diff options
Diffstat (limited to 'usrp2/vrt')
| -rw-r--r-- | usrp2/vrt/vita_rx_framer.v | 8 | ||||
| -rw-r--r-- | usrp2/vrt/vita_tx_deframer.v | 3 |
2 files changed, 7 insertions, 4 deletions
diff --git a/usrp2/vrt/vita_rx_framer.v b/usrp2/vrt/vita_rx_framer.v index 514df1151..6e4b8025d 100644 --- a/usrp2/vrt/vita_rx_framer.v +++ b/usrp2/vrt/vita_rx_framer.v @@ -85,9 +85,11 @@ module vita_rx_framer (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(samples_per_packet),.changed()); - setting_reg #(.my_addr(BASE+8),.width(4), .at_reset(1)) sr_numchan + assign numchan = 0;/* + setting_reg #(.my_addr(BASE+8),.width(4), .at_reset(0)) sr_numchan (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(numchan),.changed()); + */ // Output FIFO for packetized data localparam VITA_IDLE = 0; @@ -164,7 +166,7 @@ module vita_rx_framer VITA_PAYLOAD : if(sample_fifo_src_rdy_i) begin - if(sample_phase == (numchan-4'd1)) + if(sample_phase == numchan) begin sample_phase <= 0; sample_ctr <= sample_ctr + 1; @@ -213,7 +215,7 @@ module vita_rx_framer assign data_o[35:34] = 2'b00; // Always write full lines assign sample_fifo_dst_rdy_o = pkt_fifo_rdy & ( ((vita_state==VITA_PAYLOAD) & - (sample_phase == (numchan-4'd1)) & + (sample_phase == numchan) & ~|flags_fifo_o[4:1]) | (vita_state==VITA_ERR_PAYLOAD)); diff --git a/usrp2/vrt/vita_tx_deframer.v b/usrp2/vrt/vita_tx_deframer.v index 6919da11a..ed3916311 100644 --- a/usrp2/vrt/vita_tx_deframer.v +++ b/usrp2/vrt/vita_tx_deframer.v @@ -43,10 +43,11 @@ module vita_tx_deframer localparam FIFOWIDTH = 5+64+16+(32*MAXCHAN); - wire [1:0] numchan; + wire [1:0] numchan = 0;/* setting_reg #(.my_addr(BASE), .at_reset(0), .width(2)) sr_numchan (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(numchan),.changed()); + */ reg [3:0] vita_state; wire has_streamid, has_classid, has_secs, has_tics, has_trailer; |