diff options
Diffstat (limited to 'usrp2/top/B100')
-rw-r--r-- | usrp2/top/B100/B100.ucf | 200 | ||||
-rw-r--r-- | usrp2/top/B100/B100.v | 172 | ||||
-rw-r--r-- | usrp2/top/B100/Makefile.B100 | 98 | ||||
-rw-r--r-- | usrp2/top/B100/Makefile.u1plus (renamed from usrp2/top/B100/Makefile) | 4 | ||||
-rw-r--r-- | usrp2/top/B100/u1plus.ucf | 4 |
5 files changed, 474 insertions, 4 deletions
diff --git a/usrp2/top/B100/B100.ucf b/usrp2/top/B100/B100.ucf new file mode 100644 index 000000000..69fd49971 --- /dev/null +++ b/usrp2/top/B100/B100.ucf @@ -0,0 +1,200 @@ +## Main Clock +NET "CLK_FPGA_P" LOC = "R7" ; +NET "CLK_FPGA_N" LOC = "T7" ; + +## I2C +NET "SDA_FPGA" LOC = "T13" ; +NET "SCL_FPGA" LOC = "R13" ; + +## CGEN +NET "cgen_st_ld" LOC = "M13" ; +NET "cgen_st_refmon" LOC = "J14" ; +NET "cgen_st_status" LOC = "P6" ; +NET "cgen_ref_sel" LOC = "T2" ; +NET "cgen_sync_b" LOC = "H15" ; + +## FPGA Config +#NET "fpga_cfg_din" LOC = "T14" ; +#NET "fpga_cfg_cclk" LOC = "R14" ; +#NET "fpga_cfg_init_b" LOC = "T12" ; + +## MISC +#NET "mystery_bus<1>" LOC = "C4" ; +#NET "mystery_bus<0>" LOC = "E7" ; +NET "reset_n" LOC = "D5" ; +NET "PPS_IN" LOC = "M14" ; +NET "reset_codec" LOC = "B14" ; + +## GPIF +NET "GPIF_D<15>" LOC = "P7" ; +NET "GPIF_D<14>" LOC = "N8" ; +NET "GPIF_D<13>" LOC = "T5" ; +NET "GPIF_D<12>" LOC = "T6" ; +NET "GPIF_D<11>" LOC = "N6" ; +NET "GPIF_D<10>" LOC = "P5" ; +NET "GPIF_D<9>" LOC = "R3" ; +NET "GPIF_D<8>" LOC = "T3" ; +NET "GPIF_D<7>" LOC = "N12" ; +NET "GPIF_D<6>" LOC = "P13" ; +NET "GPIF_D<5>" LOC = "P11" ; +NET "GPIF_D<4>" LOC = "R9" ; +NET "GPIF_D<3>" LOC = "T9" ; +NET "GPIF_D<2>" LOC = "N9" ; +NET "GPIF_D<1>" LOC = "P9" ; +NET "GPIF_D<0>" LOC = "P8" ; + +NET "GPIF_CTL<3>" LOC = "N5" ; +NET "GPIF_CTL<2>" LOC = "M11" ; +NET "GPIF_CTL<1>" LOC = "M9" ; +NET "GPIF_CTL<0>" LOC = "M7" ; + +NET "GPIF_RDY<3>" LOC = "N11" ; +NET "GPIF_RDY<2>" LOC = "T10" ; +NET "GPIF_RDY<1>" LOC = "T4" ; +NET "GPIF_RDY<0>" LOC = "R5" ; + +NET "GPIF_CS" LOC = "P12" ; +NET "GPIF_SLOE" LOC = "R11" ; +NET "GPIF_PKTEND" LOC = "P10" ; +NET "GPIF_ADR<0>" LOC = "T11" ; +NET "GPIF_ADR<1>" LOC = "H16" ; + +NET "IFCLK" LOC = "T8" ; + +## LEDs +NET "debug_led<2>" LOC = "R2" ; +NET "debug_led<1>" LOC = "N4" ; +NET "debug_led<0>" LOC = "P4" ; + +## Debug bus +NET "debug_clk<0>" LOC = "K15" ; +NET "debug_clk<1>" LOC = "K14" ; +NET "debug<0>" LOC = "K16" ; +NET "debug<1>" LOC = "J16" ; +NET "debug<2>" LOC = "C16" ; +NET "debug<3>" LOC = "C15" ; +NET "debug<4>" LOC = "E13" ; +NET "debug<5>" LOC = "D14" ; +NET "debug<6>" LOC = "D16" ; +NET "debug<7>" LOC = "D15" ; +NET "debug<8>" LOC = "E14" ; +NET "debug<9>" LOC = "F13" ; +NET "debug<10>" LOC = "G13" ; +NET "debug<11>" LOC = "F14" ; +NET "debug<12>" LOC = "E16" ; +NET "debug<13>" LOC = "F15" ; +NET "debug<14>" LOC = "H13" ; +NET "debug<15>" LOC = "G14" ; +NET "debug<16>" LOC = "G16" ; +NET "debug<17>" LOC = "F16" ; +NET "debug<18>" LOC = "J12" ; +NET "debug<19>" LOC = "J13" ; +NET "debug<20>" LOC = "L14" ; +NET "debug<21>" LOC = "L16" ; +NET "debug<22>" LOC = "M15" ; +NET "debug<23>" LOC = "M16" ; +NET "debug<24>" LOC = "L13" ; +NET "debug<25>" LOC = "K13" ; +NET "debug<26>" LOC = "P16" ; +NET "debug<27>" LOC = "N16" ; +NET "debug<28>" LOC = "R15" ; +NET "debug<29>" LOC = "P15" ; +NET "debug<30>" LOC = "N13" ; +NET "debug<31>" LOC = "N14" ; + +## ADC +NET "adc<11>" LOC = "B15" ; +NET "adc<10>" LOC = "A8" ; +NET "adc<9>" LOC = "B8" ; +NET "adc<8>" LOC = "C8" ; +NET "adc<7>" LOC = "D8" ; +NET "adc<6>" LOC = "C9" ; +NET "adc<5>" LOC = "A9" ; +NET "adc<4>" LOC = "C10" ; +NET "adc<3>" LOC = "D9" ; +NET "adc<2>" LOC = "A3" ; +NET "adc<1>" LOC = "B3" ; +NET "adc<0>" LOC = "A4" ; +NET "RXSYNC" LOC = "D10" ; + +## DAC +NET "TXBLANK" LOC = "K1" ; +NET "TXSYNC" LOC = "J2" ; +NET "dac<0>" LOC = "J1" ; +NET "dac<1>" LOC = "H3" ; +NET "dac<2>" LOC = "J3" ; +NET "dac<3>" LOC = "G2" ; +NET "dac<4>" LOC = "H1" ; +NET "dac<5>" LOC = "N3" ; +NET "dac<6>" LOC = "M4" ; +NET "dac<7>" LOC = "R1" ; +NET "dac<8>" LOC = "P2" ; +NET "dac<9>" LOC = "P1" ; +NET "dac<10>" LOC = "M1" ; +NET "dac<11>" LOC = "N1" ; +NET "dac<12>" LOC = "M3" ; +NET "dac<13>" LOC = "L4" ; + +## TX DB +NET "io_tx<0>" LOC = "K4" ; +NET "io_tx<1>" LOC = "L3" ; +NET "io_tx<2>" LOC = "L2" ; +NET "io_tx<3>" LOC = "F1" ; +NET "io_tx<4>" LOC = "F3" ; +NET "io_tx<5>" LOC = "G3" ; +NET "io_tx<6>" LOC = "E3" ; +NET "io_tx<7>" LOC = "E2" ; +NET "io_tx<8>" LOC = "E4" ; +NET "io_tx<9>" LOC = "F4" ; +NET "io_tx<10>" LOC = "D1" ; +NET "io_tx<11>" LOC = "E1" ; +NET "io_tx<12>" LOC = "D4" ; +NET "io_tx<13>" LOC = "D3" ; +NET "io_tx<14>" LOC = "C2" ; +NET "io_tx<15>" LOC = "C1" ; + +## RX DB +NET "io_rx<0>" LOC = "D7" ; +NET "io_rx<1>" LOC = "C6" ; +NET "io_rx<2>" LOC = "A6" ; +NET "io_rx<3>" LOC = "B6" ; +NET "io_rx<4>" LOC = "E9" ; +NET "io_rx<5>" LOC = "A7" ; +NET "io_rx<6>" LOC = "C7" ; +NET "io_rx<7>" LOC = "B10" ; +NET "io_rx<8>" LOC = "A10" ; +NET "io_rx<9>" LOC = "C11" ; +NET "io_rx<10>" LOC = "A11" ; +NET "io_rx<11>" LOC = "D11" ; +NET "io_rx<12>" LOC = "B12" ; +NET "io_rx<13>" LOC = "A12" ; +NET "io_rx<14>" LOC = "A14" ; +NET "io_rx<15>" LOC = "A13" ; + +## SPI +#NET "SEN_AUX" LOC = "C12" ; +#NET "SCLK_AUX" LOC = "D12" ; +#NET "MISO_AUX" LOC = "J5" ; +NET "SCLK_CODEC" LOC = "K3" ; +NET "SEN_CODEC" LOC = "D13" ; +NET "MOSI_CODEC" LOC = "C13" ; +NET "MISO_CODEC" LOC = "G4" ; + +NET "MISO_RX_DB" LOC = "E6" ; +NET "SEN_RX_DB" LOC = "B4" ; +NET "MOSI_RX_DB" LOC = "A5" ; +NET "SCLK_RX_DB" LOC = "C5" ; + +NET "MISO_TX_DB" LOC = "J4" ; +NET "SEN_TX_DB" LOC = "N2" ; +NET "MOSI_TX_DB" LOC = "L1" ; +NET "SCLK_TX_DB" LOC = "G1" ; + +## Dedicated pins +#NET "TMS" LOC = "B2" ; +#NET "TDO" LOC = "B16" ; +#NET "TDI" LOC = "B1" ; +#NET "TCK" LOC = "A15" ; + +#NET "fpga_cfg_prog_b" LOC = "A2" ; +#NET "fpga_cfg_done" LOC = "T15" ; diff --git a/usrp2/top/B100/B100.v b/usrp2/top/B100/B100.v new file mode 100644 index 000000000..fa3ea70eb --- /dev/null +++ b/usrp2/top/B100/B100.v @@ -0,0 +1,172 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +`timescale 1ns / 1ps +////////////////////////////////////////////////////////////////////////////////// + +module B100 + (input CLK_FPGA_P, input CLK_FPGA_N, // Diff + output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk, + + // GPIF + inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output [3:0] GPIF_RDY, + input [1:0] GPIF_ADR, input GPIF_CS, input GPIF_SLOE, input GPIF_PKTEND, + input IFCLK, + + inout SDA_FPGA, inout SCL_FPGA, // I2C + + output SCLK_TX_DB, output SEN_TX_DB, output MOSI_TX_DB, input MISO_TX_DB, // DB TX SPI + output SCLK_RX_DB, output SEN_RX_DB, output MOSI_RX_DB, input MISO_RX_DB, // DB TX SPI + output SCLK_CODEC, output SEN_CODEC, output MOSI_CODEC, input MISO_CODEC, // AD9862 main SPI + + input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel, + + inout [15:0] io_tx, inout [15:0] io_rx, + + output [13:0] dac, output TXSYNC, output TXBLANK, + input [11:0] adc, input RXSYNC, + + input PPS_IN, + input reset_n, output reset_codec + ); + + assign reset_codec = 1; // Believed to be active low + + // ///////////////////////////////////////////////////////////////////////// + // Clocking + wire clk_fpga, clk_fpga_in, reset; + + IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) + clk_fpga_pin (.O(clk_fpga_in),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); + + BUFG clk_fpga_BUFG (.I(clk_fpga_in), .O(clk_fpga)); + + reset_sync reset_sync(.clk(clk_fpga), .reset_in(~reset_n), .reset_out(reset)); + + // ///////////////////////////////////////////////////////////////////////// + // SPI + wire mosi, sclk, miso; + assign { SCLK_TX_DB, MOSI_TX_DB } = ~SEN_TX_DB ? {sclk,mosi} : 2'b0; + assign { SCLK_RX_DB, MOSI_RX_DB } = ~SEN_RX_DB ? {sclk,mosi} : 2'b0; + assign { SCLK_CODEC, MOSI_CODEC } = ~SEN_CODEC ? {sclk,mosi} : 2'b0; + assign miso = (~SEN_TX_DB & MISO_TX_DB) | (~SEN_RX_DB & MISO_RX_DB) | + (~SEN_CODEC & MISO_CODEC); + + // ///////////////////////////////////////////////////////////////////////// + // TX DAC -- handle the interleaved data bus to DAC, with clock doubling DLL + + assign TXBLANK = 0; + wire [13:0] tx_i, tx_q; + + genvar i; + generate + for(i=0;i<14;i=i+1) + begin : gen_dacout + ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + ODDR2_inst (.Q(dac[i]), // 1-bit DDR output data + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D0(tx_i[i]), // 1-bit data input (associated with C0) + .D1(tx_q[i]), // 1-bit data input (associated with C1) + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + end // block: gen_dacout + endgenerate + ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + ODDR2_txsnc (.Q(TXSYNC), // 1-bit DDR output data + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D0(1'b0), // 1-bit data input (associated with C0) + .D1(1'b1), // 1-bit data input (associated with C1) + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + + // ///////////////////////////////////////////////////////////////////////// + // RX ADC -- handles deinterleaving + + reg [11:0] rx_i, rx_q; + wire [11:0] rx_a, rx_b; + + genvar j; + generate + for(j=0;j<12;j=j+1) + begin : gen_adcin + IDDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT_Q0(1'b0), // Sets initial state of the Q0 output to 1’b0 or 1’b1 + .INIT_Q1(1'b0), // Sets initial state of the Q1 output to 1’b0 or 1’b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + IDDR2_inst (.Q0(rx_a[j]), // 1-bit output captured with C0 clock + .Q1(rx_b[j]), // 1-bit output captured with C1 clock + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D(adc[j]), // 1-bit DDR data input + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + end // block: gen_adcin + endgenerate + + IDDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT_Q0(1'b0), // Sets initial state of the Q0 output to 1’b0 or 1’b1 + .INIT_Q1(1'b0), // Sets initial state of the Q1 output to 1’b0 or 1’b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + IDDR2_sync (.Q0(rxsync_0), // 1-bit output captured with C0 clock + .Q1(rxsync_1), // 1-bit output captured with C1 clock + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D(RXSYNC), // 1-bit DDR data input + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + + always @(posedge clk_fpga) + if(rxsync_0) + begin + rx_i <= rx_b; + rx_q <= rx_a; + end + else + begin + rx_i <= rx_a; + rx_q <= rx_b; + end + + // ///////////////////////////////////////////////////////////////////////// + // Main U1E Core + u1plus_core u1p_c(.clk_fpga(clk_fpga), .rst_fpga(reset), + .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk), + .debug_txd(), .debug_rxd(1'b1), + .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_rdy(GPIF_RDY), + //.gpif_misc({GPIF_ADR[1:0],GPIF_CS,GPIF_SLOE,GPIF_PKTEND}), + .gpif_clk(IFCLK), + + .db_sda(SDA_FPGA), .db_scl(SCL_FPGA), + .sclk(sclk), .sen({SEN_CODEC,SEN_TX_DB,SEN_RX_DB}), .mosi(mosi), .miso(miso), + .cgen_st_status(cgen_st_status), .cgen_st_ld(cgen_st_ld),.cgen_st_refmon(cgen_st_refmon), + .cgen_sync_b(cgen_sync_b), .cgen_ref_sel(cgen_ref_sel), + .io_tx(io_tx), .io_rx(io_rx), + .tx_i(tx_i), .tx_q(tx_q), + .rx_i(rx_i), .rx_q(rx_q), + .pps_in(PPS_IN) ); + +endmodule // B100 diff --git a/usrp2/top/B100/Makefile.B100 b/usrp2/top/B100/Makefile.B100 new file mode 100644 index 000000000..90dd25942 --- /dev/null +++ b/usrp2/top/B100/Makefile.B100 @@ -0,0 +1,98 @@ +# +# Copyright 2008 Ettus Research LLC +# + +################################################## +# Project Setup +################################################## +TOP_MODULE := B100 +BUILD_DIR := build-B100/ +export PROJ_FILE := $(BUILD_DIR)$(TOP_MODULE).ise + +include ../Makefile.common +include ../../fifo/Makefile.srcs +include ../../control_lib/Makefile.srcs +include ../../sdr_lib/Makefile.srcs +include ../../serdes/Makefile.srcs +include ../../simple_gemac/Makefile.srcs +include ../../timing/Makefile.srcs +include ../../opencores/Makefile.srcs +include ../../vrt/Makefile.srcs +include ../../udp/Makefile.srcs +include ../../coregen/Makefile.srcs +include ../../gpif/Makefile.srcs + +################################################## +# Project Properties +################################################## +export