aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* time_spec: include <stdint.h> for int64_tMichael Dickens2018-12-131-0/+1
| | | | | + needed on some older OS / compilers; + won't hurt newer ones that already include this header.
* various: use "std::abs" instead of "std::fabs"Michael Dickens2018-12-124-15/+15
| | | | | | + better compiler compatibility + let the compiler figure out the actual function IO signature that makes sense, instead of forcing float.
* responder: Better "abs()" compiler compatibilityMichael Dickens2018-12-122-2/+2
| | | | Use "std::abs" instead of "abs" for better compiler compatibility
* lmx2592: Better "abs()" compiler compatibilityMichael Dickens2018-12-121-3/+3
| | | | Use "std::abs" instead of "abs" for better compiler compatibility
* rh: add highband spur reduction optionMark Meserve2018-12-125-4/+88
| | | | | | | | | - When highband_spur_reduction is enabled, the lowband LO will be disabled during highband operation. This improves spur performance, but also renders timed tune commands unusable due to the MPM call. - A warning is logged if the user uses a timed tune command that would change the state of the lowband LO, as the MPM call will occur immediately instead of at the given command time.
* rh: remove polarity setting for sdclkout11Mark Meserve2018-12-121-2/+2
| | | | - output 11 is unused, a value of 0 will leave the polarity as normal
* rh: add functions to toggle lowband loMark Meserve2018-12-122-0/+20
|
* TwinRX: Make routing to LO1 and LO2 mutually exclusivemichael-west2018-12-102-25/+15
|
* TwinRX: Enable phase resync on ADF535xmichael-west2018-12-101-17/+9
|
* TwinRX: Tuning improvementsmichael-west2018-12-103-17/+20
| | | | | | - Added delay for VTUNE calibration as per ADF5355 and ADF5356 data sheets - Increased SPI clock to 10 MHz - Removed write to register 10 during tuning of ADF5356 to match ADF5355 code and reduce tune time
* TwinRX: Fix initializationmichael-west2018-12-101-62/+60
| | | | | | | - Reordered initialization - Fixed issue where LO2 initialization data was being written to LO1 - Moved SPI config to be a member variable so it is not constantly re-created - Changed SPI clock divider from hard-coded value to a calculation based on CODEC rate
* rh: fixed lowband tuningMark Meserve2018-12-071-1/+2
| | | | - Sometimes, SW1 was not updated when a switch to lowband occurred.
* cmake: use "MATCHES" instead of "STREQUAL" for "Clang"Michael Dickens2018-12-071-3/+3
| | | | + allows proper building with both AppleClang and native Clang.
* uhd: Fix log statement for Port number on RFNOC blockSugandha Gupta2018-12-051-1/+1
| | | | | CE is display in decimal format and Port number will be displayed in Hex, as it represents Block Port on the crossbar
* rh: add handling for "all" loMark Meserve2018-12-042-9/+104
| | | | | | | - Adds "all" LO properties. - Adds handling of "all" value in all LO functions. - Re-adds value_error exceptions for illegal settings of LO2, which previously caused issues when the "all" LO was used from multi_usrp.
* examples: rfnoc_radio_loopback: Clean up exampleMartin Braun2018-12-031-15/+11
| | | | | | | | | | - Remove unnecessary Boostisms - Remove unecessary thread priority (this example doesn't actually do anything that requires high thread priority) - Used auto in some places to increase readability - Fixed some compiler warnings No functional changes.
* mg: Unindent falsely indented block of codeMartin Braun2018-11-301-29/+29
| | | | Whitespace changes only.
* e320: Fix return value of get_fpga_typeSugandha Gupta2018-11-301-3/+3
| | | | | | Return value should be fpga image type and not sfp type, fixes a bug with uhd_image_loader while trying to update XG and AA images
* images: Add N3xx CPLD file to manifestMartin Braun2018-11-291-1/+1
| | | | | This will allow uhd_images_downloader to pull the file. Also, it will enable automatic updating for meta-ettus by referencing the manifest.
* docs: python: add documentation on GIL releaseBrent Stapleton2018-11-291-0/+23
| | | | | Adding documentation explaining where the Python API releases the Python GIL, and what that means for users.
* rh: Enable clock synchronization error checkingHumberto Jimenez2018-11-291-7/+3
|
* rh: add support for atr frontend controlMark Meserve2018-11-295-92/+103
|
* cmake: Properly register devtestMartin Braun2018-11-291-1/+3
| | | | | If N300 or E320 is disabled, the appropriate devtests are no longer registered.
* python: Add sync source to Python APIBrent Stapleton2018-11-292-0/+41
| | | | Exposing getters, setters, and options for multi_usrp sync source.
* images: Update manifest with Rhodium imagesAlex Williams2018-11-281-0/+1
|
* e300: Type-cast fix for boostAndreas Müller2018-11-281-1/+1
| | | | | | | Fixes compiler errors on newer Boost. boost::posix_time::microseconds() requires a int64_t. Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
* filter: Fix return value in get_rolloffDerek Kozel2018-11-281-1/+1
|
* rfnoc: Add halt to replay APIWade Fife2018-11-273-1/+12
| | | | | The HALT feature allows a command that takes a long time to run to be stopped while it is in progress.
