diff options
Diffstat (limited to 'usrp2/top/u1plus')
| -rw-r--r-- | usrp2/top/u1plus/Makefile | 30 | ||||
| -rw-r--r-- | usrp2/top/u1plus/u1plus.ucf | 18 | ||||
| -rw-r--r-- | usrp2/top/u1plus/u1plus.v | 254 | ||||
| -rw-r--r-- | usrp2/top/u1plus/u1plus_core.v | 424 |
4 files changed, 588 insertions, 138 deletions
diff --git a/usrp2/top/u1plus/Makefile b/usrp2/top/u1plus/Makefile index 8a7c7856d..684b7bcd7 100644 --- a/usrp2/top/u1plus/Makefile +++ b/usrp2/top/u1plus/Makefile @@ -54,7 +54,7 @@ simulator "ISE Simulator (VHDL/Verilog)" \ export SOURCE_ROOT := ../../../ export SOURCES := \ control_lib/CRC16_D16.v \ -control_lib/atr_controller.v \ +control_lib/atr_controller16.v \ control_lib/bin2gray.v \ control_lib/dcache.v \ control_lib/decoder_3_8.v \ @@ -64,12 +64,13 @@ control_lib/gray_send.v \ control_lib/icache.v \ control_lib/mux4.v \ control_lib/mux8.v \ -control_lib/nsgpio.v \ +control_lib/nsgpio16LE.v \ control_lib/ram_2port.v \ +control_lib/ram_2port_mixed_width.v \ control_lib/ram_harv_cache.v \ control_lib/ram_loader.v \ control_lib/setting_reg.v \ -control_lib/settings_bus.v \ +control_lib/settings_bus_16LE.v \ control_lib/srl.v \ control_lib/system_control.v \ control_lib/wb_1master.v \ @@ -92,6 +93,13 @@ control_lib/newfifo/fifo_short.v \ control_lib/newfifo/fifo_long.v \ control_lib/newfifo/fifo_cascade.v \ control_lib/newfifo/fifo36_to_ll8.v \ +control_lib/newfifo/fifo36_to_fifo19.v \ +control_lib/newfifo/fifo19_to_fifo36.v \ +control_lib/newfifo/packet_generator.v \ +control_lib/newfifo/packet_verifier.v \ +control_lib/newfifo/packet_generator32.v \ +control_lib/newfifo/packet_verifier32.v \ +control_lib/newfifo/fifo_pacer.v \ control_lib/longfifo.v \ control_lib/shortfifo.v \ control_lib/medfifo.v \ @@ -122,8 +130,7 @@ opencores/simple_pic/rtl/simple_pic.v \ opencores/spi/rtl/verilog/spi_clgen.v \ opencores/spi/rtl/verilog/spi_defines.v \ opencores/spi/rtl/verilog/spi_shift.v \ -opencores/spi/rtl/verilog/spi_top.v \ -opencores/spi/rtl/verilog/timescale.v \ +opencores/spi/rtl/verilog/spi_top16.v \ sdr_lib/acc.v \ sdr_lib/add2.v \ sdr_lib/add2_and_round.v \ @@ -139,7 +146,7 @@ sdr_lib/clip_reg.v \ sdr_lib/cordic.v \ sdr_lib/cordic_z24.v \ sdr_lib/cordic_stage.v \ -sdr_lib/dsp_core_rx.v \ +sdr_lib/dsp_core_rx_udp.v \ sdr_lib/dsp_core_tx.v \ sdr_lib/hb_dec.v \ sdr_lib/hb_interp.v \ @@ -160,7 +167,13 @@ timing/time_receiver.v \ timing/time_sender.v \ timing/time_sync.v \ timing/timer.v \ -top/u1_core/u1_core.v \ +timing/time_64bit.v \ +vrt/vita_rx_control.v \ +vrt/vita_rx_framer.v \ +vrt/vita_tx_control.v \ +vrt/vita_tx_deframer.v \ +timing/time_compare.v \ +top/u1plus/u1plus_core.v \ top/u1plus/u1plus.ucf \ top/u1plus/timing.ucf \ top/u1plus/u1plus.v @@ -204,7 +217,8 @@ export GEN_PROG_FILE_PROPERTIES := \ "Create Binary Configuration File" TRUE \ "Done (Output Events)" 5 \ "Enable Bitstream Compression" TRUE \ -"Enable Outputs (Output Events)" 6 +"Enable Outputs (Output Events)" 6 \ +"Unused IOB Pins" "Pull Up" export SIM_MODEL_PROPERTIES := "" diff --git a/usrp2/top/u1plus/u1plus.ucf b/usrp2/top/u1plus/u1plus.ucf index 8a22d0966..cd89878e3 100644 --- a/usrp2/top/u1plus/u1plus.ucf +++ b/usrp2/top/u1plus/u1plus.ucf @@ -18,14 +18,14 @@ NET "cgen_ref_sel" LOC = "T2" ; NET "cgen_sync_b" LOC = "H15" ; ## FPGA Config -NET "fpga_cfg_din" LOC = "T14" ; -NET "fpga_cfg_cclk" LOC = "R14" ; -NET "fpga_cfg_init_b" LOC = "T12" ; +#NET "fpga_cfg_din" LOC = "T14" ; +#NET "fpga_cfg_cclk" LOC = "R14" ; +#NET "fpga_cfg_init_b" LOC = "T12" ; ## MISC -NET "mystery_bus<2>" LOC = "T11" ; -NET "mystery_bus<1>" LOC = "C4" ; -NET "mystery_bus<0>" LOC = "E7" ; +#NET "mystery_bus<2>" LOC = "T11" ; +#NET "mystery_bus<1>" LOC = "C4" ; +#NET "mystery_bus<0>" LOC = "E7" ; NET "reset_n" LOC = "D5" ; NET "PPS_IN" LOC = "M14" ; NET "reset_codec" LOC = "B14" ; @@ -175,9 +175,9 @@ NET "io_rx<14>" LOC = "A14" ; NET "io_rx<15>" LOC = "A13" ; ## SPI -NET "SEN_AUX" LOC = "C12" ; -NET "SCLK_AUX" LOC = "D12" ; -NET "MISO_AUX" LOC = "J5" ; +#NET "SEN_AUX" LOC = "C12" ; +#NET "SCLK_AUX" LOC = "D12" ; +#NET "MISO_AUX" LOC = "J5" ; NET "SCLK_CODEC" LOC = "K3" ; NET "SEN_CODEC" LOC = "D13" ; NET "MOSI_CODEC" LOC = "C13" ; diff --git a/usrp2/top/u1plus/u1plus.v b/usrp2/top/u1plus/u1plus.v index cb5fbdd36..6ed478420 100644 --- a/usrp2/top/u1plus/u1plus.v +++ b/usrp2/top/u1plus/u1plus.v @@ -1,141 +1,153 @@ +`timescale 1ns / 1ps +////////////////////////////////////////////////////////////////////////////////// module u1plus - (input CLK_FPGA_P, input CLK_FPGA_N, // Main Clock - output FPGA_TXD, input FPGA_RXD, // UART - inout SDA_FPGA, inout SCL_FPGA, // I2C + (input CLK_FPGA_P, input CLK_FPGA_N, // Diff + output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk, + output FPGA_TXD, input FPGA_RXD, - // CGEN - input cgen_st_ld, - input cgen_st_refmon, - input cgen_st_status, - input cgen_ref_sel, - input cgen_sync_b, - - // FPGA Config - input fpga_cfg_din, - input fpga_cfg_cclk, - input fpga_cfg_init_b, - - // MISC - input [2:0] mystery_bus, - input reset_n, - input PPS_IN, - output reset_codec, - // GPIF - inout [15:0] GPIF_D, - input [3:0] GPIF_CTL, - output [3:0] GPIF_RDY, - input FX2_PA7_FLAGD, - input FX2_PA6_PKTEND, - input FX2_PA2_SLOE, + inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output [3:0] GPIF_RDY, + input FX2_PA7_FLAGD, input FX2_PA6_PKTEND, input FX2_PA2_SLOE, input IFCLK, - output [2:0] debug_led, + inout SDA_FPGA, inout SCL_FPGA, // I2C - // Debug bus - output [1:0] debug_clk, - output [31:0] debug, - - input [11:0] adc, - input RXSYNC, - - output TXBLANK, - output TXSYNC, - output [13:0] dac, + output SCLK_TX_DB, output SEN_TX_DB, output MOSI_TX_DB, input MISO_TX_DB, // DB TX SPI + output SCLK_RX_DB, output SEN_RX_DB, output MOSI_RX_DB, input MISO_RX_DB, // DB TX SPI + output SCLK_CODEC, output SEN_CODEC, output MOSI_CODEC, input MISO_CODEC, // AD9862 main SPI - // TX DB - inout [15:0] io_tx, - inout [15:0] io_rx, + input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel, + + inout [15:0] io_tx, inout [15:0] io_rx, - // SPI - output SEN_AUX, output SCLK_AUX, input MISO_AUX, - output SEN_CODEC, output SCLK_CODEC, output MOSI_CODEC, input MISO_CODEC, - output SEN_RX_DB, output SCLK_RX_DB, output MOSI_RX_DB, input MISO_RX_DB, - output SEN_TX_DB, output SCLK_TX_DB, output MOSI_TX_DB, input MISO_TX_DB + output [13:0] dac, output TXSYNC, output TXBLANK, + input [11:0] adc, input RXSYNC, + + input PPS_IN ); - wire clk_fpga, sys_clk, wb_clk, dcm_out, clk_div, dcm_locked; + // ///////////////////////////////////////////////////////////////////////// + // Clocking + wire clk_fpga, clk_fpga_in, reset; + + IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) + clk_fpga_pin (.O(clk_fpga_in),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); + + BUFG clk_fpga_BUFG (.I(clk_fpga_in), .O(clk_fpga)); - IBUFGDS clk_fpga_pin (.O(clk_fpga),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); - defparam clk_fpga_pin.IOSTANDARD = "LVPECL_25"; + reset_sync reset_sync(.clk(clk_fpga), .reset_in(~reset_n), .reset_out(reset)); - DCM DCM_INST (.CLKFB(sys_clk), - .CLKIN(clk_fpga), - .DSSEN(0), - .PSCLK(0), - .PSEN(0), - .PSINCDEC(0), - .RST(dcm_rst), - .CLKDV(clk_div), - .CLKFX(), - .CLKFX180(), - .CLK0(dcm_out), - .CLK2X(), - .CLK2X180(), - .CLK90(), - .CLK180(), - .CLK270(), - .LOCKED(dcm_locked), - .PSDONE(), - .STATUS()); - defparam DCM_INST.CLK_FEEDBACK = "1X"; - defparam DCM_INST.CLKDV_DIVIDE = 2.0; - defparam DCM_INST.CLKFX_DIVIDE = 1; - defparam DCM_INST.CLKFX_MULTIPLY = 4; - defparam DCM_INST.CLKIN_DIVIDE_BY_2 = "FALSE"; - defparam DCM_INST.CLKIN_PERIOD = 15.625; - defparam DCM_INST.CLKOUT_PHASE_SHIFT = "NONE"; - defparam DCM_INST.DESKEW_ADJUST = "SYSTEM_SYNCHRONOUS"; - defparam