diff options
Diffstat (limited to 'usrp2/top/B100')
-rw-r--r-- | usrp2/top/B100/u1plus_core.v | 144 |
1 files changed, 100 insertions, 44 deletions
diff --git a/usrp2/top/B100/u1plus_core.v b/usrp2/top/B100/u1plus_core.v index 8a02f0fb8..3c861fe08 100644 --- a/usrp2/top/B100/u1plus_core.v +++ b/usrp2/top/B100/u1plus_core.v @@ -30,7 +30,6 @@ module u1plus_core output sclk, output [15:0] sen, output mosi, input miso, input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel, - output tx_underrun, output rx_overrun, inout [15:0] io_tx, inout [15:0] io_rx, output [13:0] tx_i, output [13:0] tx_q, input [11:0] rx_i, input [11:0] rx_q, @@ -41,24 +40,31 @@ module u1plus_core localparam RXFIFOSIZE = 11; // 64 total regs in address space - localparam SR_RX_CTRL = 0; // 9 regs (+0 to +8) - localparam SR_RX_DSP = 16; // 7 regs (+0 to +6) - localparam SR_TX_CTRL = 24; // 6 regs (+0 to +5) - localparam SR_TX_DSP = 32; // 5 regs (+0 to +4) - localparam SR_TIME64 = 40; // 6 regs (+0 to +5) - localparam SR_CLEAR_RX_FIFO = 48; // 1 reg - localparam SR_CLEAR_TX_FIFO = 49; // 1 reg - localparam SR_GLOBAL_RESET = 50; // 1 reg - localparam SR_REG_TEST32 = 52; // 1 reg - - wire [7:0] COMPAT_NUM = 8'd3; + localparam SR_RX_CTRL0 = 0; // 9 regs (+0 to +8) + localparam SR_RX_DSP0 = 10; // 4 regs (+0 to +3) + localparam SR_RX_CTRL1 = 16; // 9 regs (+0 to +8) + localparam SR_RX_DSP1 = 26; // 4 regs (+0 to +3) + localparam SR_TX_CTRL = 32; // 4 regs (+0 to +3) + localparam SR_TX_DSP = 38; // 3 regs (+0 to +2) + + localparam SR_TIME64 = 42; // 6 regs (+0 to +5) + localparam SR_RX_FRONT = 48; // 5 regs (+0 to +4) + localparam SR_TX_FRONT = 54; // 5 regs (+0 to +4) + + localparam SR_REG_TEST32 = 60; // 1 reg + localparam SR_CLEAR_RX_FIFO = 61; // 1 reg + localparam SR_CLEAR_TX_FIFO = 62; // 1 reg + localparam SR_GLOBAL_RESET = 63; // 1 reg + + wire [7:0] COMPAT_NUM = 8'd5; wire wb_clk = clk_fpga; wire wb_rst, global_reset; wire pps_int; wire [63:0] vita_time, vita_time_pps; - reg [15:0] reg_leds, reg_cgen_ctrl, reg_test, xfer_rate; + reg [15:0] reg_leds, reg_cgen_ctrl, reg_test; + wire [15:0] xfer_rate = 0; wire [7:0] test_rate; wire [3:0] test_ctrl; @@ -72,11 +78,11 @@ module u1plus_core wire [31:0] debug_vt; wire gpif_rst; - wire rx_overrun_dsp, rx_overrun_gpmc, tx_underrun_dsp, tx_underrun_gpmc; reg [7:0] frames_per_packet; - assign rx_overrun = rx_overrun_gpmc | rx_overrun_dsp; - assign tx_underrun = tx_underrun_gpmc | tx_underrun_dsp; + wire rx_overrun_dsp0, rx_overrun_dsp1, rx_overrun_gpif, tx_underrun_dsp, tx_underrun_gpif; + wire rx_overrun = rx_overrun_gpif | rx_overrun_dsp0 | rx_overrun_dsp1; + wire tx_underrun = tx_underrun_gpif | tx_underrun_dsp; setting_reg #(.my_addr(SR_GLOBAL_RESET), .width(1)) sr_reset (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), @@ -97,13 +103,12 @@ module u1plus_core wire [sw-1:0] m0_sel; wire m0_cyc, m0_stb, m0_we, m0_ack, m0_err, m0_rty; - wire [31:0] debug_gpmc; + wire [31:0] debug_gpif; wire [35:0] tx_data, rx_data, tx_err_data; wire tx_src_rdy, tx_dst_rdy, rx_src_rdy, rx_dst_rdy, tx_err_src_rdy, tx_err_dst_rdy; - wire bus_error; wire clear_tx, clear_rx; setting_reg #(.my_addr(SR_CLEAR_RX_FIFO), .width(1)) sr_clear_rx @@ -128,36 +133,83 @@ module u1plus_core .