diff options
Diffstat (limited to 'usrp2')
-rw-r--r-- | usrp2/top/B100/Makefile | 14 | ||||
-rw-r--r-- | usrp2/top/B100/u1plus.ucf | 203 | ||||
-rw-r--r-- | usrp2/top/B100/u1plus.v | 173 |
3 files changed, 0 insertions, 390 deletions
diff --git a/usrp2/top/B100/Makefile b/usrp2/top/B100/Makefile deleted file mode 100644 index 3ddef1024..000000000 --- a/usrp2/top/B100/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# Copyright 2011 Ettus Research LLC -# - -all: B100 - find -name "*.twr" | xargs grep constraint | grep met - -clean: - rm -rf build* - -B100: - make -f Makefile.$@ bin - -.PHONY: all clean diff --git a/usrp2/top/B100/u1plus.ucf b/usrp2/top/B100/u1plus.ucf deleted file mode 100644 index 3ecc4daf2..000000000 --- a/usrp2/top/B100/u1plus.ucf +++ /dev/null @@ -1,203 +0,0 @@ -## Main Clock -NET "CLK_FPGA_P" LOC = "R7" ; -NET "CLK_FPGA_N" LOC = "T7" ; - -## UART -NET "FPGA_TXD" LOC = "H16" ; -NET "FPGA_RXD" LOC = "H12" ; - -## I2C -NET "SDA_FPGA" LOC = "T13" ; -NET "SCL_FPGA" LOC = "R13" ; - -## CGEN -NET "cgen_st_ld" LOC = "M13" ; -NET "cgen_st_refmon" LOC = "J14" ; -NET "cgen_st_status" LOC = "P6" ; -NET "cgen_ref_sel" LOC = "T2" ; -NET "cgen_sync_b" LOC = "H15" ; - -## FPGA Config -#NET "fpga_cfg_din" LOC = "T14" ; -#NET "fpga_cfg_cclk" LOC = "R14" ; -#NET "fpga_cfg_init_b" LOC = "T12" ; - -## MISC -#NET "mystery_bus<2>" LOC = "T11" ; -#NET "mystery_bus<1>" LOC = "C4" ; -#NET "mystery_bus<0>" LOC = "E7" ; -NET "reset_n" LOC = "D5" ; -NET "PPS_IN" LOC = "M14" ; -NET "reset_codec" LOC = "B14" ; - -## GPIF -NET "GPIF_D<15>" LOC = "P7" ; -NET "GPIF_D<14>" LOC = "N8" ; -NET "GPIF_D<13>" LOC = "T5" ; -NET "GPIF_D<12>" LOC = "T6" ; -NET "GPIF_D<11>" LOC = "N6" ; -NET "GPIF_D<10>" LOC = "P5" ; -NET "GPIF_D<9>" LOC = "R3" ; -NET "GPIF_D<8>" LOC = "T3" ; -NET "GPIF_D<7>" LOC = "N12" ; -NET "GPIF_D<6>" LOC = "P13" ; -NET "GPIF_D<5>" LOC = "P11" ; -NET "GPIF_D<4>" LOC = "R9" ; -NET "GPIF_D<3>" LOC = "T9" ; -NET "GPIF_D<2>" LOC = "N9" ; -NET "GPIF_D<1>" LOC = "P9" ; -NET "GPIF_D<0>" LOC = "P8" ; - -NET "GPIF_CTL<3>" LOC = "N5" ; -NET "GPIF_CTL<2>" LOC = "M11" ; -NET "GPIF_CTL<1>" LOC = "M9" ; -NET "GPIF_CTL<0>" LOC = "M7" ; - -NET "GPIF_RDY<3>" LOC = "N11" ; -NET "GPIF_RDY<2>" LOC = "T10" ; -NET "GPIF_RDY<1>" LOC = "T4" ; -NET "GPIF_RDY<0>" LOC = "R5" ; - -NET "FX2_PA7_FLAGD" LOC = "P12" ; -NET "FX2_PA6_PKTEND" LOC = "R11" ; -NET "FX2_PA2_SLOE" LOC = "P10" ; - -NET "IFCLK" LOC = "T8" ; - -## LEDs -NET "debug_led<2>" LOC = "R2" ; -NET "debug_led<1>" LOC = "N4" ; -NET "debug_led<0>" LOC = "P4" ; - -## Debug bus -NET "debug_clk<0>" LOC = "K15" ; -NET "debug_clk<1>" LOC = "K14" ; -NET "debug<0>" LOC = "K16" ; -NET "debug<1>" LOC = "J16" ; -NET "debug<2>" LOC = "C16" ; -NET "debug<3>" LOC = "C15" ; -NET "debug<4>" LOC = "E13" ; -NET "debug<5>" LOC = "D14" ; -NET "debug<6>" LOC = "D16" ; -NET "debug<7>" LOC = "D15" ; -NET "debug<8>" LOC = "E14" ; -NET "debug<9>" LOC = "F13" ; -NET "debug<10>" LOC = "G13" ; -NET "debug<11>" LOC = "F14" ; -NET "debug<12>" LOC = "E16" ; -NET "debug<13>" LOC = "F15" ; -NET "debug<14>" LOC = "H13" ; -NET "debug<15>" LOC = "G14" ; -NET "debug<16>" LOC = "G16" ; -NET "debug<17>" LOC = "F16" ; -NET "debug<18>" LOC = "J12" ; -NET "debug<19>" LOC = "J13" ; -NET "debug<20>" LOC = "L14" ; -NET "debug<21>" LOC = "L16" ; -NET "debug<22>" LOC = "M15" ; -NET "debug<23>" LOC = "M16" ; -NET "debug<24>" LOC = "L13" ; -NET "debug<25>" LOC = "K13" ; -NET "debug<26>" LOC = "P16" ; -NET "debug<27>" LOC = "N16" ; -NET "debug<28>" LOC = "R15" ; -NET "debug<29>" LOC = "P15" ; -NET "debug<30>" LOC = "N13" ; -NET "debug<31>" LOC = "N14" ; - -## ADC -NET "adc<11>" LOC = "B15" ; -NET "adc<10>" LOC = "A8" ; -NET "adc<9>" LOC = "B8" ; -NET "adc<8>" LOC = "C8" ; -NET "adc<7>" LOC = "D8" ; -NET "adc<6>" LOC = "C9" ; -NET "adc<5>" LOC = "A9" ; -NET "adc<4>" LOC = "C10" ; -NET "adc<3>" LOC = "D9" ; -NET "adc<2>" LOC = "A3" ; -NET "adc<1>" LOC = "B3" ; -NET "adc<0>" LOC = "A4" ; -NET "RXSYNC" LOC = "D10" ; - -## DAC -NET "TXBLANK" LOC = "K1" ; -NET "TXSYNC" LOC = "J2" ; -NET "dac<0>" LOC = "J1" ; -NET "dac<1>" LOC = "H3" ; -NET "dac<2>" LOC = "J3" ; -NET "dac<3>" LOC = "G2" ; -NET "dac<4>" LOC = "H1" ; -NET "dac<5>" LOC = "N3" ; -NET "dac<6>" LOC = "M4" ; -NET "dac<7>" LOC = "R1" ; -NET "dac<8>" LOC = "P2" ; -NET "dac<9>" LOC = "P1" ; -NET "dac<10>" LOC = "M1" ; -NET "dac<11>" LOC = "N1" ; -NET "dac<12>" LOC = "M3" ; -NET "dac<13>" LOC = "L4" ; - -## TX DB -NET "io_tx<0>" LOC = "K4" ; -NET "io_tx<1>" LOC = "L3" ; -NET "io_tx<2>" LOC = "L2" ; -NET "io_tx<3>" LOC = "F1" ; -NET "io_tx<4>" LOC = "F3" ; -NET "io_tx<5>" LOC = "G3" ; -NET "io_tx<6>" LOC = "E3" ; -NET "io_tx<7>" LOC = "E2" ; -NET "io_tx<8>" LOC = "E4" ; -NET "io_tx<9>" LOC = "F4" ; -NET "io_tx<10>" LOC = "D1" ; -NET "io_tx<11>" LOC = "E1" ; -NET "io_tx<12>" LOC = "D4" ; -NET "io_tx<13>" LOC = "D3" ; -NET "io_tx<14>" LOC = "C2" ; -NET "io_tx<15>" LOC = "C1" ; - -## RX DB -NET "io_rx<0>" LOC = "D7" ; -NET "io_rx<1>" LOC = "C6" ; -NET "io_rx<2>" LOC = "A6" ; -NET "io_rx<3>" LOC = "B6" ; -NET "io_rx<4>" LOC = "E9" ; -NET "io_rx<5>" LOC = "A7" ; -NET "io_rx<6>" LOC = "C7" ; -NET "io_rx<7>" LOC = "B10" ; -NET "io_rx<8>" LOC = "A10" ; -NET "io_rx<9>" LOC = "C11" ; -NET "io_rx<10>" LOC = "A11" ; -NET "io_rx<11>" LOC = "D11" ; -NET "io_rx<12>" LOC = "B12" ; -NET "io_rx<13>" LOC = "A12" ; -NET "io_rx<14>" LOC = "A14" ; -NET "io_rx<15>" LOC = "A13" ; - -## SPI -#NET "SEN_AUX" LOC = "C12" ; -#NET "SCLK_AUX" LOC = "D12" ; -#NET "MISO_AUX" LOC = "J5" ; -NET "SCLK_CODEC" LOC = "K3" ; -NET "SEN_CODEC" LOC = "D13" ; -NET "MOSI_CODEC" LOC = "C13" ; -NET "MISO_CODEC" LOC = "G4" ; - -NET "MISO_RX_DB" LOC = "E6" ; -NET "SEN_RX_DB" LOC = "B4" ; -NET "MOSI_RX_DB" LOC = "A5" ; -NET "SCLK_RX_DB" LOC = "C5" ; - -NET "MISO_TX_DB" LOC = "J4" ; -NET "SEN_TX_DB" LOC = "N2" ; -NET "MOSI_TX_DB" LOC = "L1" ; -NET "SCLK_TX_DB" LOC = "G1" ; - -## Dedicated pins -#NET "TMS" LOC = "B2" ; -#NET "TDO" LOC = "B16" ; -#NET "TDI" LOC = "B1" ; -#NET "TCK" LOC = "A15" ; - -#NET "fpga_cfg_prog_b" LOC = "A2" ; -#NET "fpga_cfg_done" LOC = "T15" ; diff --git a/usrp2/top/B100/u1plus.v b/usrp2/top/B100/u1plus.v deleted file mode 100644 index 5e3200580..000000000 --- a/usrp2/top/B100/u1plus.v +++ /dev/null @@ -1,173 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -`timescale 1ns / 1ps -////////////////////////////////////////////////////////////////////////////////// - -module u1plus - (input CLK_FPGA_P, input CLK_FPGA_N, // Diff - output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk, - output FPGA_TXD, input FPGA_RXD, - - // GPIF - inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output [3:0] GPIF_RDY, - output FX2_PA7_FLAGD, output FX2_PA6_PKTEND, output FX2_PA2_SLOE, - input IFCLK, - - inout SDA_FPGA, inout SCL_FPGA, // I2C - - output SCLK_TX_DB, output SEN_TX_DB, output MOSI_TX_DB, input MISO_TX_DB, // DB TX SPI - output SCLK_RX_DB, output SEN_RX_DB, output MOSI_RX_DB, input MISO_RX_DB, // DB TX SPI - output SCLK_CODEC, output SEN_CODEC, output MOSI_CODEC, input MISO_CODEC, // AD9862 main SPI - - input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel, - - inout [15:0] io_tx, inout [15:0] io_rx, - - output [13:0] dac, output TXSYNC, output TXBLANK, - input [11:0] adc, input RXSYNC, - - input PPS_IN, - input reset_n, output reset_codec - ); - - assign reset_codec = 1; // Believed to be active low - - // ///////////////////////////////////////////////////////////////////////// - // Clocking - wire clk_fpga, clk_fpga_in, reset; - - IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) - clk_fpga_pin (.O(clk_fpga_in),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); - - BUFG clk_fpga_BUFG (.I(clk_fpga_in), .O(clk_fpga)); - - reset_sync reset_sync(.clk(clk_fpga), .reset_in(~reset_n), .reset_out(reset)); - - // ///////////////////////////////////////////////////////////////////////// - // SPI - wire mosi, sclk, miso; - assign { SCLK_TX_DB, MOSI_TX_DB } = ~SEN_TX_DB ? {sclk,mosi} : 2'b0; - assign { SCLK_RX_DB, MOSI_RX_DB } = ~SEN_RX_DB ? {sclk,mosi} : 2'b0; - assign { SCLK_CODEC, MOSI_CODEC } = ~SEN_CODEC ? {sclk,mosi} : 2'b0; - assign miso = (~SEN_TX_DB & MISO_TX_DB) | (~SEN_RX_DB & MISO_RX_DB) | - (~SEN_CODEC & MISO_CODEC); - - // ///////////////////////////////////////////////////////////////////////// - // TX DAC -- handle the interleaved data bus to DAC, with clock doubling DLL - - assign TXBLANK = 0; - wire [13:0] tx_i, tx_q; - - genvar i; - generate - for(i=0;i<14;i=i+1) - begin : gen_dacout - ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" - .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 - .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset - ODDR2_inst (.Q(dac[i]), // 1-bit DDR output data - .C0(clk_fpga), // 1-bit clock input - .C1(~clk_fpga), // 1-bit clock input - .CE(1'b1), // 1-bit clock enable input - .D0(tx_i[i]), // 1-bit data input (associated with C0) - .D1(tx_q[i]), // 1-bit data input (associated with C1) - .R(1'b0), // 1-bit reset input - .S(1'b0)); // 1-bit set input - end // block: gen_dacout - endgenerate - ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" - .