DCM_INST.DFS_FREQUENCY_MODE = "LOW"; - defparam DCM_INST.DLL_FREQUENCY_MODE = "LOW"; - defparam DCM_INST.DUTY_CYCLE_CORRECTION = "TRUE"; - defparam DCM_INST.FACTORY_JF = 16'h8080; - defparam DCM_INST.PHASE_SHIFT = 0; - defparam DCM_INST.STARTUP_WAIT = "FALSE"; + // ///////////////////////////////////////////////////////////////////////// + // SPI + wire mosi, sclk, miso; + assign { SCLK_TX_DB, MOSI_TX_DB } = ~SEN_TX_DB ? {sclk,mosi} : 2'b0; + assign { SCLK_RX_DB, MOSI_RX_DB } = ~SEN_RX_DB ? {sclk,mosi} : 2'b0; + assign { SCLK_CODEC, MOSI_CODEC } = ~SEN_CODEC ? {sclk,mosi} : 2'b0; + assign miso = (~SEN_TX_DB & MISO_TX_DB) | (~SEN_RX_DB & MISO_RX_DB) | + (~SEN_CODEC & MISO_CODEC); + + // ///////////////////////////////////////////////////////////////////////// + // TX DAC -- handle the interleaved data bus to DAC, with clock doubling DLL + + assign TXBLANK = 0; + wire [13:0] tx_i, tx_q; - BUFG sysclk_BUFG (.I(dcm_out), .O(sys_clk)); - BUFG wbclk_BUFG (.I(clk_div), .O(wb_clk)); + genvar i; + generate + for(i=0;i<14;i=i+1) + begin : gen_dacout + ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + ODDR2_inst (.Q(dac[i]), // 1-bit DDR output data + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D0(tx_i[i]), // 1-bit data input (associated with C0) + .D1(tx_q[i]), // 1-bit data input (associated with C1) + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + end // block: gen_dacout + endgenerate + ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + ODDR2_txsnc (.Q(TXSYNC), // 1-bit DDR output data + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D0(1'b0), // 1-bit data input (associated with C0) + .D1(1'b1), // 1-bit data input (associated with C1) + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input - IOBUF scl_pin(.O(scl_pad_i), .IO(SCL), .I(scl_pad_o), .T(scl_pad_oen_o)); - IOBUF sda_pin(.O(sda_pad_i), .IO(SDA), .I(sda_pad_o), .T(sda_pad_oen_o)); + // ///////////////////////////////////////////////////////////////////////// + // RX ADC -- handles deinterleaving - wire mosi, miso, sclk; - assign SCLK_AUX = ~SEN_AUX ? sclk : 2'b00; - assign {SCLK_CODEC,MOSI_CODEC} = ~SEN_CODEC ? {sclk,mosi} : 2'b00; - assign {SCLK_TX_DB,MOSI_TX_DB} = ~SEN_TX_DB ? {sclk,mosi} : 2'b00; - assign {SCLK_RX_DB,MOSI_RX_DB} = ~SEN_RX_DB ? {sclk,mosi} : 2'b00; - assign miso = (~SEN_CODEC & MISO_CODEC) | (~SEN_AUX & MISO_AUX) | - (~SEN_RX_DB & MISO_RX_DB) |(~SEN_TX_DB & MISO_TX_DB); + reg [11:0] rx_i, rx_q; + wire [11:0] rx_a, rx_b; - u1_core u1_core - (.sys_clk(sys_clk), .sys_rst(sys_rst), - .wb_clk(wb_clk), .wb_rst(wb_rst), - .uart_tx_o(FPGA_TXD), .uart_rx_i(FPGA_RXD), .uart_baud_o(), - - .leds(debug_led), .debug(debug), .debug_clk(debug_clk), - - .scl_pad_i(scl_pad_i), .scl_pad_o(scl_pad_o), .scl_pad_oen_o(scl_pad_oen_o), - .sda_pad_i(sda_pad_i), .sda_pad_o(sda_pad_o), .sda_pad_oen_o(sda_pad_oen_o), - - .pps(PPS_IN), - .reset_codec(reset_codec), - - // GPIF - .gpif_clk(IFCLK), .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_rdy(GPIF_RDY), - .gpif_misc({FX2_PA7_FLAGD, FX2_PA6_PKTEND, FX2_PA2_SLOE}), - - .adc(adc), .rxsync(RXSYNC), - - .txblank(TXBLANK), .txsync(TXSYNC), .dac(dac), - - .io_tx(io_tx), .io_rx(io_rx), - - // SPI - .sclk(sclk), .mosi(mosi), .miso(miso), .sen({SEN_AUX, SEN_CODEC, SEN_RX_DB, SEN_TX_DB}), - .sim_mode(0) - ); + genvar j; + generate + for(j=0;j<12;j=j+1) + begin : gen_adcin + IDDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT_Q0(1'b0), // Sets initial state of the Q0 output to 1’b0 or 1’b1 + .INIT_Q1(1'b0), // Sets initial state of the Q1 output to 1’b0 or 1’b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + IDDR2_inst (.Q0(rx_a[j]), // 1-bit output captured with C0 clock + .Q1(rx_b[j]), // 1-bit output captured with C1 clock + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D(adc[j]), // 1-bit DDR data input + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + