diff options
Diffstat (limited to 'usrp2/top/u1e/u1e.v')
| -rw-r--r-- | usrp2/top/u1e/u1e.v | 68 |
1 files changed, 61 insertions, 7 deletions
diff --git a/usrp2/top/u1e/u1e.v b/usrp2/top/u1e/u1e.v index 35818e8c8..3018ff100 100644 --- a/usrp2/top/u1e/u1e.v +++ b/usrp2/top/u1e/u1e.v @@ -26,18 +26,46 @@ module u1e inout [15:0] io_tx, inout [15:0] io_rx, - output [13:0] TX, output TXSYNC, output TXBLANK, - + output reg [13:0] TX, output reg TXSYNC, output TXBLANK, + input [11:0] DA, input [11:0] DB, input RXSYNC, + input PPS_IN ); - // FPGA-specific pins connections - wire clk_fpga; + // ///////////////////////////////////////////////////////////////////////// + // Clocking + wire clk_fpga, clk_fpga_in, clk_2x, dcm_rst, dcm_locked; IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) - clk_fpga_pin (.O(clk_fpga),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); + clk_fpga_pin (.O(clk_fpga_in),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); + + DCM #(.CLK_FEEDBACK ( "1X" ), + .CLKDV_DIVIDE ( 2.0 ), + .CLKFX_DIVIDE ( 1 ), + .CLKFX_MULTIPLY ( 2 ), + .CLKIN_DIVIDE_BY_2 ( "FALSE" ), + .CLKIN_PERIOD ( 15.625 ), + .CLKOUT_PHASE_SHIFT ( "NONE" ), + .DESKEW_ADJUST ( "SYSTEM_SYNCHRONOUS" ), + .DFS_FREQUENCY_MODE ( "LOW" ), + .DLL_FREQUENCY_MODE ( "LOW" ), + .DUTY_CYCLE_CORRECTION ( "TRUE" ), + .FACTORY_JF ( 16'h8080 ), + .PHASE_SHIFT ( 0 ), + .STARTUP_WAIT ( "FALSE" )) + clk_doubler (.CLKFB(clk_fpga), .CLKIN(clk_fpga_in), .RST(dcm_rst), + .DSSEN(0), .PSCLK(0), .PSEN(0), .PSINCDEC(0), .PSDONE(), + .CLKDV(), .CLKFX(), .CLKFX180(), + .CLK2X(clk_2x), .CLK2X180(), + .CLK0(clk_fpga), .CLK90(), .CLK180(), .CLK270(), + .LOCKED(dcm_locked), .STATUS()); + + //BUFG dspclk_BUFG (.I(dcm_out), .O(dsp_clk)); + //BUFG wbclk_BUFG (.I(clk_div), .O(wb_clk)); + - // SPI pins + // ///////////////////////////////////////////////////////////////////////// + // SPI wire mosi, sclk, miso; assign { db_sclk_tx, db_mosi_tx } = ~db_sen_tx ? {sclk,mosi} : 2'b0; assign { db_sclk_rx, db_mosi_rx } = ~db_sen_rx ? {sclk,mosi} : 2'b0; @@ -45,7 +73,27 @@ module u1e assign { cgen_sclk, cgen_mosi } = ~cgen_sen_b ? {sclk,mosi} : 2'b0; assign miso = (~db_sen_tx & db_miso_tx) | (~db_sen_rx & db_miso_rx) | (~sen_codec & miso_codec) | (~cgen_sen_b & cgen_miso); + + // ///////////////////////////////////////////////////////////////////////// + // TX DAC -- handle the interleaved data bus to DAC, with clock doubling DLL + + assign TXBLANK = 0; + wire [13:0] tx_i, tx_q; + always @(posedge clk_2x) + if(clk_fpga) + begin + TX <= tx_i; + TXSYNC <= 0; // Low indicates first data item + end + else + begin + TX <= tx_q; + TXSYNC <= 1; + end + + // ///////////////////////////////////////////////////////////////////////// + // Main U1E Core u1e_core u1e_core(.clk_fpga(clk_fpga), .rst_fpga(~debug_pb[2]), .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk), .debug_pb(~debug_pb), .dip_sw(dip_sw), .debug_txd(FPGA_TXD), .debug_rxd(FPGA_RXD), @@ -59,10 +107,16 @@ module u1e .tx_have_space(overo_gpio144), .tx_underrun(overo_gpio145), .rx_have_data(overo_gpio146), .rx_overrun(overo_gpio147), .io_tx(io_tx), .io_rx(io_rx), - .tx(TX), .txsync(TXSYNC), .txblank(TXBLANK), + .tx_i(tx_i), .tx_q(tx_q), + .rx_i(DA), .rx_q(DB), .misc_gpio( {{overo_gpio128,overo_gpio163,overo_gpio170,overo_gpio176}, {overo_gpio0,overo_gpio14,overo_gpio21,overo_gpio22}, {overo_gpio23,overo_gpio64,overo_gpio65,overo_gpio127}}), .pps_in(PPS_IN) ); + + // ///////////////////////////////////////////////////////////////////////// + // Local Debug + // assign debug_clk = {clk_fpga, clk_2x }; + // assign debug = { TXSYNC, TXBLANK, TX }; endmodule // u1e |