summaryrefslogtreecommitdiffstats
path: root/usrp2/top/N2x0/u2plus.v
diff options
context:
space:
mode:
Diffstat (limited to 'usrp2/top/N2x0/u2plus.v')
-rw-r--r--usrp2/top/N2x0/u2plus.v454
1 files changed, 454 insertions, 0 deletions
diff --git a/usrp2/top/N2x0/u2plus.v b/usrp2/top/N2x0/u2plus.v
new file mode 100644
index 000000000..7bf467fde
--- /dev/null
+++ b/usrp2/top/N2x0/u2plus.v
@@ -0,0 +1,454 @@
+`timescale 1ns / 1ps
+//`define LVDS 1
+//`define DCM_FOR_RAMCLK
+//////////////////////////////////////////////////////////////////////////////////
+
+module u2plus
+ (
+ input CLK_FPGA_P, input CLK_FPGA_N, // Diff
+
+ // ADC
+ input ADC_clkout_p, input ADC_clkout_n,
+ input ADCA_12_p, input ADCA_12_n,
+ input ADCA_10_p, input ADCA_10_n,
+ input ADCA_8_p, input ADCA_8_n,
+ input ADCA_6_p, input ADCA_6_n,
+ input ADCA_4_p, input ADCA_4_n,
+ input ADCA_2_p, input ADCA_2_n,
+ input ADCA_0_p, input ADCA_0_n,
+ input ADCB_12_p, input ADCB_12_n,
+ input ADCB_10_p, input ADCB_10_n,
+ input ADCB_8_p, input ADCB_8_n,
+ input ADCB_6_p, input ADCB_6_n,
+ input ADCB_4_p, input ADCB_4_n,
+ input ADCB_2_p, input ADCB_2_n,
+ input ADCB_0_p, input ADCB_0_n,
+
+ // DAC
+ output reg [15:0] DACA,
+ output reg [15:0] DACB,
+ input DAC_LOCK, // unused for now
+
+ // DB IO Pins
+ inout [15:0] io_tx,
+ inout [15:0] io_rx,
+
+ // Misc, debug
+ output [5:1] leds, // LED4 is shared w/INIT_B
+ input FPGA_RESET,
+ output [1:0] debug_clk,
+ output [31:0] debug,
+ output [3:1] TXD, input [3:1] RXD, // UARTs
+ //input [3:0] dipsw, // Forgot DIP Switches...
+
+ // Clock Gen Control
+ output [1:0] clk_en,
+ output [1:0] clk_sel,
+ input CLK_FUNC, // FIXME is an input to control the 9510
+ input clk_status,
+
+ inout SCL, inout SDA, // I2C
+
+ // PPS
+ input PPS_IN, input PPS2_IN,
+
+ // SPI
+ output SEN_CLK, output SCLK_CLK, output MOSI_CLK, input MISO_CLK,
+ output SEN_DAC, output SCLK_DAC, output MOSI_DAC, input MISO_DAC,
+ output SEN_ADC, output SCLK_ADC, output MOSI_ADC,
+ output SEN_TX_DB, output SCLK_TX_DB, output MOSI_TX_DB, input MISO_TX_DB,
+ output SEN_TX_DAC, output SCLK_TX_DAC, output MOSI_TX_DAC,
+ output SEN_TX_ADC, output SCLK_TX_ADC, output MOSI_TX_ADC, input MISO_TX_ADC,
+ output SEN_RX_DB, output SCLK_RX_DB, output MOSI_RX_DB, input MISO_RX_DB,
+ output SEN_RX_DAC, output SCLK_RX_DAC, output MOSI_RX_DAC,
+ output SEN_RX_ADC, output SCLK_RX_ADC, output MOSI_RX_ADC, input MISO_RX_ADC,
+
+ // GigE PHY
+ input CLK_TO_MAC,
+
+ output reg [7:0] GMII_TXD,
+ output reg GMII_TX_EN,
+ output reg GMII_TX_ER,
+ output GMII_GTX_CLK,
+ input GMII_TX_CLK, // 100mbps clk
+
+ input GMII_RX_CLK,
+ input [7:0] GMII_RXD,
+ input GMII_RX_DV,
