diff options
Diffstat (limited to 'usrp2/top/N2x0')
| -rw-r--r-- | usrp2/top/N2x0/u2plus_core.v | 15 |
1 files changed, 10 insertions, 5 deletions
diff --git a/usrp2/top/N2x0/u2plus_core.v b/usrp2/top/N2x0/u2plus_core.v index 6b915698a..27a5af833 100644 --- a/usrp2/top/N2x0/u2plus_core.v +++ b/usrp2/top/N2x0/u2plus_core.v @@ -488,12 +488,13 @@ module u2plus_core //mux settings_bus_crossclock and settings_readback_bus_fifo_ctrl with prio assign set_stb_dsp = set_stb_dsp0 | set_stb_dsp1; - assign set_addr_dsp = set_stb_dsp0? set_addr_dsp0 : set_addr_dsp1; - assign set_data_dsp = set_stb_dsp0? set_data_dsp0 : set_data_dsp1; + assign set_addr_dsp = set_stb_dsp1? set_addr_dsp1 : set_addr_dsp0; + assign set_data_dsp = set_stb_dsp1? set_data_dsp1 : set_data_dsp0; - settings_bus_crossclock settings_bus_crossclock + settings_bus_crossclock #(.FLOW_CTRL(1/*on*/)) settings_bus_crossclock (.clk_i(wb_clk), .rst_i(wb_rst), .set_stb_i(set_stb), .set_addr_i(set_addr), .set_data_i(set_data), - .clk_o(dsp_clk), .rst_o(dsp_rst), .set_stb_o(set_stb_dsp0), .set_addr_o(set_addr_dsp0), .set_data_o(set_data_dsp0)); + .clk_o(dsp_clk), .rst_o(dsp_rst), .set_stb_o(set_stb_dsp0), .set_addr_o(set_addr_dsp0), .set_data_o(set_data_dsp0), + .blocked(set_stb_dsp1)); user_settings #(.BASE(SR_USER_REGS)) user_settings (.clk(dsp_clk),.rst(dsp_rst),.set_stb(set_stb_dsp), @@ -505,9 +506,10 @@ module u2plus_core // Settings + Readback Bus -- FIFO controlled wire [31:0] srb_debug; + wire srb_clear; settings_readback_bus_fifo_ctrl #(.PROT_DEST(3)) srb ( - .clock(dsp_clk), .reset(dsp_rst), .clear(0), + .clock(dsp_clk), .reset(dsp_rst), .clear(srb_clear), .vita_time(vita_time), .in_data(srb_rd_data), .in_valid(srb_rd_valid), .in_ready(srb_rd_ready), .out_data(srb_wr_data), .out_valid(srb_wr_valid), .out_ready(srb_wr_ready), @@ -520,6 +522,9 @@ module u2plus_core .debug(srb_debug) ); + setting_reg #(.my_addr(SR_BUF_POOL+1/*same as packet dispatcher*/),.width(1)) sr_clear_srb + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.changed(srb_clear)); + // Output control lines wire [7:0] clock_outs, serdes_outs, adc_outs; assign {clock_ready, clk_en[1:0], clk_sel[1:0]} = clock_outs[4:0]; |