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy), .tx_err_data_i(tx_err_data), .tx_err_src_rdy_i(tx_err_src_rdy), .tx_err_dst_rdy_o(tx_err_dst_rdy), - .tx_underrun(tx_underrun_gpmc), .rx_overrun(rx_overrun_gpmc), + .tx_underrun(tx_underrun_gpif), .rx_overrun(rx_overrun_gpif), .frames_per_packet(frames_per_packet), .test_len(test_len), .test_rate(test_rate), .test_ctrl(test_ctrl), .debug0(debug0), .debug1(debug1)); // ///////////////////////////////////////////////////////////////////////// - // DSP RX - wire [31:0] sample_rx; - wire strobe_rx, run_rx; - wire [31:0] debug_rx_dsp, vr_debug; + // RX ADC Frontend, does IQ Balance, DC Offset, muxing + + wire [23:0] adc_i, adc_q; // 24 bits is total overkill here, but it matches u2/u2p + wire run_rx, run_rx0, run_rx1; + + rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend + (.clk(wb_clk),.rst(wb_rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .adc_a({rx_i,4'b00}),.adc_ovf_a(0), + .adc_b({rx_q,4'b00}),.adc_ovf_b(0), + .i_out(adc_i), .q_out(adc_q), .run(run_rx0 | run_rx1), .debug()); + + // ///////////////////////////////////////////////////////////////////////// + // DSP RX 0 + + wire [31:0] sample_rx0; + wire strobe_rx0; + wire [35:0] vita_rx_data0; + wire vita_rx_src_rdy0, vita_rx_dst_rdy0; - dsp_core_rx #(.BASE(SR_RX_DSP)) dsp_core_rx + dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0 (.clk(wb_clk),.rst(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_a({rx_i,2'b0}),.adc_ovf_a(0),.adc_b({rx_q,2'b0}),.adc_ovf_b(0), - .sample(sample_rx), .run(run_rx), .strobe(strobe_rx), - .debug(debug_rx_dsp) ); + .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0), + .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), + .debug() ); + + vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain0 + (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .vita_time(vita_time), .overrun(rx_overrun_dsp0), + .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), + .rx_data_o(vita_rx_data0), .rx_dst_rdy_i(vita_rx_dst_rdy0), .rx_src_rdy_o(vita_rx_src_rdy0), + .debug() ); - vita_rx_chain #(.BASE(SR_RX_CTRL), .UNIT(0), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain + // ///////////////////////////////////////////////////////////////////////// + // DSP RX 1 + + wire [31:0] sample_rx1; + wire strobe_rx1; + wire [35:0] vita_rx_data1; + wire vita_rx_src_rdy1, vita_rx_dst_rdy1; + + dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1 + (.clk(wb_clk),.rst(wb_rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0), + .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), + .debug() ); + + vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain1 (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .vita_time(vita_time), .overrun(rx_overrun_dsp), - .sample(sample_rx), .run(run_rx), .strobe(strobe_rx), - .rx_data_o(rx_data), .rx_dst_rdy_i(rx_dst_rdy), .rx_src_rdy_o(rx_src_rdy), - .debug(vr_debug) ); + .vita_time(vita_time), .overrun(rx_overrun_dsp1), + .