summaryrefslogtreecommitdiffstats
Commit message (Expand)AuthorAgeFilesLines
* uhd: some build system tweaksJosh Blum2011-05-172-39/+42
* USRP1: implement MBOARD_PROP_CLOCK_CONFIG, only accepts internalJosh Blum2011-05-162-2/+11
* E100: fix aux codec ADC reads as per USRP1 in 6f70d1Nick Foster2011-05-161-40/+26
* uhd: replace managed buffer shared pointer w/ intrusive pointer to reduce ove...Josh Blum2011-05-146-51/+39
* usrp1: correct TX codec rate, it should also read 64e6 when probedJosh Blum2011-05-142-17/+11
* usrp1: apply conditional disables/enables to rx and txJosh Blum2011-05-147-9/+60
* uhd: add gcc warning for sign comparison mismatchJosh Blum2011-05-141-0/+2
* Merge branch 'tvrx2'Josh Blum2011-05-136-0/+2464
|\
| * Added TVRX2 supportJason Abele2011-05-136-0/+2464
* | uhd: init log file lock ptr to nullJosh Blum2011-05-131-0/+4
* | uhd: work on logging and message facility initializationJosh Blum2011-05-133-68/+78
* | usrp-e100: use misc test32 register to store fpga hashJosh Blum2011-05-102-39/+34
|/
* usrp-e100: created device address arg for master clock rate, removed eeprom hackJosh Blum2011-05-126-62/+19
* usrp-e100: added soft sync for ad9522 clock controlJosh Blum2011-05-091-2/+12
* usrp_e100: work w/ ad9522 clock configurationJosh Blum2011-05-081-2/+18
* Make log locking work with picky boostJason Abele2011-05-051-4/+5
* usrp1: overload read_eeprom to handle multi-byte readsJosh Blum2011-05-052-1/+11
* usrp1: added more logging to usrp1 iface for debuggingJosh Blum2011-05-051-0/+20
* uhd: various tweaks to log and msg, replaced a few remaining stdioJosh Blum2011-05-0410-25/+27
* uhd: removed more iostream stuff from usrp* implementationsJosh Blum2011-05-0420-110/+110
* usrp-e100: removed stdio prints from implementationJosh Blum2011-05-048-82/+88
* uhd: replaced warning post with calls to UHD_MSG(warning)Josh Blum2011-05-0429-117/+281
* uhd: added interprocess file lock to the logger fileJosh Blum2011-05-041-3/+30
* uhd: replaced many conditional prints with UHD_LOG usageJosh Blum2011-05-048-32/+28
* uhd: tweaks for logger file entriesJosh Blum2011-05-042-14/+30
* usrp: replaced conditional dboard debug prints w/ UHD_LOGV(often)Josh Blum2011-05-049-89/+68
* uhd: moved the logger into the utils subdirJosh Blum2011-05-046-6/+10
* uhd: added configurable default log level and thread safetyJosh Blum2011-05-042-9/+80
* uhd: work on the backend for a logging facilityJosh Blum2011-05-044-0/+199
* usrp2: added REF_MIMO and PPS_MIMO for USRP2 clock configJosh Blum2011-05-032-15/+25
* Merge branch 'rfx_rssi'Josh Blum2011-05-022-6/+30
|\
| * Added RSSI sensor for RFX series (not rfx400)Jason Abele2011-05-022-6/+30
* | Added docs for sbxJason Abele2011-05-021-0/+39
|/
* usrp1: toggle the FPGA reset and RX reset registers at initJosh Blum2011-05-011-8/+18
* usrp-e100: shrink name field to git mcr into eepromJosh Blum2011-04-201-2/+3
* USRP1: added support for setting clock rate from EEPROMJosh Blum2011-05-016-14/+67
* usrp-e100: add ability to set/get default master clock rate from EEPROMJosh Blum2011-05-015-14/+59
* uhd: fixed typo in tune request/result inter_freq -> rf_freqJosh Blum2011-05-015-41/+37
* usrp2: use default mtu as upper limit unless user specifiesJosh Blum2011-04-301-11/+12
* usrp2: move card burner code out of get_options so get_options can be used by...Josh Blum2011-04-291-8/+8
* usrp2: allow devices to be discovered when usrp2_iface::make throwsJosh Blum2011-04-291-12/+16
* usrp2: added support for GPSDO configuration bits in EEPROMJosh Blum2011-04-293-5/+86
* GPS parser fixes for get_time.Nick Foster2011-04-292-7/+5
* USRP2/N210: firmware UART read no longer drops 20th charNick Foster2011-04-291-6/+8
* USRP2: enable GPS by defaultNick Foster2011-04-291-3/+3
* USRP2: Added GPS time support to the sensors interface. gps_time sensor retur...Nick Foster2011-04-293-1/+15
* N210: implemented mboard sensors for ref lock and MIMO lockNick Foster2011-04-294-1/+28
* uhd: make benchmark example take a rate, and give special warning for usrp1Josh Blum2011-04-291-17/+22
* usrp2: card burner protections when the user specifies a device not in the listJosh Blum2011-04-281-2/+12
* usrp2: include dd.exe in windows installersJosh Blum2011-04-283-0/+15
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 07:50:53 +0000