diff options
Diffstat (limited to 'usrp2')
| -rw-r--r-- | usrp2/fifo/Makefile.srcs | 1 | ||||
| -rw-r--r-- | usrp2/fifo/packet_router.v | 120 | ||||
| -rw-r--r-- | usrp2/top/u2_rev3/u2_core_udp.v | 33 |
3 files changed, 135 insertions, 19 deletions
diff --git a/usrp2/fifo/Makefile.srcs b/usrp2/fifo/Makefile.srcs index c66979132..acd25d807 100644 --- a/usrp2/fifo/Makefile.srcs +++ b/usrp2/fifo/Makefile.srcs @@ -22,4 +22,5 @@ fifo36_to_fifo19.v \ fifo19_to_fifo36.v \ fifo36_mux.v \ fifo36_demux.v \ +packet_router.v \ )) diff --git a/usrp2/fifo/packet_router.v b/usrp2/fifo/packet_router.v new file mode 100644 index 000000000..53cf1bcce --- /dev/null +++ b/usrp2/fifo/packet_router.v @@ -0,0 +1,120 @@ +module packet_router + #(parameter BUF_SIZE = 9) + ( + //wishbone interface for memory mapped CPU frames + input wb_clk_i, + input wb_rst_i, + input wb_we_i, + input wb_stb_i, + input [15:0] wb_adr_i, + input [31:0] wb_dat_i, + output [31:0] wb_dat_o, + output reg wb_ack_o, + output wb_err_o, + output wb_rty_o, + + input stream_clk, + input stream_rst, + + //input control register + input [31:0] control, + + //output status register + output [31:0] status, + + output sys_int_o, //want an interrupt? + + // Input Interfaces (in to router) + input [35:0] eth_inp_data, input eth_inp_valid, output eth_inp_ready, + + // Output Interfaces (out of router) + output [35:0] eth_out_data, output eth_out_valid, input eth_out_ready + ); + + //which buffer: 0 = CPU read buffer, 1 = CPU write buffer + wire which_buf = wb_adr_i[BUF_SIZE+2]; + + //////////////////////////////////////////////////////////////////// + // status and controls + //////////////////////////////////////////////////////////////////// + wire eth_to_cpu_flag_ack = control[0]; + + wire eth_to_cpu_flag_rdy; + assign status[0] = eth_to_cpu_flag_rdy; + + //////////////////////////////////////////////////////////////////// + // Ethernet input control + //////////////////////////////////////////////////////////////////// + + localparam ETH_TO_CPU_STATE_WAIT_SOF = 0; + localparam ETH_TO_CPU_STATE_WAIT_EOF = 1; + localparam ETH_TO_CPU_STATE_WAIT_ACK_HI = 2; + localparam ETH_TO_CPU_STATE_WAIT_ACK_LO = 3; + + reg [1:0] eth_to_cpu_state; + reg [BUF_SIZE-1:0] eth_to_cpu_addr; + wire [BUF_SIZE-1:0] eth_to_cpu_addr_next = eth_to_cpu_addr + 1'b1; + + wire eth_to_cpu_reading_input = ( + eth_to_cpu_state == ETH_TO_CPU_STATE_WAIT_SOF || + eth_to_cpu_state == ETH_TO_CPU_STATE_WAIT_EOF + )? 1'b1 : 1'b0; + + wire eth_to_cpu_we = eth_to_cpu_reading_input; + assign eth_inp_ready = eth_to_cpu_reading_input; + assign eth_to_cpu_flag_rdy = (eth_to_cpu_state == ETH_TO_CPU_STATE_WAIT_ACK_HI)? 1'b1 : 1'b0; + + assign wb_err_o = 1'b0; // Unused for now + assign wb_rty_o = 1'b0; // Unused for now + always @(posedge wb_clk_i) + wb_ack_o <= wb_stb_i & ~wb_ack_o; + + RAMB16_S36_S36 eth_to_cpu_buff( + //port A = wishbone memory mapped address space + .DOA(wb_dat_o),.ADDRA(wb_adr_i[BUF_SIZE+1:2]),.CLKA(wb_clk_i),.DIA(wb_dat_i),.DIPA(4'h0), + .ENA(wb_stb_i & (which_buf == 1'b0)),.SSRA(0),.WEA(wb_we_i), + //port B = input from ethernet packets + .DOB(),.ADDRB(eth_to_cpu_addr),.CLKB(stream_clk),.DIB(eth_inp_data),.DIPB(4'h0), + .ENB(eth_to_cpu_we),.SSRB(0),.WEB(eth_to_cpu_we) + ); + + always @(posedge