| Commit message (Expand) | Author | Age | Files | Lines |
|---|
| ... | |
| | * | should keep cordic spinning and the rest of the tx going through | Matt Ettus | 2010-12-28 | 1 | -4/+33 |
| * | | usrp-n210: checked in updated bootloader (from next with fixes) | Josh Blum | 2010-12-31 | 1 | -36/+36 |
| * | | usrp2: removed unused changed signal for mode selection | Josh Blum | 2010-12-29 | 1 | -2/+1 |
| * | | packet_router: replace buffers interfaced in packet router with buffer_int2 | Josh Blum | 2010-12-28 | 3 | -163/+25 |
| * | | now uses 2 rams, one for read, one for write | Matt Ettus | 2010-12-28 | 1 | -89/+97 |
| * | | reformatting | Matt Ettus | 2010-12-28 | 1 | -5/+1 |
| * | | first cut at new buffer interface for CPU. Like old buffer_int plus | Matt Ettus | 2010-12-28 | 1 | -0/+169 |
| * | | unused line | Matt Ettus | 2010-12-28 | 1 | -1/+0 |
| * | | packet_router: use the mode register to reset hs control and cpu sms | Josh Blum | 2010-12-27 | 1 | -22/+13 |
| * | | Merge branch 'udp_ports' into next | Josh Blum | 2010-12-22 | 6 | -37/+66 |
| |\ \ |
|
| | * | | udp_ports: fixed address comparison B+14 is comparison | Josh Blum | 2010-12-21 | 1 | -1/+1 |
| | * | | don't overwrite checksum values | Matt Ettus | 2010-12-21 | 1 | -7/+8 |
| | * | | udp_ports: set the source port and destination port from table | Josh Blum | 2010-12-17 | 1 | -12/+16 |
| | * | | generate port number headers in the dsp error units | Matt Ettus | 2010-12-15 | 4 | -8/+12 |
| | * | | now supports up to 4 different udp ports | Matt Ettus | 2010-12-15 | 2 | -23/+43 |
| | |/ |
|
| * | | usrp-n210: add missing wires, incr compat, use boot ram as stack space | Josh Blum | 2010-12-22 | 1 | -16/+14 |
| * | | usrp-n210: delay reset for boot loader stack pointer to init, copied bl.rmi w... | Josh Blum | 2010-12-18 | 2 | -187/+173 |
| * | | usrp-n210: almost working w/ packet router + zpu | Josh Blum | 2010-12-17 | 9 | -301/+313 |
| * | | usrp-n210: integrate zpu and packet router, builds but untested | Josh Blum | 2010-12-14 | 1 | -72/+77 |
| * | | Merge branch 'zpu' into next | Josh Blum | 2010-12-14 | 11 | -22/+1567 |
| |\ \ |
|
| | * | | zpu: working, modified top level sizes, disable interrupt | Josh Blum | 2010-12-14 | 2 | -8/+5 |
| | * | | Merge branch 'packet_router' into zpu | Josh Blum | 2010-12-12 | 15 | -303/+383 |
| | |\ \ |
|
| | * | | | zpu: moved top level file in hopes for easy merge | Josh Blum | 2010-12-12 | 2 | -1014/+229 |
| | * | | | zpu: set all the address widths to 16, grumble | Josh Blum | 2010-12-08 | 4 | -5/+5 |
| | * | | | zpu: moved stack pointer and made connection for status | Josh Blum | 2010-12-06 | 2 | -2/+3 |
| | * | | | zpu: brought status signal out to top level | Josh Blum | 2010-12-06 | 1 | -1/+3 |
| | * | | | zpu: shrank the ram size and address bus to 16k | Josh Blum | 2010-12-06 | 1 | -5/+5 |
| | * | | | zpu: added a zpu + wishbone opencore and integrated into top level | Josh Blum | 2010-12-06 | 10 | -10/+1554 |
| * | | | | packet_router: all non ip/udp should also go to both | Josh Blum | 2010-12-13 | 1 | -7/+5 |
| | |/ /
|/| | |
|
| * | | | packet_router: harmless logic tweaks | Josh Blum | 2010-12-12 | 2 | -11/+8 |
| * | | | packet_router: reverted enable change to dsp framer, it was already correct | Josh Blum | 2010-12-12 | 1 | -2/+1 |
| * | | | packet_router: raise enable for bram reads the cycle before as well | Josh Blum | 2010-12-11 | 2 | -2/+4 |
| * | | | packet_router: added fifo before cpu_out, tweaked inspection logic | Josh Blum | 2010-12-10 | 1 | -25/+29 |
| * | | | packet_router: gave the inspector a 4th output which is CPU only | Josh Blum | 2010-12-10 | 1 | -83/+123 |
| * | | | Merge branch 'ise12' into packet_router | Josh Blum | 2010-12-10 | 12 | -107/+241 |
| |\ \ \
| | |/
| |/| |
|
| | * | | time sync on usrp2 as well, added debug pins to time sync. | Matt Ettus | 2010-12-10 | 2 | -2/+10 |
| | * | | slave side can now sync | Matt Ettus | 2010-12-10 | 2 | -13/+33 |
| | * | | Only do udp now, renamed old ports to exp_time_* | Matt Ettus | 2010-12-09 | 2 | -2/+2 |
| | * | | udp is now the default | Matt Ettus | 2010-12-09 | 2 | -2/+2 |
| | * | | remove old raw ethernet version | Matt Ettus | 2010-12-09 | 2 | -882/+0 |
| | * | | reimplemented mimo time transfer to handle 64 bits. Still needs | Matt Ettus | 2010-12-09 | 5 | -71/+164 |
| | * | | renamed exp_pps_* to be exp_time_*, which is the mimo synchronization signal | Matt Ettus | 2010-12-09 | 5 | -22/+22 |
| | * | | Merge branch 'time_compare_speedup' into ise12 | Matt Ettus | 2010-12-09 | 1 | -2/+16 |
| | |\ \ |
|
| | | * | | should safely delay the late signal which was causing timing problems | Matt Ettus | 2010-12-06 | 1 | -2/+16 |
| | * | | | u2plus: clock lock pin capitalization fail | Nick Foster | 2010-12-06 | 2 | -2/+2 |
| | |/ / |
|
| * | / | packet_router: renamed top level files in an attempt to merge cleanly | Josh Blum | 2010-12-10 | 4 | -1091/+209 |
| | |/
|/| |
|
| * | | packet_router: added status readback for mode, incremented compat number | Josh Blum | 2010-11-24 | 2 | -1/+2 |
| * | | packet_router: split the control register into misc, cpu hs out, cpu hs inp | Josh Blum | 2010-11-24 | 1 | -10/+24 |
| * | | packet_router: modification for sequence number and vrt header offset | Josh Blum | 2010-11-23 | 1 | -1/+1 |
| * | | packet_router: it makes more sense to connect the control flags this way now | Josh Blum | 2010-11-23 | 1 | -13/+6 |
