diff options
Diffstat (limited to 'usrp2')
| -rw-r--r-- | usrp2/gpmc/gpmc_to_fifo.v | 14 | ||||
| -rw-r--r-- | usrp2/top/E1x0/E1x0.ucf (renamed from usrp2/top/E1x0/E100.ucf) | 0 | ||||
| -rw-r--r-- | usrp2/top/E1x0/E1x0.v (renamed from usrp2/top/E1x0/E100.v) | 4 | ||||
| -rw-r--r-- | usrp2/top/E1x0/Makefile.E100 | 6 | ||||
| -rw-r--r-- | usrp2/top/E1x0/Makefile.E110 | 6 | ||||
| -rw-r--r-- | usrp2/top/E1x0/timing.ucf | 2 |
6 files changed, 16 insertions, 16 deletions
diff --git a/usrp2/gpmc/gpmc_to_fifo.v b/usrp2/gpmc/gpmc_to_fifo.v index 043ec9b6b..680095620 100644 --- a/usrp2/gpmc/gpmc_to_fifo.v +++ b/usrp2/gpmc/gpmc_to_fifo.v @@ -36,7 +36,7 @@ //////////////////////////////////////////////////////////////////////// module gpmc_to_fifo - #(parameter PTR_WIDTH = 2, parameter ADDR_WIDTH = 10) + #(parameter PTR_WIDTH = 2, parameter ADDR_WIDTH = 10, parameter XFER_OFFSET = 2) (input [15:0] EM_D, input [ADDR_WIDTH:1] EM_A, input EM_CLK, input EM_WE, input clk, input reset, input clear, input arst, output [17:0] data_o, output src_rdy_o, input dst_rdy_i, @@ -47,7 +47,7 @@ module gpmc_to_fifo reg gpmc_state; reg [15:0] vita_len; reg [ADDR_WIDTH:1] addr; - wire [ADDR_WIDTH:1] last_addr = {vita_len[ADDR_WIDTH-2:0], 1'b0} - 1'b1 + 2; + wire [ADDR_WIDTH:1] last_addr = {vita_len[ADDR_WIDTH-2:0], 1'b0} - 1'b1 + XFER_OFFSET; reg [PTR_WIDTH:0] gpmc_ptr, next_gpmc_ptr; localparam GPMC_STATE_START = 0; localparam GPMC_STATE_FILL = 1; @@ -75,7 +75,7 @@ module gpmc_to_fifo case(gpmc_state) GPMC_STATE_START: begin - if (EM_A == 2) begin + if (EM_A == XFER_OFFSET) begin gpmc_state <= GPMC_STATE_FILL; vita_len <= EM_D; next_gpmc_ptr <= gpmc_ptr + 1; @@ -123,14 +123,14 @@ module gpmc_to_fifo if (reset | clear) begin fifo_state <= FIFO_STATE_CLAIM; fifo_ptr <= 0; - counter <= 2; + counter <= XFER_OFFSET; end else begin case(fifo_state) FIFO_STATE_CLAIM: begin if (bram_available_to_empty && data_o[16]) fifo_state <= FIFO_STATE_PRE; - counter <= 2; + counter <= XFER_OFFSET; end FIFO_STATE_PRE: begin @@ -142,7 +142,7 @@ module gpmc_to_fifo if (src_rdy_o && dst_rdy_i && data_o[17]) begin fifo_state <= FIFO_STATE_CLAIM; fifo_ptr <= fifo_ptr + 1; - counter <= 2; + counter <= XFER_OFFSET; end else if (src_rdy_o && dst_rdy_i) begin counter <= counter + 1; @@ -159,7 +159,7 @@ module gpmc_to_fifo //assign data and frame bits to bram input assign data_i[15:0] = EM_D; - assign data_i[16] = (addr == 2); + assign data_i[16] = (addr == XFER_OFFSET); assign data_i[17] = (addr == last_addr); //instantiate dual ported bram for async read + write diff --git a/usrp2/top/E1x0/E100.ucf b/usrp2/top/E1x0/E1x0.ucf index 278fc289a..278fc289a 100644 --- a/usrp2/top/E1x0/E100.ucf +++ b/usrp2/top/E1x0/E1x0.ucf diff --git a/usrp2/top/E1x0/E100.v b/usrp2/top/E1x0/E1x0.v index 080ae24c7..e7b0a4e00 100644 --- a/usrp2/top/E1x0/E100.v +++ b/usrp2/top/E1x0/E1x0.v @@ -18,7 +18,7 @@ `timescale 1ns / 1ps ////////////////////////////////////////////////////////////////////////////////// -module E100 +module E1x0 (input CLK_FPGA_P, input CLK_FPGA_N, // Diff output [3:0] debug_led, output [31:0] debug, output [1:0] debug_clk, input debug_pb, output FPGA_TXD, input FPGA_RXD, @@ -193,4 +193,4 @@ module E100 //assign debug = gpmc_debug; assign debug = core_debug; -endmodule // E100 +endmodule // E1x0 diff --git a/usrp2/top/E1x0/Makefile.E100 b/usrp2/top/E1x0/Makefile.E100 index 2b0ae8367..92334d987 100644 --- a/usrp2/top/E1x0/Makefile.E100 +++ b/usrp2/top/E1x0/Makefile.E100 @@ -5,7 +5,7 @@ ################################################## # Project Setup ################################################## -TOP_MODULE = E100 +TOP_MODULE = E1x0 BUILD_DIR = $(abspath build$(ISE)-E100) # set me in a custom makefile @@ -49,8 +49,8 @@ simulator "ISE Simulator (VHDL/Verilog)" \ ################################################## TOP_SRCS = \ ../B100/u1plus_core.v \ -E100.v \ -E100.ucf \ +E1x0.v \ +E1x0.ucf \ timing.ucf SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ diff --git a/usrp2/top/E1x0/Makefile.E110 b/usrp2/top/E1x0/Makefile.E110 index 8de0714c3..e5be8d2fa 100644 --- a/usrp2/top/E1x0/Makefile.E110 +++ b/usrp2/top/E1x0/Makefile.E110 @@ -5,7 +5,7 @@ ################################################## # Project Setup ################################################## -TOP_MODULE = u1e +TOP_MODULE = E1x0 BUILD_DIR = $(abspath build$(ISE)-E110) # set me in a custom makefile @@ -49,8 +49,8 @@ simulator "ISE Simulator (VHDL/Verilog)" \ ################################################## TOP_SRCS = \ ../B100/u1plus_core.v \ -E100.v \ -E100.ucf \ +E1x0.v \ +E1x0.ucf \ timing.ucf SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ diff --git a/usrp2/top/E1x0/timing.ucf b/usrp2/top/E1x0/timing.ucf index 16f06dab7..6bd559426 100644 --- a/usrp2/top/E1x0/timing.ucf +++ b/usrp2/top/E1x0/timing.ucf @@ -14,7 +14,7 @@ INST "EM_NCS6" TNM = gpmc_net; INST "EM_NWE" TNM = gpmc_net; INST "EM_NOE" TNM = gpmc_net; -TIMEGRP "gpmc_net" OFFSET = IN 5 ns VALID 10 ns BEFORE "EM_CLK" FALLING; +TIMEGRP "gpmc_net" OFFSET = IN 7 ns VALID 14 ns BEFORE "EM_CLK" FALLING; TIMEGRP "gpmc_net_out" OFFSET = OUT 14 ns AFTER "EM_CLK" RISING; //2 clock cyc per read #constrain interrupt lines |