stream_clk) + if(stream_rst) begin + eth_to_cpu_state <= ETH_TO_CPU_STATE_WAIT_SOF; + eth_to_cpu_addr <= 0; + end + else begin + case(eth_to_cpu_state) + ETH_TO_CPU_STATE_WAIT_SOF: begin + if (eth_inp_ready & eth_inp_valid & (eth_inp_data[32] == 1'b1)) begin + eth_to_cpu_state <= ETH_TO_CPU_STATE_WAIT_EOF; + eth_to_cpu_addr <= eth_to_cpu_addr_next; + end + end + + ETH_TO_CPU_STATE_WAIT_EOF: begin + if (eth_inp_ready & eth_inp_valid & (eth_inp_data[33] == 1'b1)) begin + eth_to_cpu_state <= ETH_TO_CPU_STATE_WAIT_ACK_HI; + end + if (eth_inp_ready & eth_inp_valid) begin + eth_to_cpu_addr <= eth_to_cpu_addr_next; + end + end + + ETH_TO_CPU_STATE_WAIT_ACK_HI: begin + if (eth_to_cpu_flag_ack == 1'b1) begin + eth_to_cpu_state <= ETH_TO_CPU_STATE_WAIT_ACK_LO; + end + end + + ETH_TO_CPU_STATE_WAIT_ACK_LO: begin + if (eth_to_cpu_flag_ack == 0'b1) begin + eth_to_cpu_state <= ETH_TO_CPU_STATE_WAIT_SOF; + end + end + + endcase //eth_to_cpu_state + end + + +endmodule // packet_router diff --git a/usrp2/top/u2_rev3/u2_core_udp.v b/usrp2/top/u2_rev3/u2_core_udp.v index 9e62ee1cc..19b152b70 100644 --- a/usrp2/top/u2_rev3/u2_core_udp.v +++ b/usrp2/top/u2_rev3/u2_core_udp.v @@ -359,29 +359,24 @@ module u2_core wire wr3_ready_i, wr3_ready_o; wire [3:0] wr0_flags, wr1_flags, wr2_flags, wr3_flags; wire [31:0] wr0_dat, wr1_dat, wr2_dat, wr3_dat; - - buffer_pool #(.BUF_SIZE(9), .SET_ADDR(SR_BUF_POOL)) buffer_pool + + wire [31:0] router_control; + + setting_reg #(.my_addr(SR_BUF_POOL)) + sreg(.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp), + .out(router_control),.changed()); + + packet_router #(.BUF_SIZE(9)) packet_router (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst), .wb_we_i(s1_we),.wb_stb_i(s1_stb),.wb_adr_i(s1_adr),.wb_dat_i(s1_dat_o), .wb_dat_o(s1_dat_i),.wb_ack_o(s1_ack),.wb_err_o(),.wb_rty_o(), - + .stream_clk(dsp_clk), .stream_rst(dsp_rst), - .set_stb(set_stb_dsp), .set_addr(set_addr_dsp), .set_data(set_data_dsp), - .status(status),.sys_int_o(buffer_int), - - .s0(status_b0),.s1(status_b1),.s2(status_b2),.s3(status_b3), - .s4(status_b4),.s5(status_b5),.s6(status_b6),.s7(status_b7), - - // Write Interfaces - .wr0_data_i(wr0_dat), .wr0_flags_i(wr0_flags), .wr0_ready_i(wr0_ready_i), .wr0_ready_o(wr0_ready_o), - .wr1_data_i(wr1_dat), .wr1_flags_i(wr1_flags), .wr1_ready_i(wr1_ready_i), .wr1_ready_o(wr1_ready_o), - .wr2_data_i(wr2_dat), .wr2_flags_i(wr2_flags), .wr2_ready_i(wr2_ready_i), .wr2_ready_o(wr2_ready_o), - .wr3_data_i(wr3_dat), .wr3_flags_i(wr3_flags), .wr3_ready_i(wr3_ready_i), .wr3_ready_o(wr3_ready_o), - // Read Interfaces - .rd0_data_o(rd0_dat), .rd0_flags_o(rd0_flags), .rd0_ready_i(rd0_ready_i), .rd0_ready_o(rd0_ready_o), - .rd1_data_o(rd1_dat), .rd1_flags_o(rd1_flags), .rd1_ready_i(rd1_ready_i), .rd1_ready_o(rd1_ready_o), - .rd2_data_o(rd2_dat), .rd2_flags_o(rd2_flags), .rd2_ready_i(rd2_ready_i), .rd2_ready_o(rd2_ready_o), - .rd3_data_o(rd3_dat), .rd3_flags_o(rd3_flags), .rd3_ready_i(rd3_ready_i), .rd3_ready_o(rd3_ready_o) + + .control(router_control), .status(status), .sys_int_o(buffer_int), + + .eth_inp_data({wr2_flags, wr2_dat}), .eth_inp_valid(wr2_ready_i), .eth_inp_ready(wr2_ready_o), + .eth_out_data({rd2_flags, rd2_dat}), .eth_out_valid(rd2_ready_o), .eth_out_ready(rd2_ready_i) ); wire [31:0] status_enc; |