PROJECT_PROPERTIES := \ +family "Spartan3A" \ +device XC3S1400A \ +package ft256 \ +speed -4 \ +top_level_module_type "HDL" \ +synthesis_tool "XST (VHDL/Verilog)" \ +simulator "ISE Simulator (VHDL/Verilog)" \ +"Preferred Language" "Verilog" \ +"Enable Message Filtering" FALSE \ +"Display Incremental Messages" FALSE + +################################################## +# Sources +################################################## +TOP_SRCS = \ +B100.v \ +u1plus_core.v \ +B100.ucf \ +timing.ucf + +SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ +$(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ +$(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ +$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ +$(GPIF_SRCS) + +################################################## +# Process Properties +################################################## +SYNTHESIZE_PROPERTIES = \ +"Number of Clock Buffers" 8 \ +"Pack I/O Registers into IOBs" Yes \ +"Optimization Effort" High \ +"Optimize Instantiated Primitives" TRUE \ +"Register Balancing" Yes \ +"Use Clock Enable" Auto \ +"Use Synchronous Reset" Auto \ +"Use Synchronous Set" Auto + +TRANSLATE_PROPERTIES = \ +"Macro Search Path" "$(shell pwd)/../../coregen/" + +MAP_PROPERTIES = \ +"Generate Detailed MAP Report" TRUE \ +"Allow Logic Optimization Across Hierarchy" TRUE \ +"Map to Input Functions" 4 \ +"Optimization Strategy (Cover Mode)" Speed \ +"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \ +"Perform Timing-Driven Packing and Placement" TRUE \ +"Map Effort Level" High \ +"Extra Effort" Normal \ +"Combinatorial Logic Optimization" TRUE \ +"Register Duplication" TRUE + +PLACE_ROUTE_PROPERTIES = \ +"Place & Route Effort Level (Overall)" High + +STATIC_TIMING_PROPERTIES = \ +"Number of Paths in Error/Verbose Report" 10 \ +"Report Type" "Error Report" + +GEN_PROG_FILE_PROPERTIES = \ +"Configuration Rate" 6 \ +"Create Binary Configuration File" TRUE \ +"Done (Output Events)" 5 \ +"Enable Bitstream Compression" TRUE \ +"Enable Outputs (Output Events)" 6 \ +"Unused IOB Pins" "Pull Up" + +SIM_MODEL_PROPERTIES = "" diff --git a/usrp2/top/B100/Makefile b/usrp2/top/B100/Makefile.u1plus index 7ab56f9bd..e08a11126 100644 --- a/usrp2/top/B100/Makefile +++ b/usrp2/top/B100/Makefile.u1plus @@ -5,8 +5,8 @@ ################################################## # Project Setup ################################################## -BUILD_DIR := build/ -export TOP_MODULE := u1plus +TOP_MODULE := u1plus +BUILD_DIR := build-u1plus/ export PROJ_FILE := $(BUILD_DIR)$(TOP_MODULE).ise include ../Makefile.common diff --git a/usrp2/top/B100/u1plus.ucf b/usrp2/top/B100/u1plus.ucf index cd89878e3..3ecc4daf2 100644 --- a/usrp2/top/B100/u1plus.ucf +++ b/usrp2/top/B100/u1plus.ucf @@ -199,5 +199,5 @@ NET "SCLK_TX_DB" LOC = "G1" ; #NET "TDI" LOC = "B1" ; #NET "TCK" LOC = "A15" ; -##NET "fpga_cfg_prog_b" LOC = "A2" ; -##NET "fpga_cfg_done" LOC = "T15" ; +#NET "fpga_cfg_prog_b" LOC = "A2" ; +#NET "fpga_cfg_done" LOC = "T15" ; |