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 - .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset - ODDR2_txsnc (.Q(TXSYNC), // 1-bit DDR output data - .C0(clk_fpga), // 1-bit clock input - .C1(~clk_fpga), // 1-bit clock input - .CE(1'b1), // 1-bit clock enable input - .D0(1'b0), // 1-bit data input (associated with C0) - .D1(1'b1), // 1-bit data input (associated with C1) - .R(1'b0), // 1-bit reset input - .S(1'b0)); // 1-bit set input - - // ///////////////////////////////////////////////////////////////////////// - // RX ADC -- handles deinterleaving - - reg [11:0] rx_i, rx_q; - wire [11:0] rx_a, rx_b; - - genvar j; - generate - for(j=0;j<12;j=j+1) - begin : gen_adcin - IDDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" - .INIT_Q0(1'b0), // Sets initial state of the Q0 output to 1’b0 or 1’b1 - .INIT_Q1(1'b0), // Sets initial state of the Q1 output to 1’b0 or 1’b1 - .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset - IDDR2_inst (.Q0(rx_a[j]), // 1-bit output captured with C0 clock - .Q1(rx_b[j]), // 1-bit output captured with C1 clock - .C0(clk_fpga), // 1-bit clock input - .C1(~clk_fpga), // 1-bit clock input - .CE(1'b1), // 1-bit clock enable input - .D(adc[j]), // 1-bit DDR data input - .R(1'b0), // 1-bit reset input - .S(1'b0)); // 1-bit set input - end // block: gen_adcin - endgenerate - - IDDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" - .INIT_Q0(1'b0), // Sets initial state of the Q0 output to 1’b0 or 1’b1 - .INIT_Q1(1'b0), // Sets initial state of the Q1 output to 1’b0 or 1’b1 - .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset - IDDR2_sync (.Q0(rxsync_0), // 1-bit output captured with C0 clock - .Q1(rxsync_1), // 1-bit output captured with C1 clock - .C0(clk_fpga), // 1-bit clock input - .C1(~clk_fpga), // 1-bit clock input - .CE(1'b1), // 1-bit clock enable input - .D(RXSYNC), // 1-bit DDR data input - .R(1'b0), // 1-bit reset input - .S(1'b0)); // 1-bit set input - - always @(posedge clk_fpga) - if(rxsync_0) - begin - rx_i <= rx_b; - rx_q <= rx_a; - end - else - begin - rx_i <= rx_a; - rx_q <= rx_b; - end - - // ///////////////////////////////////////////////////////////////////////// - // Main U1E Core - u1plus_core u1p_c(.clk_fpga(clk_fpga), .rst_fpga(reset), - .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk), - .debug_txd(FPGA_TXD), .debug_rxd(FPGA_RXD), - .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_rdy(GPIF_RDY), - .gpif_misc({FX2_PA7_FLAGD,FX2_PA6_PKTEND,FX2_PA2_SLOE}), - .gpif_clk(IFCLK), - - .db_sda(SDA_FPGA), .db_scl(SCL_FPGA), - .sclk(sclk), .sen({SEN_CODEC,SEN_TX_DB,SEN_RX_DB}), .mosi(mosi), .miso(miso), - .cgen_st_status(cgen_st_status), .cgen_st_ld(cgen_st_ld),.cgen_st_refmon(cgen_st_refmon), - .cgen_sync_b(cgen_sync_b), .cgen_ref_sel(cgen_ref_sel), - .io_tx(io_tx), .io_rx(io_rx), - .tx_i(tx_i), .tx_q(tx_q), - .rx_i(rx_i), .rx_q(rx_q), - .pps_in(PPS_IN) ); - -endmodule // u1plus |