diff options
Diffstat (limited to 'usrp2/top/u2_rev3')
| -rw-r--r-- | usrp2/top/u2_rev3/u2_core_udp.v | 56 | ||||
| -rw-r--r-- | usrp2/top/u2_rev3/u2_rev3.v | 15 |
2 files changed, 36 insertions, 35 deletions
diff --git a/usrp2/top/u2_rev3/u2_core_udp.v b/usrp2/top/u2_rev3/u2_core_udp.v index b034791a7..c9502898b 100644 --- a/usrp2/top/u2_rev3/u2_core_udp.v +++ b/usrp2/top/u2_rev3/u2_core_udp.v @@ -423,7 +423,10 @@ module u2_core cycle_count <= 0; else cycle_count <= cycle_count + 1; - + + //compatibility number -> increment when the fpga has been sufficiently altered + localparam compat_num = 32'd2; + wb_readback_mux buff_pool_status (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb), .wb_adr_i(s5_adr), .wb_dat_o(s5_dat_i), .wb_ack_o(s5_ack), @@ -431,7 +434,7 @@ module u2_core .word00(status_b0),.word01(status_b1),.word02(status_b2),.word03(status_b3), .word04(status_b4),.word05(status_b5),.word06(status_b6),.word07(status_b7), .word08(status),.word09({sim_mode,27'b0,clock_divider[3:0]}),.word10(vita_time[63:32]), - .word11(vita_time[31:0]),.word12(32'b0),.word13(irq),.word14(status_enc),.word15(cycle_count) + .word11(vita_time[31:0]),.word12(compat_num),.word13(irq),.word14(status_enc),.word15(cycle_count) ); // ///////////////////////////////////////////////////////////////////////// @@ -466,11 +469,20 @@ module u2_core .tx_f36_data(udp_tx_data), .tx_f36_src_rdy_i(udp_tx_src_rdy), .tx_f36_dst_rdy_o(udp_tx_dst_rdy), .debug(debug_udp) ); + wire [35:0] tx_err_data, udp1_tx_data; + wire tx_err_src_rdy, tx_err_dst_rdy, udp1_tx_src_rdy, udp1_tx_dst_rdy; + fifo_cascade #(.WIDTH(36), .SIZE(ETH_TX_FIFOSIZE)) tx_eth_fifo (.clk(dsp_clk), .reset(dsp_rst), .clear(0), .datain({rd2_flags,rd2_dat}), .src_rdy_i(rd2_ready_o), .dst_rdy_o(rd2_ready_i), - .dataout(udp_tx_data), .src_rdy_o(udp_tx_src_rdy), .dst_rdy_i(udp_tx_dst_rdy)); + .dataout(udp1_tx_data), .src_rdy_o(udp1_tx_src_rdy), .dst_rdy_i(udp1_tx_dst_rdy)); + fifo36_mux #(.prio(0)) mux_err_stream + (.clk(dsp_clk), .reset(dsp_reset), .clear(0), + .data0_i(udp1_tx_data), .src0_rdy_i(udp1_tx_src_rdy), .dst0_rdy_o(udp1_tx_dst_rdy), + .data1_i(tx_err_data), .src1_rdy_i(tx_err_src_rdy), .dst1_rdy_o(tx_err_dst_rdy), + .data_o(udp_tx_data), .src_rdy_o(udp_tx_src_rdy), .dst_rdy_i(udp_tx_dst_rdy)); + fifo_cascade #(.WIDTH(36), .SIZE(ETH_RX_FIFOSIZE)) rx_eth_fifo (.clk(dsp_clk), .reset(dsp_rst), .clear(0), .datain(udp_rx_data), .src_rdy_i(udp_rx_src_rdy), .dst_rdy_o(udp_rx_dst_rdy), @@ -639,40 +651,26 @@ module u2_core // DSP TX wire [35:0] tx_data; - wire [99:0] tx1_data; - wire tx_src_rdy, tx_dst_rdy, tx1_src_rdy, tx1_dst_rdy; - - wire [31:0] debug_vtc, debug_vtd, debug_vt; + wire tx_src_rdy, tx_dst_rdy; + wire [31:0] debug_vt; fifo_cascade #(.WIDTH(36), .SIZE(DSP_TX_FIFOSIZE)) tx_fifo_cascade (.clk(dsp_clk), .reset(dsp_rst), .clear(0), .datain({rd1_flags,rd1_dat}), .src_rdy_i(rd1_ready_o), .dst_rdy_o(rd1_ready_i), .dataout(tx_data), .src_rdy_o(tx_src_rdy), .dst_rdy_i(tx_dst_rdy) ); - vita_tx_deframer #(.BASE(SR_TX_CTRL), .MAXCHAN(1)) vita_tx_deframer - (.clk(dsp_clk), .reset(dsp_rst), .clear(0), - .