+ input GMII_RX_ER,
+ input GMII_COL,
+ input GMII_CRS,
+
+ input PHY_INTn, // open drain
+ inout MDIO,
+ output MDC,
+ output PHY_RESETn,
+ output ETH_LED,
+
+// input POR,
+
+ // Expansion
+ input exp_time_in_p, input exp_time_in_n, // Diff
+ output exp_time_out_p, output exp_time_out_n, // Diff
+ input exp_user_in_p, input exp_user_in_n, // Diff
+ output exp_user_out_p, output exp_user_out_n, // Diff
+
+ // SERDES
+ output ser_enable,
+ output ser_prbsen,
+ output ser_loopen,
+ output ser_rx_en,
+
+ output ser_tx_clk,
+ output reg [15:0] ser_t,
+ output reg ser_tklsb,
+ output reg ser_tkmsb,
+
+ input ser_rx_clk,
+ input [15:0] ser_r,
+ input ser_rklsb,
+ input ser_rkmsb,
+
+ // SRAM
+ inout [35:0] RAM_D,
+ output [20:0] RAM_A,
+ output [3:0] RAM_BWn,
+ output RAM_ZZ,
+ output RAM_LDn,
+ output RAM_OEn,
+ output RAM_WEn,
+ output RAM_CENn,
+ output RAM_CLK,
+
+ // SPI Flash
+ output flash_cs,
+ output flash_clk,
+ output flash_mosi,
+ input flash_miso
+ );
+
+ wire CLK_TO_MAC_int, CLK_TO_MAC_int2;
+ IBUFG phyclk (.O(CLK_TO_MAC_int), .I(CLK_TO_MAC));
+ BUFG phyclk2 (.O(CLK_TO_MAC_int2), .I(CLK_TO_MAC_int));
+
+ // FPGA-specific pins connections
+ wire clk_fpga, dsp_clk, clk_div, dcm_out, wb_clk, clock_ready;
+
+ IBUFGDS clk_fpga_pin (.O(clk_fpga),.I(CLK_FPGA_P),.IB(CLK_FPGA_N));
+ defparam clk_fpga_pin.IOSTANDARD = "LVPECL_25";
+
+ wire exp_time_in;
+ IBUFDS exp_time_in_pin (.O(exp_time_in),.I(exp_time_in_p),.IB(exp_time_in_n));
+ defparam exp_time_in_pin.IOSTANDARD = "LVDS_25";
+
+ wire exp_time_out;
+ OBUFDS exp_time_out_pin (.O(exp_time_out_p),.OB(exp_time_out_n),.I(exp_time_out));
+ defparam exp_time_out_pin.IOSTANDARD = "LVDS_25";
+
+ wire exp_user_in;
+ IBUFDS exp_user_in_pin (.O(exp_user_in),.I(exp_user_in_p),.IB(exp_user_in_n));
+ defparam exp_user_in_pin.IOSTANDARD = "LVDS_25";
+
+ wire exp_user_out;
+ OBUFDS exp_user_out_pin (.O(exp_user_out_p),.OB(exp_user_out_n),.I(exp_user_out));
+ defparam exp_user_out_pin.IOSTANDARD = "LVDS_25";
+
+ reg [5:0] clock_ready_d;
+ always @(posedge clk_fpga)
+ clock_ready_d[5:0] <= {clock_ready_d[4:0],clock_ready};
+ wire dcm_rst = ~&clock_ready_d & |clock_ready_d;
+
+ // ADC A is inverted on the schematic to facilitate a clean layout
+ // We account for that here by inverting it
+`ifdef LVDS
+ wire [13:0] adc_a, adc_a_inv, adc_b;
+ capture_ddrlvds #(.WIDTH(14)) capture_ddrlvds
+ (.clk(dsp_clk), .ssclk_p(ADC_clkout_p), .ssclk_n(ADC_clkout_n),
+ .in_p({{ADCA_12_p, ADCA_10_p, ADCA_8_p, ADCA_6_p, ADCA_4_p, ADCA_2_p, ADCA_0_p},
+ {ADCB_12_p, ADCB_10_p, ADCB_8_p, ADCB_6_p, ADCB_4_p, ADCB_2_p, ADCB_0_p}}),
+ .in_n({{ADCA_12_n, ADCA_10_n, ADCA_8_n, ADCA_6_n, ADCA_4_n, ADCA_2_n, ADCA_0_n},