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), + .rx_data_o(vita_rx_data1), .rx_dst_rdy_i(vita_rx_dst_rdy1), .rx_src_rdy_o(vita_rx_src_rdy1), + .debug() ); + + // ///////////////////////////////////////////////////////////////////////// + // RX Stream muxing + + fifo36_mux #(.prio(0)) mux_data_streams + (.clk(wb_clk), .reset(wb_rst), .clear(0), + .data0_i(vita_rx_data0), .src0_rdy_i(vita_rx_src_rdy0), .dst0_rdy_o(vita_rx_dst_rdy0), + .data1_i(vita_rx_data1), .src1_rdy_i(vita_rx_src_rdy1), .dst1_rdy_o(vita_rx_dst_rdy1), + .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); // /////////////////////////////////////////////////////////////////////////////////// // DSP TX - wire [15:0] tx_i_int, tx_q_int; + wire [23:0] tx_i_int, tx_q_int; wire run_tx; vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), @@ -170,13 +222,16 @@ module u1plus_core .vita_time(vita_time), .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), - .dac_a(tx_i_int),.dac_b(tx_q_int), + .tx_i(tx_i_int),.tx_q(tx_q_int), .underrun(tx_underrun_dsp), .run(run_tx), .debug(debug_vt)); - - assign tx_i = tx_i_int[15:2]; - assign tx_q = tx_q_int[15:2]; - + + tx_frontend #(.BASE(SR_TX_FRONT), .WIDTH_OUT(14)) tx_frontend + (.clk(wb_clk), .rst(wb_rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .tx_i(tx_i_int), .tx_q(tx_q_int), .run(1'b1), + .dac_a(tx_i), .dac_b(tx_q)); + // ///////////////////////////////////////////////////////////////////////////////////// // Wishbone Intercon, single master wire [dw-1:0] s0_dat_mosi, s1_dat_mosi, s0_dat_miso, s1_dat_miso, s2_dat_mosi, s3_dat_mosi, s2_dat_miso, s3_dat_miso, @@ -277,8 +332,8 @@ module u1plus_core reg_test <= s0_dat_mosi; REG_RX_FRAMELEN : frames_per_packet <= s0_dat_mosi[7:0]; - REG_XFER_RATE : - xfer_rate <= s0_dat_mosi; + //REG_XFER_RATE : + //xfer_rate <= s0_dat_mosi; endcase // case (s0_adr[6:0]) assign test_ctrl = xfer_rate[11:8]; @@ -300,14 +355,16 @@ module u1plus_core // ///////////////////////////////////////////////////////////////////////////////////// // Slave 1, UART // depth of 3 is 128 entries, clkdiv of 278 gives 230.4k with a 64 MHz system clock - + +/* simple_uart #(.TXDEPTH(3),.RXDEPTH(3), .CLKDIV_DEFAULT(278)) uart (.clk_i(wb_clk),.rst_i(wb_rst), .we_i(s1_we),.stb_i(s1_stb),.cyc_i(s1_cyc),.ack_o(s1_ack), .adr_i(s1_adr[3:1]),.dat_i({16'd0,s1_dat_mosi}),.dat_o(s1_dat_miso), .rx_int_o(),.tx_int_o(), .tx_o(debug_txd),.rx_i(debug_rxd),.baud_o()); - +*/ + // ///////////////////////////////////////////////////////////////////////////////////// // Slave 2, SPI @@ -401,9 +458,8 @@ module u1plus_core // Debug circuitry assign debug_clk = { gpif_clk, clk_fpga }; - assign debug = debug0; + assign debug = 0; assign debug_gpio_0 = 0; assign debug_gpio_1 = 0; - //assign {io_tx,io_rx} = {debug1}; endmodule // u1plus_core |