summaryrefslogtreecommitdiffstats
path: root/usrp2/top
diff options
context:
space:
mode:
Diffstat (limited to 'usrp2/top')
-rw-r--r--usrp2/top/N2x0/u2plus_core.v43
-rw-r--r--usrp2/top/USRP2/u2_core.v57
2 files changed, 16 insertions, 84 deletions
diff --git a/usrp2/top/N2x0/u2plus_core.v b/usrp2/top/N2x0/u2plus_core.v
index a685c4319..fc54bbbe9 100644
--- a/usrp2/top/N2x0/u2plus_core.v
+++ b/usrp2/top/N2x0/u2plus_core.v
@@ -129,7 +129,7 @@ module u2plus_core
// External RAM
input [35:0] RAM_D_pi,
output [35:0] RAM_D_po,
- output RAM_D_poe,
+ output RAM_D_poe,
output [20:0] RAM_A,
output RAM_CE1n,
output RAM_CENn,
@@ -230,11 +230,11 @@ module u2plus_core
.s4_addr(8'b0101_1000),.s4_mask(8'b1111_1100), // GPIO
.s5_addr(8'b0101_1100),.s5_mask(8'b1111_1100), // Readback
.s6_addr(8'b0110_0000),.s6_mask(8'b1111_0000), // Ethernet MAC
- .s7_addr(8'b0111_0000),.s7_mask(8'b1111_0000), // 20K-24K, Settings Bus (only uses 1K)
+ .s7_addr(8'b0111_0000),.s7_mask(8'b1111_0000), // Settings Bus (only uses 1K)
.s8_addr(8'b1000_0000),.s8_mask(8'b1111_1100), // PIC
.s9_addr(8'b1000_0100),.s9_mask(8'b1111_1100), // Unused
.sa_addr(8'b1000_1000),.sa_mask(8'b1111_1100), // UART
- .sb_addr(8'b1000_1100),.sb_mask(8'b1111_1100), // ATR
+ .sb_addr(8'b1000_1100),.sb_mask(8'b1111_1100), // Unused
.sc_addr(8'b1001_0000),.sc_mask(8'b1111_0000), // Unused
.sd_addr(8'b1010_0000),.sd_mask(8'b1111_0000), // ICAP
.se_addr(8'b1011_0000),.se_mask(8'b1111_0000), // SPI Flash
@@ -275,7 +275,10 @@ module u2plus_core
.se_dat_i(se_dat_i),.se_ack_i(se_ack),.se_err_i(0),.se_rty_i(0),
.sf_dat_o(sf_dat_o),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb),
.sf_dat_i(sf_dat_i),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0));
-
+
+ // Unused Slaves 9, b, c
+ assign s9_ack = 0; assign sb_ack = 0; assign sc_ack = 0;
+
// ////////////////////////////////////////////////////////////////////////////////////////
// Reset Controller
@@ -528,20 +531,6 @@ module u2plus_core
.irq(irq) );
// /////////////////////////////////////////////////////////////////////////
- // Master Timer, Slave #9
-
- // No longer used, replaced with simple_timer below
- assign s9_ack = 0;
-
- // /////////////////////////////////////////////////////////////////////////
- // Simple Timer interrupts
- /*
- simple_timer #(.BASE(SR_SIMTIMER)) simple_timer
- (.clk(wb_clk), .reset(wb_rst),
- .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
- .onetime_int(onetime_int), .periodic_int(periodic_int));
- */
- // /////////////////////////////////////////////////////////////////////////
// UART, Slave #10
quad_uart #(.TXDEPTH(3),.RXDEPTH(3)) uart // depth of 3 is 128 entries
@@ -550,24 +539,6 @@ module u2plus_core
.adr_i(sa_adr[6:2]),.dat_i(sa_dat_o),.dat_o(sa_dat_i),
.rx_int_o(uart_rx_int),.tx_int_o(uart_tx_int),
.tx_o(uart_tx_o),.rx_i(uart_rx_i),.baud_o(uart_baud_o));
-
- // /////////////////////////////////////////////////////////////////////////
- // ATR Controller, Slave #11
-
- /*
- atr_controller atr_controller
- (.clk_i(wb_clk),.rst_i(wb_rst),
- .adr_i(sb_adr[5:0]),.sel_i(sb_sel),.dat_i(sb_dat_o),.dat_o(sb_dat_i),
- .we_i(sb_we),.stb_i(sb_stb),.cyc_i(sb_cyc),.ack_o(sb_ack),
- .run_rx(run_rx0_d1 | run_rx1_d1),.run_tx(run_tx),.ctrl_lines(atr_lines) );
- */
-
- // //////////////////////////////////////////////////////////////////////////
- // Time Sync, Slave #12
-
- // No longer used, see time_64bit. Still need to handle mimo time, though
- assign sc_ack = 0;
-
// /////////////////////////////////////////////////////////////////////////
// ICAP for reprogramming the FPGA, Slave #13 (D)
diff --git a/usrp2/top/USRP2/u2_core.v b/usrp2/top/USRP2/u2_core.v
index eae16bfeb..28df79244 100644
--- a/usrp2/top/USRP2/u2_core.v
+++ b/usrp2/top/USRP2/u2_core.v
@@ -136,7 +136,7 @@ module u2_core
// External RAM
input [17:0] RAM_D_pi,