+ {ADCB_12_n, ADCB_10_n, ADCB_8_n, ADCB_6_n, ADCB_4_n, ADCB_2_n, ADCB_0_n}}),
+ .out({adc_a_inv,adc_b}));
+ assign adc_a = ~adc_a_inv;
+`else
+ reg [13:0] adc_a, adc_b;
+ always @(posedge dsp_clk)
+ begin
+ adc_a <= ~{ADCA_12_p,ADCA_12_n, ADCA_10_p,ADCA_10_n, ADCA_8_p,ADCA_8_n, ADCA_6_p,ADCA_6_n,
+ ADCA_4_p,ADCA_4_n, ADCA_2_p,ADCA_2_n, ADCA_0_p,ADCA_0_n };
+ adc_b <= {ADCB_12_p,ADCB_12_n, ADCB_10_p,ADCB_10_n, ADCB_8_p,ADCB_8_n, ADCB_6_p,ADCB_6_n,
+ ADCB_4_p,ADCB_4_n, ADCB_2_p,ADCB_2_n, ADCB_0_p,ADCB_0_n };
+ end
+`endif // !`ifdef LVDS
+
+ // Handle Clocks
+ DCM DCM_INST (.CLKFB(dsp_clk),
+ .CLKIN(clk_fpga),
+ .DSSEN(0),
+ .PSCLK(0),
+ .PSEN(0),
+ .PSINCDEC(0),
+ .RST(dcm_rst),
+ .CLKDV(clk_div),
+ .CLKFX(),
+ .CLKFX180(),
+ .CLK0(dcm_out),
+ .CLK2X(),
+ .CLK2X180(),
+ .CLK90(),
+ .CLK180(),
+ .CLK270(clk270_100),
+ .LOCKED(LOCKED_OUT),
+ .PSDONE(),
+ .STATUS());
+ defparam DCM_INST.CLK_FEEDBACK = "1X";
+ defparam DCM_INST.CLKDV_DIVIDE = 2.0;
+ defparam DCM_INST.CLKFX_DIVIDE = 1;
+ defparam DCM_INST.CLKFX_MULTIPLY = 4;
+ defparam DCM_INST.CLKIN_DIVIDE_BY_2 = "FALSE";
+ defparam DCM_INST.CLKIN_PERIOD = 10.000;
+ defparam DCM_INST.CLKOUT_PHASE_SHIFT = "NONE";
+ defparam DCM_INST.DESKEW_ADJUST = "SYSTEM_SYNCHRONOUS";
+ defparam DCM_INST.DFS_FREQUENCY_MODE = "LOW";
+ defparam DCM_INST.DLL_FREQUENCY_MODE = "LOW";
+ defparam DCM_INST.DUTY_CYCLE_CORRECTION = "TRUE";
+ defparam DCM_INST.FACTORY_JF = 16'h8080;
+ defparam DCM_INST.PHASE_SHIFT = 0;
+ defparam DCM_INST.STARTUP_WAIT = "FALSE";
+
+ BUFG dspclk_BUFG (.I(dcm_out), .O(dsp_clk));
+ BUFG wbclk_BUFG (.I(clk_div), .O(wb_clk));
+
+ // Create clock for external SRAM thats -90degree phase to DSPCLK (i.e) 2nS earlier at 100MHz.
+ BUFG clk270_100_buf_i1 (.I(clk270_100),
+ .O(clk270_100_buf));
+ OFDDRRSE RAM_CLK_i1 (.Q(RAM_CLK),
+ .C0(clk270_100_buf),
+ .C1(~clk270_100_buf),
+ .CE(1'b1),
+ .D0(1'b1),
+ .D1(1'b0),
+ .R(1'b0),
+ .S(1'b0));
+
+ // I2C -- Don't use external transistors for open drain, the FPGA implements this
+ IOBUF scl_pin(.O(scl_pad_i), .IO(SCL), .I(scl_pad_o), .T(scl_pad_oen_o));
+ IOBUF sda_pin(.O(sda_pad_i), .IO(SDA), .I(sda_pad_o), .T(sda_pad_oen_o));
+
+ // LEDs are active low outputs
+ wire [5:0] leds_int;
+ assign {ETH_LED,leds} = {6'b011111 ^ leds_int}; // drive low to turn on leds
+
+ // SPI
+ wire miso, mosi, sclk;
+
+ assign {SCLK_CLK,MOSI_CLK} = ~SEN_CLK ? {sclk,mosi} : 2'B0;
+ assign {SCLK_DAC,MOSI_DAC} = ~SEN_DAC ? {sclk,mosi} : 2'B0;
+ assign {SCLK_ADC,MOSI_ADC} = ~SEN_ADC ? {sclk,mosi} : 2'B0;
+ assign {SCLK_TX_DB,MOSI_TX_DB} = ~SEN_TX_DB ? {sclk,mosi} : 2'B0;
+ assign {SCLK_TX_DAC,MOSI_TX_DAC} = ~SEN_TX_DAC ? {sclk,mosi} : 2'B0;