end // block: gen_adcin + endgenerate + + IDDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT_Q0(1'b0), // Sets initial state of the Q0 output to 1’b0 or 1’b1 + .INIT_Q1(1'b0), // Sets initial state of the Q1 output to 1’b0 or 1’b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + IDDR2_sync (.Q0(rxsync_0), // 1-bit output captured with C0 clock + .Q1(rxsync_1), // 1-bit output captured with C1 clock + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D(RXSYNC), // 1-bit DDR data input + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input -endmodule // u1plus + always @(posedge clk_fpga) + if(rxsync_0) + begin + rx_i <= rx_a; + rx_q <= rx_b; + end + else + begin + rx_i <= rx_b; + rx_q <= rx_a; + end + + // ///////////////////////////////////////////////////////////////////////// + // Main U1E Core + u1plus_core u1p_c(.clk_fpga(clk_fpga), .rst_fpga(reset), + .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk), + .debug_txd(FPGA_TXD), .debug_rxd(FPGA_RXD), + .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_rdy(GPIF_RDY), + .gpif_misc({FX2_PA7_FLAGD,FX_PA6_PKTEND,FX2_PA2_SLOE}), + .gpif_clk(IFCLK), + .db_sda(db_sda), .db_scl(db_scl), + .sclk(sclk), .sen({SEN_CODEC,SEN_TX_DB,SEN_RX_DB}), .mosi(mosi), .miso(miso), + .cgen_st_status(cgen_st_status), .cgen_st_ld(cgen_st_ld),.cgen_st_refmon(cgen_st_refmon), + .cgen_sync_b(cgen_sync_b), .cgen_ref_sel(cgen_ref_sel), + .io_tx(io_tx), .io_rx(io_rx), + .tx_i(tx_i), .tx_q(tx_q), + .rx_i(rx_i), .rx_q(rx_q), + .pps_in(PPS_IN) ); +endmodule // u1plus diff --git a/usrp2/top/u1plus/u1plus_core.v b/usrp2/top/u1plus/u1plus_core.v new file mode 100644 index 000000000..bcfb0a5fe --- /dev/null +++ b/usrp2/top/u1plus/u1plus_core.v @@ -0,0 +1,424 @@ + + +//`define LOOPBACK 1 +//`define TIMED 1 +`define DSP 1 + +module u1plus_core + (input clk_fpga, input rst_fpga, + output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk, + output debug_txd, input debug_rxd, + + // GPIF + inout [15:0] gpif_d, input [3:0] gpif_ctl, output [3:0] gpif_rdy, + input [2:0] gpif_misc, input gpif_clk, + + inout db_sda, inout db_scl, + output sclk, output [7:0] sen, output mosi, input miso, + + input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel, + inout [15:0] io_tx, inout [15:0] io_rx, + output [13:0] tx_i, output [13:0] tx_q, + input [11:0] rx_i, input [11:0] rx_q, + input pps_in + ); + + localparam TXFIFOSIZE = 11; + localparam RXFIFOSIZE = 11; + + localparam SR_RX_DSP = 0; // 5 regs + localparam SR_RX_CTRL = 8; // 9 regs + localparam SR_TX_DSP = 17; // 5 regs + localparam SR_TX_CTRL = 24; // 2 regs + localparam SR_TIME64 = 28; // 4 regs + + wire wb_clk = clk_fpga; + wire wb_rst = rst_fpga; + + wire pps_int; + wire [63:0] vita_time; + reg [15:0] reg_leds, reg_cgen_ctrl, reg_test, xfer_rate; + + wire [7:0] set_addr; + wire [31:0] set_data; + wire set_stb; + + // ///////////////////////////////////////////////////////////////////////////////////// + // GPMC Slave to Wishbone Master + localparam dw = 16; + localparam aw = 11; + localparam sw = 2; + + wire [dw-1:0] m0_dat_mosi, m0_dat_miso; + wire [aw-1:0] m0_adr; + wire [sw-1:0] m0_sel; + wire m0_cyc, m0_stb, m0_we, m0_ack, m0_err, m0_rty; + + wire [31:0] debug_gpmc; + + wire [35:0] tx_data, rx_data; + wire tx_src_rdy, tx_dst_rdy, rx_src_rdy, rx_dst_rdy; + reg [15:0] tx_frame_len; + wire [15:0] rx_frame_len; + wire [7:0] rate; + + wire bus_error; + + gpif #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE)) + gpif (.arst(wb_rst), + .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE), + .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE), + .EM_NOE(EM_NOE), + + .rx_have_data(rx_have_data), .tx_have_space(tx_have_space), + .bus_error(bus_error), .bus_reset(0), + + .wb_clk(wb_clk), .wb_rst(wb_rst), + .wb_adr_o(m0_adr), .wb_dat_mosi(m0_dat_mosi), .wb_dat_miso(m0_dat_miso), + .wb_sel_o(m0_sel), .wb_cyc_o(m0_cyc), .wb_stb_o(m0_stb), .wb_we_o(m0_we), + .wb_ack_i(m0_ack), + + .fifo_clk(wb_clk), .fifo_rst(wb_rst), + .tx_data_o(tx_data), .tx_src_rdy_o(tx_src_rdy), .tx_dst_rdy_i(tx_dst_rdy), + .