diff options
Diffstat (limited to 'usrp2/top')
| -rwxr-xr-x | usrp2/top/u1e/core_compile | 2 | ||||
| -rw-r--r-- | usrp2/top/u1e/u1e_core.v | 11 | ||||
| -rw-r--r-- | usrp2/top/u2plus/Makefile.N200 | 98 |
3 files changed, 106 insertions, 5 deletions
diff --git a/usrp2/top/u1e/core_compile b/usrp2/top/u1e/core_compile new file mode 100755 index 000000000..fb1b2a854 --- /dev/null +++ b/usrp2/top/u1e/core_compile @@ -0,0 +1,2 @@ +iverilog -Wall -y. -y ../../control_lib/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac u1e_core.v 2>&1 + diff --git a/usrp2/top/u1e/u1e_core.v b/usrp2/top/u1e/u1e_core.v index b3d71b4ab..1e3b08465 100644 --- a/usrp2/top/u1e/u1e_core.v +++ b/usrp2/top/u1e/u1e_core.v @@ -11,7 +11,7 @@ module u1e_core input EM_NWE, input EM_NOE, inout db_sda, inout db_scl, - output sclk, output [7:0] sen, output mosi, input miso, + output sclk, output [15:0] sen, output mosi, input miso, input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel, output tx_have_space, output tx_underrun, output rx_have_data, output rx_overrun, @@ -127,7 +127,7 @@ module u1e_core wire [31:0] sample_rx, sample_tx; wire strobe_rx, strobe_tx; wire rx1_dst_rdy, rx1_src_rdy; - wire [99:0] rx1_data; + wire [100:0] rx1_data; wire run_rx; wire [35:0] vita_rx_data; wire vita_rx_src_rdy, vita_rx_dst_rdy; @@ -368,7 +368,7 @@ module u1e_core atr_controller16 atr_controller16 (.clk_i(wb_clk), .rst_i(wb_rst), - .adr_i(s6_adr), .sel_i(s6_sel), .dat_i(s6_dat_mosi), .dat_o(s6_dat_miso), + .adr_i(s6_adr[5:0]), .sel_i(s6_sel), .dat_i(s6_dat_mosi), .dat_o(s6_dat_miso), .we_i(s6_we), .stb_i(s6_stb), .cyc_i(s6_cyc), .ack_o(s6_ack), .run_rx(run_rx), .run_tx(run_tx), .ctrl_lines(atr_lines)); @@ -383,7 +383,7 @@ module u1e_core wb_readback_mux_16LE readback_mux_32 (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s7_stb), - .wb_adr_i(s7_adr), .wb_dat_o(s7_dat_miso), .wb_ack_o(s7_ack), + .wb_adr_i({5'b0,s7_adr}), .wb_dat_o(s7_dat_miso), .wb_ack_o(s7_ack), .word00(vita_time[63:32]), .word01(vita_time[31:0]), .word02(vita_time_pps[63:32]), .word03(vita_time_pps[31:0]), @@ -400,7 +400,8 @@ module u1e_core time_64bit #(.TICKS_PER_SEC(32'd64000000),.BASE(SR_TIME64)) time_64bit (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), - .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int)); + .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int), + .exp_time_in(0)); // ///////////////////////////////////////////////////////////////////////////////////// // Debug circuitry diff --git a/usrp2/top/u2plus/Makefile.N200 b/usrp2/top/u2plus/Makefile.N200 new file mode 100644 index 000000000..9175f9304 --- /dev/null +++ b/usrp2/top/u2plus/Makefile.N200 @@ -0,0 +1,98 @@ +# +# Copyright 2008 Ettus Research LLC +# + +################################################## +# Project Setup +################################################## +TOP_MODULE = u2plus +BUILD_DIR = $(abspath build$(ISE)-N200) + +################################################## +# Include other makefiles +################################################## + +include ../Makefile.common +include ../../fifo/Makefile.srcs +include ../../control_lib/Makefile.srcs +include ../../sdr_lib/Makefile.srcs +include ../../serdes/Makefile.srcs +include ../../simple_gemac/Makefile.srcs +include ../../timing/Makefile.srcs +include ../../opencores/Makefile.srcs +include ../../vrt/Makefile.srcs +include ../../udp/Makefile.srcs +include ../../coregen/Makefile.srcs +include ../../extramfifo/Makefile.srcs + + +################################################## +# Project Properties +################################################## +export PROJECT_PROPERTIES := \ +family "Spartan-3A DSP" \ +device xc3sd1800a \ +package fg676 \ +speed -5 \ +top_level_module_type "HDL" \ +synthesis_tool "XST (VHDL/Verilog)" \ +simulator "ISE Simulator (VHDL/Verilog)" \ +"Preferred Language" "Verilog" \ +"Enable Message Filtering" FALSE \ +"Display Incremental Messages" FALSE + +################################################## +# Sources +################################################## +TOP_SRCS = \ +u2plus_core.v \ +u2plus.v \ +u2plus.ucf + +SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ +$(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ +$(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ +$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) + +################################################## +# Process Properties +################################################## +SYNTHESIZE_PROPERTIES = \ +"Number of Clock Buffers" 8 \ +"Pack I/O Registers into IOBs" Yes \ +"Optimization Effort" High \ +"Optimize Instantiated Primitives" TRUE \ +"Register Balancing" Yes \ +"Use Clock Enable" Auto \ +"Use Synchronous Reset" Auto \ +"Use Synchronous Set" Auto + +TRANSLATE_PROPERTIES = \ +"Macro Search Path" "$(shell pwd)/../../coregen/" + +MAP_PROPERTIES = \ +"Allow Logic Optimization Across Hierarchy" TRUE \ +"Map to Input Functions" 4 \ +"Optimization Strategy (Cover Mode)" Speed \ +"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \ +"Perform Timing-Driven Packing and Placement" TRUE \ +"Map Effort Level" High \ +"Extra Effort" Normal \ +"Combinatorial Logic Optimization" TRUE \ +"Register Duplication" TRUE + +PLACE_ROUTE_PROPERTIES = \ +"Place & Route Effort Level (Overall)" High + +STATIC_TIMING_PROPERTIES = \ +"Number of Paths in Error/Verbose Report" 10 \ +"Report Type" "Error Report" + +GEN_PROG_FILE_PROPERTIES = \ +"Configuration Rate" 6 \ +"Create Binary Configuration File" TRUE \ +"Done (Output Events)" 5 \ +"Enable Bitstream Compression" TRUE \ +"Enable Outputs (Output Events)" 6 + +SIM_MODEL_PROPERTIES = "" |