+ assign {SCLK_TX_ADC,MOSI_TX_ADC} = ~SEN_TX_ADC ? {sclk,mosi} : 2'B0;
+ assign {SCLK_RX_DB,MOSI_RX_DB} = ~SEN_RX_DB ? {sclk,mosi} : 2'B0;
+ assign {SCLK_RX_DAC,MOSI_RX_DAC} = ~SEN_RX_DAC ? {sclk,mosi} : 2'B0;
+ assign {SCLK_RX_ADC,MOSI_RX_ADC} = ~SEN_RX_ADC ? {sclk,mosi} : 2'B0;
+
+ assign miso = (~SEN_CLK & MISO_CLK) | (~SEN_DAC & MISO_DAC) |
+ (~SEN_TX_DB & MISO_TX_DB) | (~SEN_TX_ADC & MISO_TX_ADC) |
+ (~SEN_RX_DB & MISO_RX_DB) | (~SEN_RX_ADC & MISO_RX_ADC);
+
+ wire GMII_TX_EN_unreg, GMII_TX_ER_unreg;
+ wire [7:0] GMII_TXD_unreg;
+ wire GMII_GTX_CLK_int;
+
+ always @(posedge GMII_GTX_CLK_int)
+ begin
+ GMII_TX_EN <= GMII_TX_EN_unreg;
+ GMII_TX_ER <= GMII_TX_ER_unreg;
+ GMII_TXD <= GMII_TXD_unreg;
+ end
+
+ OFDDRRSE OFDDRRSE_gmii_inst
+ (.Q(GMII_GTX_CLK), // Data output (connect directly to top-level port)
+ .C0(GMII_GTX_CLK_int), // 0 degree clock input
+ .C1(~GMII_GTX_CLK_int), // 180 degree clock input
+ .CE(1), // Clock enable input
+ .D0(0), // Posedge data input
+ .D1(1), // Negedge data input
+ .R(0), // Synchronous reset input
+ .S(0) // Synchronous preset input
+ );
+
+ wire ser_tklsb_unreg, ser_tkmsb_unreg;
+ wire [15:0] ser_t_unreg;
+ wire ser_tx_clk_int;
+
+ always @(posedge ser_tx_clk_int)
+ begin
+ ser_tklsb <= ser_tklsb_unreg;
+ ser_tkmsb <= ser_tkmsb_unreg;
+ ser_t <= ser_t_unreg;
+ end
+
+ assign ser_tx_clk = clk_fpga;
+
+ reg [15:0] ser_r_int;
+ reg ser_rklsb_int, ser_rkmsb_int;
+
+ always @(posedge ser_rx_clk)
+ begin
+ ser_r_int <= ser_r;
+ ser_rklsb_int <= ser_rklsb;
+ ser_rkmsb_int <= ser_rkmsb;
+ end
+
+ /*
+ OFDDRRSE OFDDRRSE_serdes_inst
+ (.Q(ser_tx_clk), // Data output (connect directly to top-level port)
+ .C0(ser_tx_clk_int), // 0 degree clock input
+ .C1(~ser_tx_clk_int), // 180 degree clock input
+ .CE(1), // Clock enable input
+ .D0(0), // Posedge data input
+ .D1(1), // Negedge data input
+ .R(0), // Synchronous reset input
+ .S(0) // Synchronous preset input
+ );
+ */
+
+
+ //
+ // Instantiate IO for Bidirectional bus to SRAM
+ //
+ wire [35:0] RAM_D_pi;
+ wire [35:0] RAM_D_po;
+ wire RAM_D_poe;
+
+ genvar i;
+
+ generate
+ for (i=0;i<36;i=i+1)
+ begin : gen_RAM_D_IO
+
+ IOBUF #(
+ .DRIVE(12),
+ .IOSTANDARD("LVCMOS25"),
+ .SLEW("FAST")
+ )
+ RAM_D_i (
+ .O(RAM_D_pi[i]),
+ .I(RAM_D_po[i]),
+ .IO(RAM_D[i]),
+ .T(RAM_D_poe)
+ );
+ end // block: gen_RAM_D_IO
+ endgenerate
+
+
+
+ wire [15:0] dac_a_int, dac_b_int;
+ // DAC A and B are swapped in schematic to facilitate clean layout
+ // DAC A is also inverted in schematic to facilitate clean layout
+ always @(negedge dsp_clk) DACA <= ~dac_b_int;
+ always @(negedge dsp_clk) DACB <= dac_a_int;
+
+ wire pps;