- output [17:0] RAM_D_po,
+ output [17:0] RAM_D_po,
output RAM_D_poe,
output [18:0] RAM_A,
output RAM_CE1n,
@@ -236,13 +236,13 @@ module u2_core
.s4_addr(8'b0101_1000),.s4_mask(8'b1111_1100), // GPIO
.s5_addr(8'b0101_1100),.s5_mask(8'b1111_1100), // Readback
.s6_addr(8'b0110_0000),.s6_mask(8'b1111_0000), // Ethernet MAC
- .s7_addr(8'b0111_0000),.s7_mask(8'b1111_0000), // 20K-24K, Settings Bus (only uses 1K)
+ .s7_addr(8'b0111_0000),.s7_mask(8'b1111_0000), // Settings Bus (only uses 1K)
.s8_addr(8'b1000_0000),.s8_mask(8'b1111_1100), // PIC
.s9_addr(8'b1000_0100),.s9_mask(8'b1111_1100), // Unused
.sa_addr(8'b1000_1000),.sa_mask(8'b1111_1100), // UART
- .sb_addr(8'b1000_1100),.sb_mask(8'b1111_1100), // ATR
+ .sb_addr(8'b1000_1100),.sb_mask(8'b1111_1100), // Unused
.sc_addr(8'b1001_0000),.sc_mask(8'b1111_0000), // Unused
- .sd_addr(8'b1010_0000),.sd_mask(8'b1111_0000), // SD Card access
+ .sd_addr(8'b1010_0000),.sd_mask(8'b1111_0000), // Unused
.se_addr(8'b1011_0000),.se_mask(8'b1111_0000), // Unused
.sf_addr(8'b1100_0000),.sf_mask(8'b1100_0000), // Unused
.dw(dw),.aw(aw),.sw(sw)) wb_1master
@@ -281,7 +281,11 @@ module u2_core
.se_dat_i(se_dat_i),.se_ack_i(se_ack),.se_err_i(0),.se_rty_i(0),
.sf_dat_o(sf_dat_o),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb),
.sf_dat_i(sf_dat_i),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0));
-
+
+ // Unused Slaves 9 and b-f
+ assign s9_ack = 0; assign sb_ack = 0; assign sc_ack = 0;
+ assign sd_ack = 0; assign se_ack = 0; assign fc_ack = 0;
+
// ////////////////////////////////////////////////////////////////////////////////////////
// Reset Controller
system_control sysctrl (.wb_clk_i(wb_clk), // .por_i(por),
@@ -531,20 +535,6 @@ module u2_core
.irq(irq) );
// /////////////////////////////////////////////////////////////////////////
- // Master Timer, Slave #9
-
- // No longer used, replaced with simple_timer below
- assign s9_ack = 0;
-
- // /////////////////////////////////////////////////////////////////////////
- // Simple Timer interrupts
- /*
- simple_timer #(.BASE(SR_SIMTIMER)) simple_timer
- (.clk(wb_clk), .reset(wb_rst),
- .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
- .onetime_int(onetime_int), .periodic_int(periodic_int));
- */
- // /////////////////////////////////////////////////////////////////////////
// UART, Slave #10
simple_uart #(.TXDEPTH(3),.RXDEPTH(3)) uart // depth of 3 is 128 entries
@@ -553,36 +543,7 @@ module u2_core
.adr_i(sa_adr[4:2]),.dat_i(sa_dat_o),.dat_o(sa_dat_i),
.rx_int_o(uart_rx_int),.tx_int_o(uart_tx_int),
.tx_o(uart_tx_o),.rx_i(uart_rx_i),.baud_o(uart_baud_o));
-
- // /////////////////////////////////////////////////////////////////////////
- // ATR Controller, Slave #11
-
- /*
- atr_controller atr_controller
- (.clk_i(wb_clk),.rst_i(wb_rst),
- .adr_i(sb_adr[5:0]),.sel_i(sb_sel),.dat_i(sb_dat_o),.dat_o(sb_dat_i),
- .we_i(sb_we),.stb_i(sb_stb),.cyc_i(sb_cyc),.ack_o(sb_ack),
- .run_rx(run_rx0_d1 | run_rx1_d1),.run_tx(run_tx),.ctrl_lines(atr_lines) );
- */
-
- // //////////////////////////////////////////////////////////////////////////
- // Time Sync, Slave #12
- // No longer used, see time_64bit. Still need to handle mimo time, though
- assign sc_ack = 0;
-
- // /////////////////////////////////////////////////////////////////////////
- // SD Card Reader / Writer, Slave #13
- /*
- sd_spi_wb sd_spi_wb
- (.clk(wb_clk),.rst(wb_rst),
- .sd_clk(sd_clk),.sd_csn(sd_csn),.sd_mosi(sd_mosi),.sd_miso(sd_miso),
- .wb_cyc_i(sd_cyc),.wb_stb_i(sd_stb),.wb_we_i(sd_we),
- .wb_adr_i(sd_adr[3:2]),.wb_dat_i(sd_dat_o[7:0]),.wb_dat_o(sd_dat_i[7:0]),
- .wb_ack_o(sd_ack) );
-
- assign sd_dat_i[31:8] = 0;
- */
// /////////////////////////////////////////////////////////////////////////
// ADC Frontend
wire [23:0] adc_i, adc_q;
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 07:38:13 +0000