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .data_i(tx_data), .src_rdy_i(tx_src_rdy), .dst_rdy_o(tx_dst_rdy), - .sample_fifo_o(tx1_data), .sample_fifo_src_rdy_o(tx1_src_rdy), .sample_fifo_dst_rdy_i(tx1_dst_rdy), - .debug(debug_vtd) ); - - vita_tx_control #(.BASE(SR_TX_CTRL), .WIDTH(32)) vita_tx_control - (.clk(dsp_clk), .reset(dsp_rst), .clear(0), - .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .vita_time(vita_time),.underrun(underrun), - .sample_fifo_i(tx1_data), .sample_fifo_src_rdy_i(tx1_src_rdy), .sample_fifo_dst_rdy_o(tx1_dst_rdy), - .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), - .debug(debug_vtc) ); - - assign debug_vt = debug_vtc | debug_vtd; - - dsp_core_tx #(.BASE(SR_TX_DSP)) dsp_core_tx - (.clk(dsp_clk),.rst(dsp_rst), + vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), + .REPORT_ERROR(1), .PROT_ENG_FLAGS(1)) + vita_tx_chain + (.clk(dsp_clk), .reset(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), + .vita_time(vita_time), + .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), + .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), .dac_a(dac_a),.dac_b(dac_b), - .debug(debug_tx_dsp) ); - + .underrun(underrun), .run(run_tx), + .debug(debug_vt)); + assign dsp_rst = wb_rst; // /////////////////////////////////////////////////////////////////////////////////// diff --git a/usrp2/top/u2_rev3/u2_rev3.v b/usrp2/top/u2_rev3/u2_rev3.v index 3a43e4ffe..4daa66212 100644 --- a/usrp2/top/u2_rev3/u2_rev3.v +++ b/usrp2/top/u2_rev3/u2_rev3.v @@ -203,12 +203,13 @@ module u2_rev3 reg [13:0] adc_a_reg1, adc_b_reg1, adc_a_reg2, adc_b_reg2; reg adc_ovf_a_reg1, adc_ovf_a_reg2, adc_ovf_b_reg1, adc_ovf_b_reg2; + // ADC A and B are swapped in schematic to facilitate clean layout always @(posedge dsp_clk) begin - adc_a_reg1 <= adc_a; - adc_b_reg1 <= adc_b; - adc_ovf_a_reg1 <= adc_ovf_a; - adc_ovf_b_reg1 <= adc_ovf_b; + adc_a_reg1 <= adc_b; + adc_b_reg1 <= adc_a; + adc_ovf_a_reg1 <= adc_ovf_b; + adc_ovf_b_reg1 <= adc_ovf_a; end always @(posedge dsp_clk) @@ -327,8 +328,10 @@ module u2_rev3 end wire [15:0] dac_a_int, dac_b_int; - always @(negedge dsp_clk) dac_a <= dac_a_int; - always @(negedge dsp_clk) dac_b <= dac_b_int; + // DAC A and B are swapped in schematic to facilitate clean layout + // DAC A is also inverted in schematic to facilitate clean layout + always @(negedge dsp_clk) dac_a <= ~dac_b_int; + always @(negedge dsp_clk) dac_b <= dac_a_int; /* OFDDRRSE OFDDRRSE_serdes_inst |