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy), + + .tx_frame_len(tx_frame_len), .rx_frame_len(rx_frame_len), + .debug(debug_gpmc)); + + wire rx_sof = rx_data[32]; + wire rx_eof = rx_data[33]; + wire rx_src_rdy_int, rx_dst_rdy_int, tx_src_rdy_int, tx_dst_rdy_int; + +`ifdef LOOPBACK + fifo_cascade #(.WIDTH(36), .SIZE(9)) loopback_fifo + (.clk(wb_clk), .reset(wb_rst), .clear(0), + .datain(tx_data), .src_rdy_i(tx_src_rdy), .dst_rdy_o(tx_dst_rdy), + .dataout(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); +`endif // LOOPBACK + +`ifdef TIMED + + // TX side + wire tx_enable; + + fifo_pacer tx_pacer + (.clk(wb_clk), .reset(wb_rst), .rate(rate), .enable(tx_enable), + .src1_rdy_i(tx_src_rdy), .dst1_rdy_o(tx_dst_rdy), + .src2_rdy_o(tx_src_rdy_int), .dst2_rdy_i(tx_dst_rdy_int), + .underrun(tx_underrun), .overrun()); + + packet_verifier32 pktver32 + (.clk(wb_clk), .reset(wb_rst), .clear(clear), + .data_i(tx_data), .src_rdy_i(tx_src_rdy_int), .dst_rdy_o(tx_dst_rdy_int), + .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err)); + + // RX side + wire rx_enable; + + packet_generator32 pktgen32 + (.clk(wb_clk), .reset(wb_rst), .clear(clear), + .data_o(rx_data), .src_rdy_o(rx_src_rdy_int), .dst_rdy_i(rx_dst_rdy_int)); + + fifo_pacer rx_pacer + (.clk(wb_clk), .reset(wb_rst), .rate(rate), .enable(rx_enable), + .src1_rdy_i(rx_src_rdy_int), .dst1_rdy_o(rx_dst_rdy_int), + .src2_rdy_o(rx_src_rdy), .dst2_rdy_i(rx_dst_rdy), + .underrun(), .overrun(rx_overrun)); + +`endif // `ifdef TIMED + +`ifdef DSP + wire [31:0] debug_rx_dsp, vrc_debug, vrf_debug; + + // ///////////////////////////////////////////////////////////////////////// + // DSP RX + wire [31:0] sample_rx, sample_tx; + wire strobe_rx, strobe_tx; + wire rx1_dst_rdy, rx1_src_rdy; + wire [99:0] rx1_data; + wire run_rx; + + + dsp_core_rx #(.BASE(SR_RX_DSP)) dsp_core_rx + (.clk(wb_clk),.rst(wb_rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .adc_a({rx_i,2'b0}),.adc_ovf_a(0),.adc_b({rx_q,2'b0}),.adc_ovf_b(0), + .sample(sample_rx), .run(run_rx), .strobe(strobe_rx), + .debug(debug_rx_dsp) ); + + vita_rx_control #(.BASE(SR_RX_CTRL), .WIDTH(32)) vita_rx_control + (.clk(wb_clk), .reset(wb_rst), .clear(0), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .vita_time(vita_time), .overrun(overrun), + .sample(sample_rx), .run(run_rx), .strobe(strobe_rx), + .sample_fifo_o(rx1_data), .sample_fifo_dst_rdy_i(rx1_dst_rdy), .sample_fifo_src_rdy_o(rx1_src_rdy), + .debug_rx(vrc_debug)); + + vita_rx_framer #(.BASE(SR_RX_CTRL), .MAXCHAN(1)) vita_rx_framer + (.clk(wb_clk), .reset(wb_rst), .clear(0), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .sample_fifo_i(rx1_data), .sample_fifo_dst_rdy_o(rx1_dst_rdy), .sample_fifo_src_rdy_i(rx1_src_rdy), + .data_o(rx_data), .dst_rdy_i(rx_dst_rdy), .src_rdy_o(rx_src_rdy), + .fifo_occupied(), .fifo_full(), .fifo_empty(), + .debug_rx(vrf_debug) ); + + // /////////////////////////////////////////////////////////////////////////////////// + // DSP TX + + wire [99:0] tx1_data; + wire tx1_src_rdy, tx1_dst_rdy; + wire [15:0] tx_i_int, tx_q_int; + wire [31:0] debug_vtc, debug_vtd, debug_vt; + wire run_tx; + + vita_tx_deframer #(.BASE(SR_TX_CTRL), .MAXCHAN(1)) vita_tx_deframer + (.clk(wb_clk), .reset(wb_rst), .clear(0), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .data_i(tx_data), .src_rdy_i(tx_src_rdy), .dst_rdy_o(tx_dst_rdy), + .sample_fifo_o(tx1_data), .sample_fifo_src_rdy_o(tx1_src_rdy), .sample_fifo_dst_rdy_i(tx1_dst_rdy), + .debug(debug_vtd) ); + + vita_tx_control #(.BASE(SR_TX_CTRL), .WIDTH(32)) vita_tx_control + (.clk(wb_clk), .reset(wb_rst), .clear(0), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .vita_time(vita_time),.underrun(underrun), + .sample_fifo_i(tx1_data), .sample_fifo_src_rdy_i(tx1_src_rdy), .sample_fifo_dst_rdy_o(tx1_dst_rdy), + .