistent across resets, bump compat number	Josh Blum	2011-06-08	1	-2/+3
\| \| \|
\| \| *	usrp-e100: work on aux spi	Josh Blum	2011-06-08	2	-17/+22
\| \| \|
\| * \|	u1e/u1p: new register map for new dsp	Matt Ettus	2011-06-15	2	-26/+32
\| \| \|
\| * \|	u1p: work in dual rx and frontend from u1e	Matt Ettus	2011-06-14	2	-16/+61
\| \| \|
\| * \|	u1p: new tx dsp frontend, copied from u1e	Matt Ettus	2011-06-14	1	-10/+17
\| \| \|
\| * \|	u1e-dsp: attach tx dc offset and iq balance	Matt Ettus	2011-06-14	2	-10/+14
\| \| \|
\| * \|	dsp: implement iqbal on tx	Matt Ettus	2011-06-12	2	-30/+35
\| \| \|
\| * \|	dsp: remove unused setting reg	Matt Ettus	2011-06-08	1	-4/+0
\| \| \|
\| * \|	dsp: added tx_frontend, instantiated in u2/u2p	Matt Ettus	2011-06-08	6	-25/+81
\| \| \|
\| * \|	dsp: small_hb_dec now 24 bits wide as well	Matt Ettus	2011-06-08	2	-39/+38
\| \| \|
\| * \|	dsp: do everything at 24 bits wide	Matt Ettus	2011-06-08	5	-120/+204
\| \| \|
\| * \|	u1e: update u1e to use new rx_frontend, and give it a 2nd rx dsp core	Matt Ettus	2011-06-08	1	-21/+74
\| \| \|
\| * \|	u2/u2p: use all 24 bits from the rx_frontend	Matt Ettus	2011-06-08	2	-2/+2
\| \| \|
\| * \|	dsp: pass 24 bit wide signals between frontend and dsp core.	Matt Ettus	2011-06-08	2	-8/+12
\| \| \| \| \| \| \| \| \| \| \| \|	Overkill, but we have the bits already, so why throw them away?
\| * \|	dsp: clip in hb_dec to prevent the rare overflow with certain frequencies at ↵	Matt Ettus	2011-06-08	2	-6/+19
\| \| \| \| \| \| \| \| \| \| \| \|	max amplitude
\| * \|	dsp: add guard bit to top of cordic to allow clipping on output instead of ↵	Matt Ettus	2011-06-08	1	-5/+9
\| \| \| \| \| \| \| \| \| \| \| \|	wrapping
\| * \|	dsp: fix off-by-one error in timing of hb_dec	Matt Ettus	2011-06-08	1	-1/+1
\| \| \|
\| * \|	dsp: register hb output	Matt Ettus	2011-06-08	4	-293/+15
\| \| \|
\| * \|	dsp: no need to keep all the low order bits from the accumulator	Matt Ettus	2011-06-08	1	-2/+2
\| \| \|
\| * \|	dsp: increase gain of small_hb_dec because it used to scale down by factor ↵	Matt Ettus	2011-06-08	2	-5/+9
\| \| \| \| \| \| \| \| \| \| \| \|	of 2. Clip if needed.
\| * \|	dsp: use round_sd in small_hb_dec	Matt Ettus	2011-06-08	1	-3/+6
\| \| \|
\| * \|	dsp: reorganized scaling and rounding, removed multipliers (will put back in ↵	Matt Ettus	2011-06-08	3	-49/+46
\| \| \| \| \| \| \| \| \| \| \| \|	a different location)
\| * \|	dsp: testbenches for dsp blocks	Matt Ettus	2011-06-08	2	-0/+113
\| \| \|
\| * \|	dsp: tx_dcoffset, not integrated yet	Matt Ettus	2011-06-08	1	-0/+26
\| \| \|
\| * \|	dsp: add resets for simulation purposes	Matt Ettus	2011-06-08	1	-4/+4
\| \| \|
\| * \|	dsp: do proper rounding at the end of dsp chain	Matt Ettus	2011-06-08	1	-1/+1
\| \| \|
\| * \|	dsp: reworked muxes on rx	Matt Ettus	2011-06-08	2	-22/+31
\| \| \|
\| * \|	dsp: more typos	Matt Ettus	2011-06-08	1	-2/+2
\| \| \|
\| * \|	dsp: new files in dsp directory	Matt Ettus	2011-06-08	1	-0/+3
\| \| \|
\| * \|	dsp: fix typos	Matt Ettus	2011-06-08	3	-14/+14
\| \| \|
\| * \|	dsp: add2_and_clip_reg and round_sd now are now strobed to be compatible	Matt Ettus	2011-06-08	6	-26/+46
\| \| \| \| \| \| \| \| \| \| \| \|	with strobed (non-full rate) data
\| * \|	u2/u2p: use new rx_frontend in u2 and u2p	Matt Ettus	2011-06-08	3	-6/+17
\| \| \|
\| * \|	dsp: use sigma delta rounding in rx_dcoffset and in dsp_core_rx	Matt Ettus	2011-06-08	2	-16/+6
\| \| \|
\| * \|	dsp: reworked round_sd, it is much simpler now	Matt Ettus	2011-06-08	2	-34/+14
\| \| \|
\| * \|	dsp: first cut at sigma-delta rounding	Matt Ettus	2011-06-08	2	-0/+92
\| \| \|
\| * \|	dsp: pass the error through in the rounding function	Matt Ettus	2011-06-08	1	-4/+9
\| \| \|
\| * \|	u2/u2p: misc connection and compilation fixes	Matt Ettus	2011-06-08	4	-20/+22
\| \| \|
\| * \|	unused nets	Matt Ettus	2011-06-08	1	-1/+0
\| \| \|
\| * \|	u2/u2p: pull IQ balance and dcoffset out of dsp_core, put in frontend module	Matt Ettus	2011-06-08	4	-44/+91
\| \| \|