Commit message (Collapse) | Author | Age | Files | Lines | |
---|---|---|---|---|---|
* | usrp1: Add USB transport interfaces | Thomas Tsou | 2010-08-13 | 5 | -0/+192 |
| | | | | | | | | | This patch adds generic interfaces for control and zero-copy transport of data between the host and a slave device. The interfaces are separate and generic to accommodate multiple implementations that may include cross platform libraries such as libusb or a platform specific implementation such as Linux usbfs. | ||||
* | usrp1: Add SPI transaction command to FX2 firmware | Thomas Tsou | 2010-08-13 | 4 | -3/+116 |
| | | | | | | | | | | | | | | | | | | | | | | | | | | The existing SPI read command is set for half-duplex 8-bit or 16-bit writes followed by an equivalent sized read. This patch adds a new command, VRQ_SPI_TRANSACT, which performs a full-duplex transaction up to 4-bytes. Since the data buffer of the USB control transfer is not available for outbound data on IN requests, the 4 bytes of write data are sent through the request parameters. Enables are sent in the previsouly unused high byte of the length parameter. The USB field mappings are shown below. Only rising edge and MSB operation is supported. Field (8-bit) Description ===== ===== bmRequestType 0x80 (USB Device IN request) bRequest 0x83 (VRQ_SPI_TRANSACT) wValueH OUT data(0) wValueL OUT data(1) wIndexH OUT data(2) wIndexL OUT data(3) wLengthH SPI enables wLengthL Number of bytes to transfer (1-4) EP0BUF IN data | ||||
* | usrp1: Add FX2 firmware files | Thomas Tsou | 2010-08-13 | 107 | -0/+11421 |
| | | | | | These firmware files for the usrp1 are imported from GNURadio. | ||||
* | uhd: created floor_step to handle floating-point errors in gain group | Josh Blum | 2010-08-12 | 1 | -6/+25 |
| | |||||
* | uhd: avoid segfaults - use CPP macros for paths and dont split empty string | Josh Blum | 2010-08-11 | 2 | -9/+10 |
| | |||||
* | Merge branch 'changes' | Josh Blum | 2010-08-11 | 13 | -31/+216 |
|\ | |||||
| * | uhd-images: do not require language check for images project | Josh Blum | 2010-08-10 | 1 | -1/+1 |
| | | |||||
| * | usrp2: work on card burner to pad the image file before a write | Josh Blum | 2010-08-10 | 2 | -12/+32 |
| | | |||||
| * | usrp2: added fpga compat number, renamed firmware proto version to compat | Josh Blum | 2010-08-09 | 5 | -16/+28 |
| | | |||||
| * | Merge branch 'uhd_fpga_features' | Josh Blum | 2010-08-09 | 2 | -3/+6 |
| |\ | |||||
| | * | Merge branch 'features' into uhd_fpga_features | Josh Blum | 2010-08-09 | 2 | -3/+6 |
| | |\ | |||||
| | | * | added compat number to usrp2 readback mux | Josh Blum | 2010-08-09 | 1 | -2/+5 |
| | | | | |||||
| | | * | makefile dependency fix for second expansion | Josh Blum | 2010-08-09 | 1 | -1/+1 |
| | | | | |||||
| * | | | Merge branch 'images' | Josh Blum | 2010-08-09 | 4 | -0/+150 |
| |\ \ \ | | |/ / | |/| | | |||||
| | * | | uhd-images: created makefile and cmake packager for the images | Josh Blum | 2010-08-06 | 4 | -0/+150 |
| | | | | |||||
* | | | | usrp: needed default constructor for MSVC, fixed gain group float warnings | Josh Blum | 2010-08-11 | 2 | -3/+4 |
|/ / / | |||||
* | | | Merge branch 'features' into uhd_fpga_features | Josh Blum | 2010-08-09 | 23 | -5878/+873 |
|\ \ \ | | |/ | |/| | | | | | | | Conflicts: fpga/usrp2/vrt/vita_rx_control.v | ||||
| * | | provide a way to get out of the error state without processor intervention | Matt Ettus | 2010-07-29 | 1 | -1/+4 |
| | | | |||||
| * | | sequence number reset upon programming streamid | Matt Ettus | 2010-07-28 | 2 | -5/+11 |
| | | | |||||
| * | | attempt at avoiding infinite error messages | Matt Ettus | 2010-07-28 | 1 | -5/+14 |
| | | | |||||
| * | | implemented "next packet" and "next burst" policies | Matt Ettus | 2010-07-28 | 3 | -24/+50 |
| | | | |||||
| * | | sequence errors can happen on start of burst as well. | Matt Ettus | 2010-07-28 | 1 | -1/+1 |
| | | | |||||
| * | | more informative error codes | Matt Ettus | 2010-07-28 | 2 | -6/+8 |
| | | | |||||