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), + .debug(debug_vtc) ); + + dsp_core_tx #(.BASE(SR_TX_DSP)) dsp_core_tx + (.clk(wb_clk),.rst(wb_rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), + .dac_a(tx_i_int),.dac_b(tx_q_int), + .debug(debug_tx_dsp) ); + + assign tx_i = tx_i_int[15:2]; + assign tx_q = tx_q_int[15:2]; + +`else // !`ifdef DSP + // Dummy DSP signal generator for test purposes + wire [23:0] tx_i_int, tx_q_int; + wire [23:0] freq = {reg_test,8'd0}; + reg [23:0] phase; + + always @(posedge wb_clk) + phase <= phase + freq; + + cordic_z24 #(.bitwidth(24)) tx_cordic + (.clock(wb_clk), .reset(wb_rst), .enable(1), + .xi(24'd2500000), .yi(24'd0), .zi(phase), .xo(tx_i_int), .yo(tx_q_int), .zo()); + + assign tx_i = tx_i_int[23:10]; + assign tx_q = tx_q_int[23:10]; +`endif // !`ifdef DSP + + // ///////////////////////////////////////////////////////////////////////////////////// + // Wishbone Intercon, single master + wire [dw-1:0] s0_dat_mosi, s1_dat_mosi, s0_dat_miso, s1_dat_miso, s2_dat_mosi, s3_dat_mosi, s2_dat_miso, s3_dat_miso, + s4_dat_mosi, s5_dat_mosi, s4_dat_miso, s5_dat_miso, s6_dat_mosi, s7_dat_mosi, s6_dat_miso, s7_dat_miso, + s8_dat_mosi, s9_dat_mosi, s8_dat_miso, s9_dat_miso, sa_dat_mosi, sb_dat_mosi, sa_dat_miso, sb_dat_miso, + sc_dat_mosi, sd_dat_mosi, sc_dat_miso, sd_dat_miso, se_dat_mosi, sf_dat_mosi, se_dat_miso, sf_dat_miso; + wire [aw-1:0] s0_adr,s1_adr,s2_adr,s3_adr,s4_adr,s5_adr,s6_adr,s7_adr; + wire [aw-1:0] s8_adr,s9_adr,sa_adr,sb_adr,sc_adr, sd_adr, se_adr, sf_adr; + wire [sw-1:0] s0_sel,s1_sel,s2_sel,s3_sel,s4_sel,s5_sel,s6_sel,s7_sel; + wire [sw-1:0] s8_sel,s9_sel,sa_sel,sb_sel,sc_sel, sd_sel, se_sel, sf_sel; + wire s0_ack,s1_ack,s2_ack,s3_ack,s4_ack,s5_ack,s6_ack,s7_ack; + wire s8_ack,s9_ack,sa_ack,sb_ack,sc_ack, sd_ack, se_ack, sf_ack; + wire s0_stb,s1_stb,s2_stb,s3_stb,s4_stb,s5_stb,s6_stb,s7_stb; + wire s8_stb,s9_stb,sa_stb,sb_stb,sc_stb, sd_stb, se_stb, sf_stb; + wire s0_cyc,s1_cyc,s2_cyc,s3_cyc,s4_cyc,s5_cyc,s6_cyc,s7_cyc; + wire s8_cyc,s9_cyc,sa_cyc,sb_cyc,sc_cyc, sd_cyc, se_cyc, sf_cyc; + wire s0_we,s1_we,s2_we,s3_we,s4_we,s5_we,s6_we,s7_we; + wire s8_we,s9_we,sa_we,sb_we,sc_we,sd_we, se_we, sf_we; + + wb_1master #(.dw(dw), .aw(aw), .sw(sw), .decode_w(4), + .s0_addr(4'h0), .s0_mask(4'hF), .s1_addr(4'h1), .s1_mask(4'hF), + .s2_addr(4'h2), .s2_mask(4'hF), .s3_addr(4'h3), .s3_mask(4'hF), + .s4_addr(4'h4), .s4_mask(4'hF), .s5_addr(4'h5), .s5_mask(4'hF), + .s6_addr(4'h6), .s6_mask(4'hF), .s7_addr(4'h7), .s7_mask(4'hF), + .s8_addr(4'h8), .s8_mask(4'hF), .s9_addr(4'h9), .s9_mask(4'hF), + .sa_addr(4'ha), .sa_mask(4'hF), .sb_addr(4'hb), .sb_mask(4'hF), + .sc_addr(4'hc), .sc_mask(4'hF), .sd_addr(4'hd), .sd_mask(4'hF), + .se_addr(4'he), .se_mask(4'hF), .sf_addr(4'hf), .sf_mask(4'hF)) + wb_1master + (.clk_i(wb_clk),.rst_i(wb_rst), + .m0_dat_o(m0_dat_miso),.m0_ack_o(m0_ack),.m0_err_o(m0_err),.m0_rty_o(m0_rty),.m0_dat_i(m0_dat_mosi), + .m0_adr_i(m0_adr),.m0_sel_i(m0_sel),.m0_we_i(m0_we),.m0_cyc_i(m0_cyc),.m0_stb_i(m0_stb), + .s0_dat_o(s0_dat_mosi),.s0_adr_o(s0_adr),.s0_sel_o(s0_sel),.s0_we_o(s0_we),.s0_cyc_o(s0_cyc),.s0_stb_o(s0_stb), + .s0_dat_i(s0_dat_miso),.s0_ack_i(s0_ack),.s0_err_i(0),.s0_rty_i(0), + .s1_dat_o(s1_dat_mosi),.s1_adr_o(s1_adr),.s1_sel_o(s1_sel),.s1_we_o(s1_we),.s1_cyc_o(s1_cyc),.s1_stb_o(s1_stb), + .s1_dat_i(s1_dat_miso),.s1_ack_i(s1_ack),.s1_err_i(0),.s1_rty_i(0), + .s2_dat_o(s2_dat_mosi),.s2_adr_o(s2_adr),.s2_sel_o(s2_sel),.s2_we_o(s2_we),.s2_cyc_o(s2_cyc),.s2_stb_o(s2_stb), + .s2_dat_i(s2_dat_miso),.s2_ack_i(s2_ack),.s2_err_i(0),.s2_rty_i(0), + .s3_dat_o(s3_dat_mosi),.s3_adr_o(s3_adr),.s3_sel_o(s3_sel),.s3_we_o(s3_we),.s3_cyc_o(s3_cyc),.s3_stb_o(s3_stb), + .s3_dat_i(s3_dat_miso),.s3_ack_i(s3_ack