diff options
Diffstat (limited to 'usrp2/top/N2x0')
| -rw-r--r-- | usrp2/top/N2x0/u2plus_core.v | 42 |
1 files changed, 38 insertions, 4 deletions
diff --git a/usrp2/top/N2x0/u2plus_core.v b/usrp2/top/N2x0/u2plus_core.v index 369f01183..3459bbc6f 100644 --- a/usrp2/top/N2x0/u2plus_core.v +++ b/usrp2/top/N2x0/u2plus_core.v @@ -373,6 +373,10 @@ module u2plus_core wire wr3_ready_i, wr3_ready_o; wire [35:0] wr0_dat, wr1_dat, wr2_dat, wr3_dat; + wire [35:0] srb_wr_data, srb_rd_data; + wire srb_wr_ready, srb_rd_ready; + wire srb_wr_valid, srb_rd_valid; + wire [35:0] tx_err_data; wire tx_err_src_rdy, tx_err_dst_rdy; @@ -393,10 +397,12 @@ module u2plus_core .dsp0_inp_data(wr1_dat), .dsp0_inp_valid(wr1_ready_i), .dsp0_inp_ready(wr1_ready_o), .dsp1_inp_data(wr3_dat), .dsp1_inp_valid(wr3_ready_i), .dsp1_inp_ready(wr3_ready_o), .eth_inp_data(wr2_dat), .eth_inp_valid(wr2_ready_i), .eth_inp_ready(wr2_ready_o), - .err_inp_data(tx_err_data), .err_inp_ready(tx_err_dst_rdy), .err_inp_valid(tx_err_src_rdy), + .err_inp_data(tx_err_data), .err_inp_valid(tx_err_src_rdy), .err_inp_ready(tx_err_dst_rdy), + .ctl_inp_data(srb_wr_data), .ctl_inp_valid(srb_wr_valid), .ctl_inp_ready(srb_wr_ready), .ser_out_data(rd0_dat), .ser_out_valid(rd0_ready_o), .ser_out_ready(rd0_ready_i), .dsp_out_data(rd1_dat), .dsp_out_valid(rd1_ready_o), .dsp_out_ready(rd1_ready_i), + .ctl_out_data(srb_rd_data), .ctl_out_valid(srb_rd_valid), .ctl_out_ready(srb_rd_ready), .eth_out_data(rd2_dat), .eth_out_valid(rd2_ready_o), .eth_out_ready(rd2_ready_i) ); @@ -437,13 +443,13 @@ module u2plus_core //compatibility number -> increment when the fpga has been sufficiently altered localparam compat_num = {16'd9, 16'd0}; //major, minor - wire [31:0] churn = status; //tweak churn until timing meets! + wire [31:0] churn = 0; //tweak churn until timing meets! wb_readback_mux buff_pool_status (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb), .wb_adr_i(s5_adr), .wb_dat_o(s5_dat_i), .wb_ack_o(s5_ack), - .word00(churn),.word01(32'b0),.word02(32'b0),.word03(32'b0), + .word00(32'b0),.word01(32'b0),.word02(32'b0),.word03(32'b0), .word04(32'b0),.word05(32'b0),.word06(32'b0),.word07(32'b0), .word08(status),.word09(gpio_readback),.word10(vita_time[63:32]), .word11(vita_time[31:0]),.word12(compat_num),.word13({18'b0, button, 1'b0, clk_status, serdes_link_up, 10'b0}), @@ -477,9 +483,18 @@ module u2plus_core assign s7_dat_i = 32'd0; + wire set_stb_dsp0, set_stb_dsp1; + wire [31:0] set_data_dsp0, set_data_dsp1; + wire [7:0] set_addr_dsp0, set_addr_dsp1; + + //mux settings_bus_crossclock and settings_readback_bus_fifo_ctrl with prio + assign set_stb_dsp = set_stb_dsp0 | set_stb_dsp1; + assign set_addr_dsp = set_stb_dsp0? set_addr_dsp0 : set_addr_dsp1; + assign set_data_dsp = set_stb_dsp0? set_data_dsp0 : set_data_dsp1; + settings_bus_crossclock settings_bus_crossclock (.clk_i(wb_clk), .rst_i(wb_rst), .set_stb_i(set_stb), .set_addr_i(set_addr), .set_data_i(set_data), - .clk_o(dsp_clk), .rst_o(dsp_rst), .set_stb_o(set_stb_dsp), .set_addr_o(set_addr_dsp), .set_data_o(set_data_dsp)); + .clk_o(dsp_clk), .rst_o(dsp_rst), .set_stb_o(set_stb_dsp0), .set_addr_o(set_addr_dsp0), .set_data_o(set_data_dsp0)); user_settings #(.BASE(SR_USER_REGS)) user_settings (.clk(dsp_clk),.rst(dsp_rst),.set_stb(set_stb_dsp), @@ -487,6 +502,25 @@ module u2plus_core .set_addr_user(set_addr_user),.set_data_user(set_data_user), .set_stb_user(set_stb_user) ); + // ///////////////////////////////////////////////////////////////////////// + // Settings + Readback Bus -- FIFO controlled + + wire [31:0] srb_debug; + settings_readback_bus_fifo_ctrl #(.PROT_DEST(3)) srb + ( + .clock(dsp_clk), .reset(dsp_rst), + .vita_time(vita_time), + .in_data(srb_rd_data), .in_valid(srb_rd_valid), .in_ready(srb_rd_ready), + .out_data(srb_wr_data), .out_valid(srb_wr_valid), .out_ready(srb_wr_ready), + .strobe(set_stb_dsp1), .addr(set_addr_dsp1), .data(set_data_dsp1), + .word00(32'b0),.word01(32'b0),.word02(32'b0),.word03(32'b0), + .word04(32'b0),.word05(32'b0),.word06(32'b0),.word07(32'b0), + .word08(status),.word09(gpio_readback),.word10(vita_time[63:32]), + .word11(vita_time[31:0]),.word12(compat_num),.word13({18'b0, button, 1'b0, clk_status, serdes_link_up, 10'b0}), + .word14(vita_time_pps[63:32]),.word15(vita_time_pps[31:0]), + .debug(srb_debug) + ); + // Output control lines wire [7:0] clock_outs, serdes_outs, adc_outs; assign {clock_ready, clk_en[1:0], clk_sel[1:0]} = clock_outs[4:0]; |