+ assign pps = PPS_IN ^ PPS2_IN;
+
+ u2plus_core u2p_c(.dsp_clk (dsp_clk),
+ .wb_clk (wb_clk),
+ .clock_ready (clock_ready),
+ .clk_to_mac (CLK_TO_MAC_int2),
+ .pps_in (pps),
+ .leds (leds_int),
+ .debug (debug[31:0]),
+ .debug_clk (debug_clk[1:0]),
+ .exp_time_in (exp_time_in),
+ .exp_time_out (exp_time_out),
+ .GMII_COL (GMII_COL),
+ .GMII_CRS (GMII_CRS),
+ .GMII_TXD (GMII_TXD_unreg[7:0]),
+ .GMII_TX_EN (GMII_TX_EN_unreg),
+ .GMII_TX_ER (GMII_TX_ER_unreg),
+ .GMII_GTX_CLK (GMII_GTX_CLK_int),
+ .GMII_TX_CLK (GMII_TX_CLK),
+ .GMII_RXD (GMII_RXD[7:0]),
+ .GMII_RX_CLK (GMII_RX_CLK),
+ .GMII_RX_DV (GMII_RX_DV),
+ .GMII_RX_ER (GMII_RX_ER),
+ .MDIO (MDIO),
+ .MDC (MDC),
+ .PHY_INTn (PHY_INTn),
+ .PHY_RESETn (PHY_RESETn),
+ .ser_enable (ser_enable),
+ .ser_prbsen (ser_prbsen),
+ .ser_loopen (ser_loopen),
+ .ser_rx_en (ser_rx_en),
+ .ser_tx_clk (ser_tx_clk_int),
+ .ser_t (ser_t_unreg[15:0]),
+ .ser_tklsb (ser_tklsb_unreg),
+ .ser_tkmsb (ser_tkmsb_unreg),
+ .ser_rx_clk (ser_rx_clk),
+ .ser_r (ser_r_int[15:0]),
+ .ser_rklsb (ser_rklsb_int),
+ .ser_rkmsb (ser_rkmsb_int),
+ .adc_a (adc_a[13:0]),
+ .adc_ovf_a (1'b0),
+ .adc_on_a (),
+ .adc_oe_a (),
+ .adc_b (adc_b[13:0]),
+ .adc_ovf_b (1'b0),
+ .adc_on_b (),
+ .adc_oe_b (),
+ .dac_a (dac_a_int[15:0]),
+ .dac_b (dac_b_int[15:0]),
+ .scl_pad_i (scl_pad_i),
+ .scl_pad_o (scl_pad_o),
+ .scl_pad_oen_o (scl_pad_oen_o),
+ .sda_pad_i (sda_pad_i),
+ .sda_pad_o (sda_pad_o),
+ .sda_pad_oen_o (sda_pad_oen_o),
+ .clk_en (clk_en[1:0]),
+ .clk_sel (clk_sel[1:0]),
+ .clk_func (clk_func),
+ .clk_status (clk_status),
+ .sclk (sclk),
+ .mosi (mosi),
+ .miso (miso),
+ .sen_clk (SEN_CLK),
+ .sen_dac (SEN_DAC),
+ .sen_adc (SEN_ADC),
+ .sen_tx_db (SEN_TX_DB),
+ .sen_tx_adc (SEN_TX_ADC),
+ .sen_tx_dac (SEN_TX_DAC),
+ .sen_rx_db (SEN_RX_DB),
+ .sen_rx_adc (SEN_RX_ADC),
+ .sen_rx_dac (SEN_RX_DAC),
+ .io_tx (io_tx[15:0]),
+ .io_rx (io_rx[15:0]),
+ .RAM_D_po (RAM_D_po),
+ .RAM_D_pi (RAM_D_pi),
+ .RAM_D_poe (RAM_D_poe),
+ .RAM_A (RAM_A),
+ .RAM_CE1n (RAM_CE1n),
+ .RAM_CENn (RAM_CENn),
+ .RAM_WEn (RAM_WEn),
+ .RAM_OEn (RAM_OEn),
+ .RAM_LDn (RAM_LDn),
+ .uart_tx_o (TXD[3:1]),
+ .uart_rx_i ({1'b1,RXD[3:1]}),
+ .uart_baud_o (),
+ .sim_mode (1'b0),
+ .clock_divider (2),
+ .button (FPGA_RESET),
+ .spiflash_cs (flash_cs),
+ .spiflash_clk (flash_clk),
+ .spiflash_miso (flash_miso),
+ .spiflash_mosi (flash_mosi)
+ );
+
+ // Drive low so that RAM does not sleep.
+ assign RAM_ZZ = 0;
+ // Byte Writes are qualified by the global write enable
+ // Always do 36bit operations to extram.
+ assign RAM_BWn = 4'b0000;
+
+endmodule // u2plus
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 06:59:46 +0000