| * | | cleaner error handling | Matt Ettus | 2010-07-28 | 1 | -27/+28 |
| | | | |||||
| * | | introduce new error types | Matt Ettus | 2010-07-28 | 3 | -34/+80 |
| | | | |||||
| * | | test mux and gen_context_pkt | Matt Ettus | 2010-07-28 | 1 | -3/+22 |
| | | | |||||
| * | | this is an output file, it shouldn't be checked in | Matt Ettus | 2010-07-28 | 1 | -5506/+0 |
| | | | |||||
| * | | insert protocol engine flags when requested | Matt Ettus | 2010-07-28 | 1 | -2/+6 |
| | | | |||||
| * | | move the streamid so it isn't at the same address as clear_state | Matt Ettus | 2010-07-28 | 2 | -2/+2 |
| | | | |||||
| * | | connect the demux | Matt Ettus | 2010-07-28 | 1 | -1/+1 |
| | | | |||||
| * | | fix a typo | Matt Ettus | 2010-07-28 | 3 | -4/+4 |
| | | | |||||
| * | | tx error packets now muxed into the ethernet stream back to the host | Matt Ettus | 2010-07-28 | 4 | -47/+66 |
| | | | |||||
| * | | checkpoint. New context packet generator to report underruns and other errors | Matt Ettus | 2010-07-28 | 2 | -0/+107 |
| | | | |||||
| * | | move declaration ahead of use | Matt Ettus | 2010-07-19 | 1 | -5/+5 |
| | | | |||||
| * | | put run_tx and run_rx on the displayed LEDs | Matt Ettus | 2010-07-19 | 1 | -3/+4 |
| | | | |||||
| * | | remove warnings | Matt Ettus | 2010-07-16 | 2 | -3/+3 |
| | | | |||||
| * | | add mux and demux to build | Matt Ettus | 2010-07-15 | 1 | -0/+2 |
| | | | |||||
| * | | mux multiple fifo streams into one. Allows priority or round robin | Matt Ettus | 2010-07-15 | 1 | -0/+57 |
| | | | |||||
| * | | split fifo into 2 streams based on first line in each packet | Matt Ettus | 2010-07-15 | 1 | -0/+50 |
| | | | |||||
| * | | Merge branch 'reload' into ise12 | Matt Ettus | 2010-07-15 | 4 | -22/+59 |
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * reload: fix to stop endless error packets updated tests to match new features error packets are now valid Extension Context packets error packets don't have a trailer any more streamid is now optional on data packets, set by header register trailer now has a bit to indicate successful End-of-burst hard-coded some header bits to correct values to ensure valid packets reload bit for vita rx ctrl | ||||
| | * | | fix to stop endless error packets | Matt Ettus | 2010-07-09 | 1 | -2/+2 |
| | | | | |||||
| | * | | updated tests to match new features | Matt Ettus | 2010-07-09 | 2 | -4/+9 |
| | | | | |||||
| | * | | error packets are now valid Extension Context packets | Matt Ettus | 2010-07-08 | 1 | -11/+32 |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | error packets don't have a trailer any more streamid is now optional on data packets, set by header register trailer now has a bit to indicate successful End-of-burst hard-coded some header bits to correct values to ensure valid packets | ||||
| | * | | reload bit for vita rx ctrl | Josh Blum | 2010-07-05 | 1 | -5/+16 |
| | | | | |||||
| * | | | Merge branch 'ise12' of ettus.sourcerepo.com:ettus/fpgapriv into ise12 | Matt Ettus | 2010-07-12 | 0 | -0/+0 |
| |\ \ \ | | | | | | | | | | | | | | | | * 'ise12' of ettus.sourcerepo.com:ettus/fpgapriv: | ||||
| | * | | | Merge branch 'master' into ise12 | Matt Ettus | 2010-07-05 | 1 | -4/+5 |
| | |\| | | | | | | | | | | | | | | | | | | | | | | * master: fix bug which caused serdes fifo to disappear | ||||
| * | | | | Merge branch 'master' into ise12 | Matt Ettus | 2010-07-12 | 1 | -4/+5 |
| |\ \ \ \ | | |/ / / | |/| / / | | |/ / | | | | | * master: fix bug which caused serdes fifo to disappear | ||||
| * | | | Merge branch 'master' into ise12 | Matt Ettus | 2010-06-18 | 1 | -1/+2 |
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | * master: proper dependency tracking for the makefile | ||||
| * | | | | precompute udp checksums | Matt Ettus | 2010-06-15 | 1 | -5/+14 |
| | | | | | |||||
| * | | | | barely fails timing on gigE/10 and gigE/12, larger fail on udp/10, but all | Matt Ettus | 2010-06-14 | 7 | -275/+390 |
| | | | | | | | | | | | | | | | | | | | | seem to work ok |