summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* dsp rework: u2_core test implementationJosh Blum2012-01-2613-446/+49
|
* n2xx: updated bootloader to latest build in uhd masterJosh Blum2012-01-111-377/+377
|
* usrp2/nseries: restored clock/serdes readbackJosh Blum2011-11-232-4/+4
|
* need more umph out of correction valuesJosh Blum2011-11-106-8/+8
|
* remove unused irq to meet timingJosh Blum2011-11-052-21/+7
|
* convenience makefiles for top level projectsJosh Blum2011-11-052-0/+31
|
* increase vita rx fifosize to 10, like USRP2, make things workJosh Blum2011-11-042-4/+4
|
* dsp: remove dsp_buffer and replace with simpler add_routing_header,Matt Ettus2011-11-043-3/+50
| | | | other funcs of dsp_buffer are done by double_buffer and dsp_engine
* dsp: remove warningsMatt Ettus2011-11-042-4/+6
|
* u1e: fix unattached nets from copy-paste errorMatt Ettus2011-11-041-3/+3
|
* b100: fix warnings, complete removal of test codeMatt Ettus2011-11-042-16/+7
|
* b100: remove test features from GPIF to save spaceMatt Ettus2011-11-042-82/+9
|
* u1e/u1p: GPIOs switched over to setting regsMatt Ettus2011-10-272-32/+45
|
* forgot to add gpio atr to makefile source listJosh Blum2011-10-261-0/+1
|
* 32 bit compat number for E and B seriesJosh Blum2011-10-262-10/+8
|
* u1e/u1p: removed led setting regMatt Ettus2011-10-262-14/+4
|
* u1p/u1e: partially redone atr and gpio redoMatt Ettus2011-10-262-33/+11
|
* u2/u2p: use new setting_reg based gpios, gets it off of wbMatt Ettus2011-10-263-17/+98
|
* u1e/u1p: remove unused UARTMatt Ettus2011-10-262-24/+0
|
* u2/u2p: move nearly all setting regs onto dsp_clkMatt Ettus2011-10-262-30/+37
|
* u2/u2p: remove dead comments and codeMatt Ettus2011-10-262-84/+16
|
* dsp: make rounding a single bit work againMatt Ettus2011-10-261-5/+13
|
* dsp: new rounding. more complex, but better propertiesMatt Ettus2011-10-262-3/+80
|
* dsp_engine: don't use SD rounding in 8 bit mode, so we can have a flat noise ↵Matt Ettus2011-10-262-4/+5
| | | | floor.
* dsp_engine: trailer change to fit standardMatt Ettus2011-10-261-2/+2
|
* dsp_engine fix rst -> reset, default to read addressMatt Ettus2011-10-262-3/+3
|
* dspengine: move the register to VITA_RX_CTRL + 9 instead of + 3 which is ↵Matt Ettus2011-10-261-1/+1
| | | | occupied
* dspengine: insert into the rx chainMatt Ettus2011-10-264-2/+29
|
* dsp_engine: new way of doing DSP operations on VITA packets. Example does ↵Matt Ettus2011-10-267-3/+899
| | | | 16 to 8 bit conversion
* dsp: ability to set rx dc offset to a fixed valueMatt Ettus2011-10-261-1/+2
|
* usrp2: fix typo in top level core filesJosh Blum2011-10-262-2/+2
|
* connect and map b100 and e100 front-panel ledsJosh Blum2011-10-112-2/+2
|
* usrp1: copy regs files into common and fix include pathsJosh Blum2011-09-2812-20/+393
|
* E100: GPSDO serial port level conversionNick Foster2011-09-282-2/+9
|
* B100: use gpif_misc on R2 hw, invert direction of gpif_misc pinsNick Foster2011-09-191-2/+2
|
* u1e,u1p: turn off debug pins, misc cleanupsMatt Ettus2011-09-082-26/+10
|
* u1p: proper format in ucf fileMatt Ettus2011-09-085-4/+474
| | | | u1p: build separate u1plus (prototypes) and B100 (release)
* u1e: relax GPMC constraints, eases P&RMatt Ettus2011-09-021-10/+10
|
* u1e: separate build for E100 and E110, just a different FPGAMatt Ettus2011-09-012-1/+102
|
* e100: squashed work on bus implementation on GPMCJosh Blum2011-08-2922-984/+545
|
* fix warning on dat_o in atr_controller16.vJosh Blum2011-08-291-3/+2
|
* fpga: minor tweaks to build systemJosh Blum2011-08-262-2/+4
|
* fix typoMatt Ettus2011-08-261-21/+21
|
* all: tie unused ram inputs to 1 instead of zero, helps routingMatt Ettus2011-08-262-22/+22
|
* b100: gpif_rst resynced to gpif_clkMatt Ettus2011-08-261-1/+1
|
* dsp: slow down the time constant of the DC offset correction by a factor of ↵Matt Ettus2011-08-261-1/+1
| | | | 16. it may need to be even slower.
* usrp2: reconnect frontend calibration, timing meetsJosh Blum2011-08-265-6/+6
|
* e100: continuation of the atr fix to get e100 to buildJosh Blum2011-08-151-2/+2
|
* usrp2: bump FPGA minor number to 2 for patch releaseJosh Blum2011-08-152-2/+2
|
* connect unused BRAM inputs to 1s to save routing logicJosh Blum2011-08-151-1/+1
|
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 10:33:05 +0000