),.s3_err_i(0),.s3_rty_i(0), + .s4_dat_o(s4_dat_mosi),.s4_adr_o(s4_adr),.s4_sel_o(s4_sel),.s4_we_o(s4_we),.s4_cyc_o(s4_cyc),.s4_stb_o(s4_stb), + .s4_dat_i(s4_dat_miso),.s4_ack_i(s4_ack),.s4_err_i(0),.s4_rty_i(0), + .s5_dat_o(s5_dat_mosi),.s5_adr_o(s5_adr),.s5_sel_o(s5_sel),.s5_we_o(s5_we),.s5_cyc_o(s5_cyc),.s5_stb_o(s5_stb), + .s5_dat_i(s5_dat_miso),.s5_ack_i(s5_ack),.s5_err_i(0),.s5_rty_i(0), + .s6_dat_o(s6_dat_mosi),.s6_adr_o(s6_adr),.s6_sel_o(s6_sel),.s6_we_o(s6_we),.s6_cyc_o(s6_cyc),.s6_stb_o(s6_stb), + .s6_dat_i(s6_dat_miso),.s6_ack_i(s6_ack),.s6_err_i(0),.s6_rty_i(0), + .s7_dat_o(s7_dat_mosi),.s7_adr_o(s7_adr),.s7_sel_o(s7_sel),.s7_we_o(s7_we),.s7_cyc_o(s7_cyc),.s7_stb_o(s7_stb), + .s7_dat_i(s7_dat_miso),.s7_ack_i(s7_ack),.s7_err_i(0),.s7_rty_i(0), + .s8_dat_o(s8_dat_mosi),.s8_adr_o(s8_adr),.s8_sel_o(s8_sel),.s8_we_o(s8_we),.s8_cyc_o(s8_cyc),.s8_stb_o(s8_stb), + .s8_dat_i(s8_dat_miso),.s8_ack_i(s8_ack),.s8_err_i(0),.s8_rty_i(0), + .s9_dat_o(s9_dat_mosi),.s9_adr_o(s9_adr),.s9_sel_o(s9_sel),.s9_we_o(s9_we),.s9_cyc_o(s9_cyc),.s9_stb_o(s9_stb), + .s9_dat_i(s9_dat_miso),.s9_ack_i(s9_ack),.s9_err_i(0),.s9_rty_i(0), + .sa_dat_o(sa_dat_mosi),.sa_adr_o(sa_adr),.sa_sel_o(sa_sel),.sa_we_o(sa_we),.sa_cyc_o(sa_cyc),.sa_stb_o(sa_stb), + .sa_dat_i(sa_dat_miso),.sa_ack_i(sa_ack),.sa_err_i(0),.sa_rty_i(0), + .sb_dat_o(sb_dat_mosi),.sb_adr_o(sb_adr),.sb_sel_o(sb_sel),.sb_we_o(sb_we),.sb_cyc_o(sb_cyc),.sb_stb_o(sb_stb), + .sb_dat_i(sb_dat_miso),.sb_ack_i(sb_ack),.sb_err_i(0),.sb_rty_i(0), + .sc_dat_o(sc_dat_mosi),.sc_adr_o(sc_adr),.sc_sel_o(sc_sel),.sc_we_o(sc_we),.sc_cyc_o(sc_cyc),.sc_stb_o(sc_stb), + .sc_dat_i(sc_dat_miso),.sc_ack_i(sc_ack),.sc_err_i(0),.sc_rty_i(0), + .sd_dat_o(sd_dat_mosi),.sd_adr_o(sd_adr),.sd_sel_o(sd_sel),.sd_we_o(sd_we),.sd_cyc_o(sd_cyc),.sd_stb_o(sd_stb), + .sd_dat_i(sd_dat_miso),.sd_ack_i(sd_ack),.sd_err_i(0),.sd_rty_i(0), + .se_dat_o(se_dat_mosi),.se_adr_o(se_adr),.se_sel_o(se_sel),.se_we_o(se_we),.se_cyc_o(se_cyc),.se_stb_o(se_stb), + .se_dat_i(se_dat_miso),.se_ack_i(se_ack),.se_err_i(0),.se_rty_i(0), + .sf_dat_o(sf_dat_mosi),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb), + .sf_dat_i(sf_dat_miso),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0) ); + + assign s7_ack = 0; + assign s8_ack = 0; assign s9_ack = 0; assign sa_ack = 0; assign sb_ack = 0; + assign sc_ack = 0; assign sd_ack = 0; assign se_ack = 0; assign sf_ack = 0; + + // ///////////////////////////////////////////////////////////////////////////////////// + // Slave 0, Misc LEDs, Switches, controls + + localparam REG_LEDS = 7'd0; // out + localparam REG_SWITCHES = 7'd2; // in + localparam REG_CGEN_CTRL = 7'd4; // out + localparam REG_CGEN_ST = 7'd6; // in + localparam REG_TEST = 7'd8; // out + localparam REG_RX_FRAMELEN = 7'd10; // out + localparam REG_TX_FRAMELEN = 7'd12; // in + localparam REG_XFER_RATE = 7'd14; // in + + always @(posedge wb_clk) + if(wb_rst) + begin + reg_leds <= 0; + reg_cgen_ctrl <= 2'b11; + reg_test <= 0; + tx_frame_len <= 0; + xfer_rate <= 0; + end + else + if(s0_cyc & s0_stb & s0_we) + case(s0_adr[6:0]) + REG_LEDS : + reg_leds <= s0_dat_mosi; + REG_CGEN_CTRL : + reg_cgen_ctrl <= s0_dat_mosi; + REG_TEST : + reg_test <= s0_dat_mosi; + REG_TX_FRAMELEN : + tx_frame_len <= s0_dat_mosi; + REG_XFER_RATE : + xfer_rate <= s0_dat_mosi; + endcase // case (s0_adr[6:0]) + + assign tx_enable = xfer_rate[15]; + assign rx_enable = xfer_rate[14]; + assign rate = xfer_rate[7:0]; + + assign { debug_led[2],debug_led[0],debug_led[1] } = reg_leds; // LEDs are arranged funny on board + assign { cgen_sync_b, cgen_ref_sel } = reg_cgen_ctrl; + //assign { rx_overrun, tx_underrun } = 0; // reg_test; + + assign s0_dat_miso = (s0_adr[6:0] == REG_LEDS) ? reg_leds : + //(s0_adr[6:0] == REG_SWITCHES) ? {5'b0,debug_pb[2:0],dip_sw[7:0]} : + (s0_adr[6:0] == REG_CGEN_CTRL) ? reg_cgen_ctrl : + (s0_adr[6:0] == REG_CGEN_ST) ? {13'b0,cgen_st_status,cgen_st_ld,cgen_st_refmon} : + (s0_adr[6:0] == REG_TEST) ? reg_test : + (s0_adr[6:0] == REG_RX_FRAMELEN) ? rx_frame_len : + 16'hBEEF; + + assign s0_ack = s0_stb & s0_cyc; + + // ///////////////////////////////////////////////////////////////////////////////////// + // Slave 1, UART + // depth of 3 is 128 entries, clkdiv of 278 gives 230.4k with a 64 MHz system clock + + simple_uart #(.TXDEPTH(3),.RXDEPTH(3), .CLKDIV_DEFAULT(278)) uart + (.clk_i(wb_clk),.rst_i(wb_rst), + .we_i(s1_we),.stb_i(s1_stb),.cyc_i(s1_cyc),.ack_o(s1_ack), + .adr_i(s1_adr[3:1]),.dat_i({16'd0,s1_dat_mosi}),.dat_o(s1_dat_miso), + .rx_int_o(),.tx_int_o(), + .tx_o(debug_txd),.rx_i(debug_rxd),.baud_o()); + + // ///////////////////////////////////////////////////////////////////////////////////// + // Slave 2, SPI + + spi_top16 shared_spi + (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.wb_adr_i(s2_adr[4:0]),.wb_dat_i(s2_dat_mosi), + .wb_dat_o(s2_dat_miso),.wb_sel_i(s2_sel),.wb_we_i(s2_we),.wb_stb_i(s2_stb), + .wb_cyc_i(s2_cyc),.wb_ack_o(s2_ack),.wb_err_o(),.wb_int_o(), + .ss_pad_o(sen), .sclk_pad_o(sclk), .mosi_pad_o(mosi), .miso_pad_i(miso) ); + + // ///////////////////////////////////////////////////////////////////////// + // Slave 3, I2C + + wire scl_pad_i, scl_pad_o, scl_pad_oen_o, sda_pad_i, sda_pad_o, sda_pad_oen_o; + i2c_master_top #(.ARST_LVL(1)) i2c + (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.arst_i(1'b0), + .wb_adr_i(s3_adr[4:2]),.wb_dat_i(s3_dat_mosi[7:0]),.wb_dat_o(s3_dat_miso[7:0]), + .wb_we_i(s3_we),.wb_stb_i(s3_stb),.wb_cyc_i(s3_cyc), + .wb_ack_o(s3_ack),.wb_inta_o(), + .scl_pad_i(scl_pad_i),.scl_pad_o(scl_pad_o),.scl_padoen_o(scl_pad_oen_o), + .sda_pad_i(sda_pad_i),.sda_pad_o(sda_pad_o),.sda_padoen_o(sda_pad_oen_o) ); + + assign s3_dat_miso[15:8] = 8'd0; + + // I2C -- Don't use external transistors for open drain, the FPGA implements this + IOBUF scl_pin(.O(scl_pad_i), .IO(db_scl), .I(scl_pad_o), .T(scl_pad_oen_o)); + IOBUF sda_pin(.O(sda_pad_i), .IO(db_sda), .I(sda_pad_o), .T(sda_pad_oen_o)); + + // ///////////////////////////////////////////////////////////////////////// + // GPIOs -- Slave #4 + + wire [31:0] atr_lines; + wire [31:0] debug_gpio_0, debug_gpio_1; + + nsgpio16LE + nsgpio16LE(.clk_i(wb_clk),.rst_i(wb_rst), + .cyc_i(s4_cyc),.stb_i(s4_stb),.adr_i(s4_adr[3:0]),.we_i(s4_we), + .dat_i(s4_dat_mosi),.dat_o(s4_dat_miso),.ack_o(s4_ack), + .atr(atr_lines),.debug_0(debug_gpio_0),.debug_1(debug_gpio_1), + .gpio( {io_tx,io_rx} ) ); + + // ///////////////////////////////////////////////////////////////////////// + // Settings Bus -- Slave #5 + + // only have 32 regs, 32 bits each with current setup... + settings_bus_16LE #(.AWIDTH(11),.RWIDTH(11-4-2)) settings_bus_16LE + (.wb_clk(wb_clk),.wb_rst(wb_rst),.wb_adr_i(s5_adr),.wb_dat_i(s5_dat_mosi), + .wb_stb_i(s5_stb),.wb_we_i(s5_we),.wb_ack_o(s5_ack), + .strobe(set_stb),.addr(set_addr),.data(set_data) ); + + // ///////////////////////////////////////////////////////////////////////// + // ATR Controller -- Slave #6 + + atr_controller16 atr_controller16 + (.clk_i(wb_clk), .rst_i(wb_rst), + .adr_i(s6_adr), .sel_i(s6_sel), .dat_i(s6_dat_mosi), .dat_o(s6_dat_miso), + .we_i(s6_we), .stb_i(s6_stb), .cyc_i(s6_cyc), .ack_o(s6_ack), + .run_rx(0), .run_tx(0), .ctrl_lines(atr_lines)); + + + // ///////////////////////////////////////////////////////////////////////// + // VITA Timing + + time_64bit #(.TICKS_PER_SEC(32'd64000000),.BASE(SR_TIME64)) time_64bit + (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .pps(pps_in), .vita_time(vita_time), .pps_int(pps_int)); + + // ///////////////////////////////////////////////////////////////////////////////////// + // Debug circuitry + + assign debug_clk = { 1'b0, clk_fpga }; + assign debug = 0; + assign debug_gpio_0 = 0; + assign debug_gpio_1 = 0; + +endmodule // u1plus_core |