* rfnoc: Fix default SPP for replayWade Fife2018-11-271-4/+3
| | | | Consolidate two constants for default replay packet size down to one.
* RFNoC: Fix replay example port argsWade Fife2018-11-271-3/+3
|
* mpm: rh: Remove n321 overlayAlex Williams2018-11-271-1/+0
| | | | | | The n321 overlay is no longer needed. The devices have been added to the n320 overlay because the kernel cannot tear down multiple overlays reliably.
* Docs: Adjust E310 functional verification testsmichael-west2018-11-261-10/+10
| | | | The sample rates and the interpolation/decimation limits didn't match.
* x3xx: implement rfnoc get antenna functionsMark Meserve2018-11-262-0/+16
|
* utils: specify the downloader's Python executableBrent Stapleton2018-11-261-1/+1
| | | | | | | | | | Change the uhd_images_downloader's first line to execute with a runtime Python interpreter, as determined at UHD build time. Users can still use an arbitrary Python executable by calling `python uhd_images_downloader` This will fix our embedded products by ensuring that we call Python3 when running uhd_images_downloader in embedded mode.
* cmake: python: adding RUNTIME_PYTHON_EXECUTABLEBrent Stapleton2018-11-261-1/+15
| | | | | | Adding a CMake variable to set the runtime Python interpreter. This will default to PYTHON_EXECUTABLE, which is the build time Python interpreter.
* n3xx: Change init() procedure to reduce configuration timeHumberto Jimenez2018-11-261-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | Previously, the init() procedure of the n3xx class passed either the user-provided or the default clock_source and time_source values to initialize the clocking configuration. When the user did not provide these parameters, the default values were assigned, overriding whatever configuration the device was previously initialized with. Therefore, a dboard reinit was forced when the currently configured state of the N3xx device did not match the default configuration (i.e. internal sources). Now, the init() procedure still provides the clock_source and time_source values; but, if the user does not provide the parameters, the previously used values are assigned (i.e. self._clock_source and/or self._time_source). By the time MPM runs this n3xx init() procedure for the first time, both self._clock_source and self._time_source have been initialized with the default internal values anyways in the _init_ref_clock_and_time() procedure. This change prevents additional, unnecessary calls to the set_sync_source() procedure, which ultimately causes a daughterboard reinitialization when either a new clock or time source is requested.
* rh: Fix update_ref_clock_freq() to update init argsHumberto Jimenez2018-11-261-0/+3
| | | | | | The update_ref_clock_freq() procedure now updates the self._init_args value of the Rhodium class daugtherboard objects in MPM to propagate the latest user-selected arguments for future reference.
* x300: fixup minimum master clock rateBrent Stapleton2018-11-211-1/+1
| | | | | Recent clocking changes set the minimum master clock rate to 187.5MHz, instead of the actual 184.32MHz. This change corrects that.
* multi_usrp: Fixed get_tx_stream referenceGregory Eslinger2018-11-201-1/+1
|
* uhd: fix rx antenna not being applied in txrx exampleMark Meserve2018-11-161-2/+3
|
* rh: fix typo in lo distribution propertiesMark Meserve2018-11-161-2/+2
|
* rh: fix typo in set_clk_safe_stateMark Meserve2018-11-161-1/+1
|
* mpmd: add fpga_vesion_hash infoTrung Tran2018-11-161-0/+2
|
* mpm: add fpga githash to device infoTrung Tran2018-11-161-0/+2
|
* tests: Retrofit sph test to use new mock transportCiro Nishiguchi2018-11-165-201/+293
|
* utils: uhd_images_downloader: Add --http-proxy optionMartin Braun2018-11-161-2/+11
| | | | | | | | | | | | This lets the user specify a HTTP proxy. The environment variable HTTP_PROXY is still usable, but --http-proxy will override it. Example: $ uhd_images_downloader \ --http-proxy http://user:pass@10.20.30.40:3128 \ -t x310 Here, the tool will download all the images matching 'x310' using a proxy at 10.20.30.40.
* mpmd: Improve error message for compat number mismatchesMartin Braun2018-11-161-6/+14
|
* x300: New mode to configure master clock rateScott Torborg2018-11-163-10/+104
| | | | | | | | Add a new clocking mode to automatically configure arbitrary master clock rates. Co-authored-by: Brent Stapleton <brent.stapleton@ettus.com> Co-authored-by: Martin Braun <martin.braun@ettus.com>
* cmake: Improve logic for UHD_IMAGES_DIRA. Maitland Bottoms2018-11-151-2/+0
| | | | | A CMake option is either On or Off. UHD_IMAGES_DIR gets a sane default if not specified on the CMake command line.
* cmake: Add SOURCE_DATE_EPOCHA. Maitland Bottoms2018-11-151-0/+5
| | | | | Reproducible builds set SOURCE_DATE_EPOCH rather than arbitrary build timestamps. Use it if set, otherwise revert to the old way.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 05:19:01 +0000