| Commit message (Expand) | Author | Age | Files | Lines |
... | |
| | | * | | | don't flag an error on eob ack | Matt Ettus | 2010-11-11 | 1 | -1/+1 |
| | | * | | | proper triggering for interrupts generated on the dsp_clk | Matt Ettus | 2010-11-11 | 1 | -1/+8 |
| | | * | | | cleanup for 32 bit seqnum | Matt Ettus | 2010-11-11 | 1 | -4/+3 |
| | | * | | | increase compatibility number for flow control | Matt Ettus | 2010-11-11 | 1 | -1/+1 |
| | | * | | | switch to 32 bit sequence numbers. Will wrap in ~15 hours at max rate | Matt Ettus | 2010-11-11 | 3 | -14/+16 |
| | | * | | | send message on eob to ack the end of transmission | Matt Ettus | 2010-11-11 | 1 | -1/+6 |
| | | * | | | typo which isn't caught by xilinx | Matt Ettus | 2010-11-11 | 1 | -1/+1 |
| | | * | | | separated flow control and error reporting on tx path. should work with and ... | Matt Ettus | 2010-11-11 | 4 | -25/+43 |
| | | * | | | go to the correct state | Matt Ettus | 2010-11-11 | 1 | -3/+3 |
| | | * | | | add a fifo to the end of the mux to help in timing. | Matt Ettus | 2010-11-11 | 1 | -6/+13 |
| | | * | | | add trigger to makefile | Matt Ettus | 2010-11-11 | 1 | -0/+1 |
| | | * | | | assign setting reg addresses | Matt Ettus | 2010-11-11 | 1 | -2/+2 |
| | | * | | | declarations | Matt Ettus | 2010-11-11 | 1 | -2/+3 |
| | | * | | | checkpoint in flow control packet generation | Matt Ettus | 2010-11-11 | 5 | -42/+147 |
| | | * | | | these got dropped during the rebase | Matt Ettus | 2010-11-11 | 4 | -31/+37 |
| | | * | | | Removed 'ifdef for second DCM that was a deign idea for external SRAM on u2pl... | Ian Buckley | 2010-11-11 | 1 | -49/+4 |
| | | * | | | 1) Created new FIFO IP in Coregen. 512x36 dual clcok FIFO with programable fu... | Ian Buckley | 2010-11-11 | 11 | -11/+555 |
| | | * | | | 1) u2p has added a new signal from the SRAM to the pinout, RAM_ZZ | Ian Buckley | 2010-11-11 | 4 | -11/+17 |
| | | * | | | Defaulted all SRAM pins to LVCMOS25 8mA FAST | Ian Buckley | 2010-11-11 | 1 | -67/+67 |
| | | * | | | Placed 2nd DCM into `ifdef DCM_FOR_RAMCLK which is dissabled by default | Ian Buckley | 2010-11-11 | 2 | -7/+23 |
| | | * | | | Added external RAM FIFO to u2plus. | Ian Buckley | 2010-11-11 | 20 | -100/+4498 |
| | | * | | | revert unneeded changes and incorrect comments | Matt Ettus | 2010-11-11 | 2 | -34/+34 |
| | | * | | | reconnect GPIOs, remove debug pins, meets timing now | Matt Ettus | 2010-11-11 | 1 | -5/+3 |
| | | * | | | Modified phase shift of DCM1 to -64 which is intended to give more timing mar... | Ian Buckley | 2010-11-11 | 1 | -1/+1 |
| | | * | | | Enabled phase offset adjustment on DCM_INST1 which drives the external Fast S... | Ian Buckley | 2010-11-11 | 1 | -12/+12 |
| | | * | | | Added to DCM's and some BUFG's to align the internal 125MHz clock edge with i... | Ian Buckley | 2010-11-11 | 4 | -5/+100 |
| | | * | | | Enhanced test bench to be more like real world application | Ian Buckley | 2010-11-11 | 2 | -7/+14 |
| | | * | | | hangedddddddextrnal fifo size to use full NoBL SRAM | ianb | 2010-11-11 | 1 | -1/+1 |
| | | * | | | Corrected extfifo code so that all registers that are on SRAM signals are pac... | ianb | 2010-11-11 | 5 | -46/+59 |
| | | * | | | capacity logic fix | Matt Ettus | 2010-11-11 | 1 | -1/+1 |
| | | * | | | Added capacity to the module pinout | Ian Buckley | 2010-11-11 | 1 | -3/+4 |
| | | * | | | Added a bunch of debug signals. | Ian Buckley | 2010-11-11 | 4 | -9/+19 |
| | | * | | | Regenerated FIFO with lower trigger level for almost full flag to reflect log... | Ian Buckley | 2010-11-11 | 8 | -236/+113 |
| | | * | | | Regenerated FIFO's for extfifo. | Ian Buckley | 2010-11-11 | 11 | -726/+15 |
| | | * | | | Edited FIFO instance to delete port that was not regenerated after reconfigur... | Ian Buckley | 2010-11-11 | 1 | -1/+0 |
| | | * | | | Adding in files that probably didn;t exist in the ISE10.1 version of coregen | Ian Buckley | 2010-11-11 | 5 | -0/+808 |
| | | * | | | Bringing all coregen files checked in into sync | Ian Buckley | 2010-11-11 | 10 | -137/+60 |
| | | * | | | Found bug due to not accounting for the correct number of possible in flight ... | Ian Buckley | 2010-11-11 | 7 | -52/+110 |
| | | * | | | checkin of generated coregen files | Matt Ettus | 2010-11-11 | 18 | -8/+556 |
| | | * | | | External FIFO tested in simulation and on USRP2 from decimation 64->8 with cu... | Ian Buckley | 2010-11-11 | 18 | -236/+7297 |
| | | * | | | Checkpoint checkin. | Ian Buckley | 2010-11-11 | 13 | -0/+1507 |
| | | * | | | get it to build | Matt Ettus | 2010-11-11 | 5 | -5/+309 |
| | | * | | | moved forward from the old branch | Matt Ettus | 2010-11-11 | 8 | -4/+876 |
| | | * | | | reverting part of the reversion of the spi settings. | Matt Ettus | 2010-11-10 | 1 | -2/+2 |
| | | * | | | u2p needs the bigger regs for some reason | Matt Ettus | 2010-11-10 | 1 | -4/+4 |
| | | * | | | need to enable both 16 and 32 bit spi interfaces -- 16 used in u1e, 32 in u2 ... | Matt Ettus | 2010-11-10 | 1 | -0/+1 |
| | | * | | | occ needs to be 2 bits wide on a 36 bit fifo interface. | Matt Ettus | 2010-11-10 | 1 | -1/+2 |
| | | * | | | Merge branch 'u1e' into merge_u1e | Matt Ettus | 2010-11-10 | 64 | -215/+3325 |
| | | |\ \ \ |
|
| | | | * | | | invert led signals because they are active low | Matt Ettus | 2010-11-09 | 1 | -1/+1 |
| | | | * | | | duh | Matt Ettus | 2010-11-04 | 1 | -1/+1 |